| 1 |
Thermochemical conversion of cedar wood by pyrolysis technology for bio-oil |
Biofuels, 1-9 |
Islam, M. R., Parveen, M., Rahman, M. S., Ferdous, J., Kader, M. A., & Takai, K. |
2023 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 2 |
An energy-efficient pumping system for sustainable cities and society: Optimization, mathematical modelling, and impact assessment |
Energy Reports, 10 (2023), 819-836 |
Hossain, M.S., Islam, M.R., Das, A., Himel, H.H., Das, B. K., Roy, T. K., & Hasan, M. S. |
2023 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 3 |
Energy consumption behavior analysis and experimental investigation of a novel technique for energy-efficient operation of submersible pumping system used in Barind Tract of Bangladesh. |
Energy Efficiency, 16(2), (2023) |
Hossain, M. S., Haque, M. E., Islam, M. R., & Himel, M. H. H. |
2023 |
Book |
ME |
Dr. Mohammad Rofiqul Islam |
| 4 |
Characterization, performance assessment, techno-economic potential, and process optimization of scrap tire pyrolysis in Bangladesh. |
Journal of Cleaner Production (2023) |
Hossain, M. S., Shozib, I. A., Das, B. K., Hossain, M. S., Das, A., Islam, M. R., Kulsuma, M. |
2023 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 5 |
Energy generation and techno-economic potential assessment of anaerobic co-digestion of cow dung with food waste in Bangladesh. |
International Conference on Nano-Bio and Advanced Materials Engineering 7-8 January 2023, Cox’s Bazar, Bangladesh, |
Hossain, M. S., Das, B. K., & Islam, M. R. |
2023 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 6 |
Comparative study of thermal degradation kinetics of two woody biomass samples for bio-oil production |
Sustainable Energy Technologies and Assessments, 52 (2022) 102158 |
Hossain, M. S., Shozib, I. A., & Islam, M. R. |
2022 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 7 |
Field Level Study of Solar PV Powered Irrigation Systems in Bangladesh. |
4th International conference on energy and power (ICEP 2022), MIST, Dhaka, Bangladesh; 11-13 December, 2022. |
A. B. Islam, S. B. Islam, M. R. Islam, M. S. Hossain. |
2022 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 8 |
Comparative study of conversion performance for three groups of solid wastes into biofuels and chemicals by co-pyrolysis technology |
4th International conference on energy and power (ICEP 2022), MIST, Dhaka, Bangladesh; 11-13 December, 2022. |
M. S. Hossain, A. B. Islam, S. B. Islam, M. R. Islam, N. N. Mustafi |
2022 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 9 |
Energy Consumption Behavior Analysis and Investigation of Submersible Pumping System Efficiency in Different Bore well at Rajshahi Division of Bangladesh. |
International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE 2022), 25-27 June, 2022. |
Hossain, M. S., Islam, M. R., Roy, T. K., Mallik, N. I., & Himel |
2022 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 10 |
Energy, Economic, and Environmental benefit Analysis of organic fraction of MSW through anaerobic digestion technology in Bangladesh. |
International Conference on Mechanical, Industrial and Energy Engineering, 22-24 December 2022, Khulna, BANGLADESH. |
Hossain, M. S., Das, B. K., Islam, M. R., Roy, T. K., & Bhowmik, S., Riad, M. I., Nuhash, S. S., & Paul, S. |
2022 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 11 |
Comparative study of thermal degradation kinetics of two woody biomass samples for bio-oil production |
Sustainable Energy Technologies and Assessments, 52 (2022) 102158. |
S. Golder, M.R. Islam, R. Narayanan, S. Golder, M.A. Gafur, R. Pippia, S.K. Tyagi |
2022 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 12 |
Production and physicochemical properties analysis of co-pyrolytic oil derived from scrap tires and sawdust. |
Hossain, M. S., Shozib, I. A., & Islam, M. R. |
Energy Sources; Part A: Recovery, Utilization and Environmental Effects, 1–13, (2021) |
2021 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 13 |
Performance Investigation of Submersible Pumping System. |
International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021) 12 – 14 December 2021, Chattogram, Bangladesh. |
Hossain, M. S., Islam, M. R., Himel, M. H. H., Hasan, M. S., Roy, T. K., & M. N. I. |
2021 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 14 |
Waste to energy: An experimental study of utilizing the agricultural residue, MSW, and e-waste available in Bangladesh for pyrolysis conversion |
Heliyon 7 (2021) e08530 |
M. K. Islam, M. S. Khatun, Md, M. A. Arefin, M. R. Islam, M. Hassan |
2021 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 15 |
Experimental and CFD investigation on the application for aerogel insulation in buildings |
. Energies 2021, 14, 3310 |
S. Golder, R. Narayanan, M. R. Hossain, M. R. Islam |
2021 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 16 |
Energy efficiency improvement of submersible pumps using in Barind area of Bangladesh |
Energy Procedia, ELSEVIER, 160 (2019), pp 123 – 130. |
. E. Haque, M. S. Islam, M. R. Islam, H. Haniu, M. S. Akhter |
2019 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 17 |
N. N. Mustafi, H. Haniu. Production of liquid fuel from co-pyrolysis of polythene waste and rice straw. |
Energy Procedia, ELSEVIER, 160 (2019), pp 116 – 122. |
M. S. Hossain, J. Ferdous, M. S. Islam, M. R. Islam |
2019 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 18 |
Life cycle cost and energy consumption behavior of submersible pumps using in the Barind area of Bangladesh |
Energy Procedia, ELSEVIER, 110 (2017), pp 479 – 485. |
M E Haque, M R Islam, M S Islam, H Haniu, M S Akhter |
2017 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 19 |
Biofuel from co-pyrolysis of solid tire waste and rice husk |
Energy Procedia, ELSEVIER, 110(2017), pp. 453-458 |
M. S. Hossain, M. R. Islam, M. S. Rahman, M. A. Kader, H. Haniu |
2017 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 20 |
Vorticity dissipation associated with vortex pairing within a curved shear layer |
Journal of Fluid Science and Technology. 2017;12(1):JFST0010-. |
Haniu H, Yoneyama K, Islam MR, Takai K, Obata Y, Haque ME |
2017 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 21 |
Biofuel from jute stick by pyrolysis technology |
In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020088). AIP Publishing. |
Ferdous, J., Parveen, M., Islam, M. R., Haniu, H., & Takai, K |
2017 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 22 |
Pyrolysis kinetics study of three biomass solid wastes for thermochemical conversion into liquid fuels |
In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020083). AIP Publishing. |
Tuly, S. S., Parveen, M., Islam, M. R., Rahman, M. S., & Haniu, H. |
2017 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 23 |
Energy consumption behavior of submersible pumps using in the Barind area of Bangladesh. |
In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020039). AIP Publishing. |
Haque, M. E., Islam, M. R., Masud, M. H., Ferdous, J., & Haniu, H. |
2017 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 24 |
Energy Consumption Behavior of Submersible Pumps using in the Barind Area of Bangladesh |
The 7th BSME International Conference on Thermal Engineering, 22 – 24 December 2016, Dhaka, Bangladesh (Published in AIP Proceedings, Vol. 1851, Issue. 1, 19th June, 2017). |
M. E. Haque, M. R. Islam, M. H. Masud, J. Ferdous, H. Haniu |
2017 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 25 |
Fractional Distillation & Characterization of Tire Derived Pyrolysis Oil |
International Journal of Engineering Technologies-IJET, Vol.3, No.1, 2017 |
M. Mia, A. Islam, R. I. Rubel, M. R. Islam |
2017 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 26 |
Upgrading of Waste Tire Pyrolysis Oil to Be Used in Diesel Engine |
Mechanical Engineering Research Journal. Vol. 10, pp. 35-40, 2016 |
A. Khaleque, M. R. Islam, M. S. Hossain, M. Khan, M. S. Rahman and H. Haniu |
2016 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 27 |
Life Cycle Cost and Energy Consumption Behavior of Submersible pumps using in the Barind Area of Bangladesh |
International Conference on Energy and Power, 14-16 December 2016, RMIT University, Australia. |
M E Haque, M R Islam, M S Islam, H Haniu, M S Akhter |
2016 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 28 |
Biofuel from Co-pyrolysis of Solid Tire Waste and Rice Husk. International Conference on Energy and Power |
14-16 December 2016, RMIT University, Australia. |
M. S. Hossain, M. R. Islam, M. S. Rahman, M. A. Kader, H. Haniu |
2016 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 29 |
Pyrolysis decomposition of tamarind seed for alternative fuel |
Bioresource Technology, Vol.149, pp. 1-7, December 2013. |
M.A. Kader, M.R. Islam, M. Parveen, H. Haniu, K. Takai |
2013 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 30 |
Development of a pilot scale pyrolysis plant for production of liquid fuel from waste tire |
Mechanical Engineering Research Journal. 2013;9:54-9. |
Kader MA, Islam MR, Hossain MS, Haniu H |
2013 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 31 |
Thermal recycling of solid tire wastes for alternative liquid fuel: the first commercial step in Bangladesh |
Procedia Engineering, Vol. 56, pp. 573-582, 2013. |
M. R. Islam, M. N. Islam, N. N. Mustafi, M. A. Rahim and H. Haniu |
2013 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 32 |
Unsteady Characteristics of Longitudinal Vortices behind a Stepped Circular Cylinder and Nonlinier Interaction |
Transactions of the japan society of mechanical engineers series b. 2012;78(790):1195-205. |
Haniu H, Kim S, Kitano T, Islam MR, Miyakoshi K. |
2012 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 33 |
Fixed bed fire tube heating pyrolysis of agricultural biomass solid waste: Jute stick is an alternative source of liquid fuels |
Journal of Solid Waste Technology and Management, Vol. 38(1), pp. 58-67, February 2012. |
M. R. Islam, M. Parveen, H. Haniu |
2012 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 34 |
Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology |
Waste Management, Vol. 9-10, pp. 2142-9, September-October 2011. |
M. R. Islam, M. U. H. Joardder, S. M. Hasan, K. Takai, H. Haniu |
2011 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 35 |
Thermal decomposition behavior study of two agricultural solid wastes for production of bio-fuels by pyrolysis technology |
Journal of Thermal Science and Technology, Vol. 6, No. 1, pp. 132-139; April 2011. |
Parveen, M., Islam, M. R. and HANIU, H |
2011 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 36 |
Trends of biofuels derived from renewable biomass as sustainable energy and environmental solution |
In the Proceedings of the Asian Conference on Sustainability, Energy and Environment 2011 (ACSEE -2011), 2-5 June 2011, Osaka, Japan. |
Islam, M. R., Parveen, M. and HANIU, H |
2011 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 37 |
Fast pyrolysis for better utilization of tamarind seed from renewable energy point of view. |
In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011). |
Kader, M., Islam, M. R., & Joardder, M. U. H. |
2011 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 38 |
Pyrolysis of coconut shell for bio-oil. Proceedings of the WasteSafe |
2011 – 2nd International Conference on Solid Waste Management in the Developing Countries, 13-15 February 2011, Khulna, Bangladesh |
Joardder, M. U. H., Islam, M. R., Beg, M., & Alam, R |
2011 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 39 |
Valorization of solid tire wastes available in Bangladesh by thermal treatment. |
Proceedings of the WasteSafe 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries, 13-15 February 2011, Khulna, Bangladesh. |
Islam, M.R., Joardder, M.U.H., Kader, M.A. and Sarker, M.R |
2011 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 40 |
Valorization of solid tire wastes available in Bangladesh by thermal treatment |
In the Proceedings of the WasteSafe 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries 13-15 February 2011, Khulna, Bangladesh. |
Islam, M. R., Joardder, M.U.H., Kader, M.A., Sarker, M.R.I. and HANIU, H |
2011 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 41 |
Thermal Recycling of Solid Tire Wastes for Recovery of Energy and Valuable Chemicals: A Use of Fire-tube Heating Pyrolysis Reactor |
Journal of Solid Waste Technology & Management, 36(3). 2010. |
Islam, M.R. and Haniu, H. |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 42 |
Energy Recovery from Fixed Bed Fire Tube Heating Pyrolysis of Agricultural Waste-Jute Stick. |
Journal of Solid Waste Technology & Management, 36(1). 2010 |
Islam, M.R., Parveen, M. and Haniu, H. |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 43 |
Properties of sugarcane waste-derived bio-oils obtained by fixed-bed fire-tube heating pyrolysis. |
Bioresource Technology, Vol. 101, No. 11; pp. 4162-4168; June 2010. |
Islam, M. R., Parveen, M., and Haniu, H |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 44 |
Innovation in pyrolysis technology for management of scrap tire: a solution of Energy and Environment |
International Journal of Environmental Science and Development, Vol. 1; No.: 1; pp. 89-96; April 2010. |
Islam, M.R., Parveen, M., HANIU, H and Sharker, M. R. |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 45 |
Thermochemical conversion of sugarcane bagasse into bio-crude oils by fluidized-bed pyrolysis technology |
Journal of Thermal Science and Technology, Vol. 5, No. 1; pp. 11-23; February 2010. |
Islam, M. R., Haniu, H., Islam, N. M. and Uddin, M. S. |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 46 |
Decay of vorticity in separated shear layer |
Journal of Fluid Science and Technology, Vol. 5, No. 2, Series B; pp. 331-339; February 2010. |
Haniu, H., Kim, S., Miyakhoshi, K., Takai, K. and Islam, M. R. |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 47 |
Statistical analysis of wind gust at costal sites of Bangladesh. |
International Journal of Energy Machinery, Vol. 3, No. 1, pp. 9 – 17; August 2010. |
Azad, A.K., Alam, M.M. and Islam, M. R. Statistical analysis of wind gust at costal sites of Bangladesh |
2010 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 48 |
Determination of char expulsion pressure and char flow pattern in a biomass pyrolysis reactor |
In the Proceedings of the 13th Asian Congress of Fluid Mechanics,17-21 December 2010, Dhaka, Bangladesh. pp. 651-654. |
Parveen, M., Islam, M. R. and HANIU, H. |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 49 |
Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using fixed bed fire tube heating pyrolysis technology |
In the Proceedings of the Third International Symposium on Energy from Biomass and Waste, 8-11 November 2010, Venice, Italy. |
Islam, M. R., Parveen, M., and Haniu, H |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 50 |
Characterizations of two agricultural wastes in Bangladesh as potential sources of energy: possible use of pyrolysis technology. |
In the Proceedings of the Third International Symposium on Energy from Biomass and Waste, 8-11 November 2010, Venice, Italy. |
Islam, M. R., Parveen, M., and Haniu, H |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 51 |
Determination of char expulsion pressure and char flow pattern in a biomass pyrolysis reactor. |
To be published in the Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. |
Parveen, M. Islam, M.R. and HANIU, H. |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 52 |
Energy recovery from fixed bed fire tube heating pyrolysis of agricultural waste--jute stick |
In the Proceedings of 25th International Conference on Solid Waste Technology and Management (ICSW 2010). 14-17 March 2010, Philadelphia, PA, USA. |
Islam, M. R., Parveen, M., and Haniu, H. |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 53 |
Thermal recycling of solid tire wastes for recovery of energy and valuable chemicals: a use of fire-tube heating pyrolysis reactor |
In the Proceedings of 25th International Conference on Solid Waste Technology and Management (ICSW 2010). 14-17 March 2010, Philadelphia, PA, USA. |
Islam, M. R., Haniu, H. |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 54 |
Thermal recycling of solid tire wastes for valorized products by fire-tube heating pyrolysis reactor |
In the Proceedings of 2010 International Conference on Environmental Science and Engineering, 26-28 February, 2010, Singapore. pp. |
Islam, M. R., Haniu, H. |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 55 |
Advances of technology for bio-crude oils from thermochemical conversion of biomass solid wastes |
In the Proceedings of the Conference on Engineering Research, Innovation and Education 2010 (CERIE 2010), 11-13 January 2010, Sylhet, Bangladesh. pp. 9-16 |
Parveen, M., Haniu, H., Islam, M. R., Islam, M. R |
2010 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 56 |
Transitional characteristic of phase shift in lock-in phenomena of an oscillating cylinder. |
Journal of Fluid Science and Technology, Vol. 4, No. 3; pp. 479-489; May 2009. |
Miyakhoshi, K., Haniu, H., Kim, S., Takai, K. and Islam, M. R |
2009 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 57 |
Pyrolysis kinetics behavior of solid tire wastes available in Bangladesh |
Waste Management, Vol. 29, No. 2; pp. 668-677; February 2009. |
Islam, M. R., Haniu, H. and Fardoushi, J. |
2009 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 58 |
Technology development for bio-crude oil from pyrolysis of renewable biomass resource. |
In the Proceedings of the 1st International Conference on the Developments in Renewable Energy Technology (ICDRET ’09), 17-20 December, 2009, Dhaka, Bangladesh. pp 253-256. |
Islam, M. R., Parveen, M., Islam, M. R. and Haniu, H |
2009 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 59 |
Preliminary investigation for engine performance by using tire-derived pyrolysis oil-diesel blended fuels. |
Journal of Power and Energy Systems, Vol. 2, No. 6; pp. 1359-1372; December 2008. |
Islam, M. R, Haniu, H., Beg, R. A. and Takai, K. |
2008 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 60 |
. Fire-tube heating pyrolysis of car tire wastes: end uses of product liquids as fuels and chemicals |
International Energy Journal, Vol. 9, No. 3; pp: 189-198; September 2008. |
Islam, M. R, Kim, S. I., Haniu H. and Beg, M. R. A |
2008 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 61 |
Fluid dynamics study on a cold model of fixed-bed fire-tube heating pyrolysis reactor for ejection of solid char. |
Journal of Fluid Science and Technology, Vol. 3, No. 7; pp. 826-837; September 2008. |
Islam, M. R, Haniu, H. and Kim, S.I. |
2008 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 62 |
Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: product yields, compositions and related properties |
FUEL, Vol. 87, No. 13-14; pp. 3112-3122; October 2008. |
Islam, M. R., Haniu, H. and Beg, M. R. A. |
2008 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 63 |
Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes. |
Journal of Analytical and Applied Pyrolysys, Vol. 82, No. 1; pp. 96-109; May 2008. |
Islam, M. R., Tushar, M. S. H. K. and Haniu, H. |
2008 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 64 |
Renewable energy resources and technologies practices in Bangladesh. |
Renewable and Sustainable Energy Reviews, Vol. 12, No. 2; pp. 299-343; February 2008 |
Islam, M. R., Islam, M. R. and Beg, M. R. A. |
2008 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 65 |
Limonene-rich liquids from pyrolysis of heavy automotive tire wastes |
Journal of Environment and Engineering, Vol. 2, No. 4; pp. 681-695; October 2007. |
Islam, M. R., Haniu, H. and Beg, M. R. A. |
2007 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 66 |
Promotion of solar energy use in Bangladesh. |
International Energy Journal, Vol. 7, No. 3; pp. 299-343; September 2006. |
Islam, M. R., Islam, M. R. and Beg, M. R. A |
2006 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 67 |
Fuel based liquids from scrap tire by pyrolysis technology |
In the Proceedings of 3nd BSME-ASME International Conference on Thermal Engineering, 20-22 December 2006. Dhaka, Bangladesh. Paper No.: BA-040; pp. 1-6. |
Islam, M.R., Beg, M. R. A. and Haniu, H., |
2006 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 68 |
Pyrolytic oil from fixed-bed pyrolysis of municipal solid waste and its characterization. |
Renewable Energy, Vol. 30, Issue 3; pp. 413-420; March 2005. |
Islam, M.N., Islam, M.N., Beg, R.A. and Islam, M.R. |
2005 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 69 |
Design, fabrication and performance studies of a biomass solid wastes pyrolysis system for alternative liquid fuel production |
Journal of Energy & Environment, Vol. 3; pp. 103-117; May 2004. |
Islam, M.R., Islam, M.N. and Nabi, M.N |
2004 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 70 |
Energy recovery from organic solid wastes by thermochemical conversion technology. |
In the Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004. Dhaka, Bangladesh. Vol. II, pp. 829-836. |
Islam, M.R., Islam, M.N. and Islam, M.D. |
2004 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 71 |
Comparison on heat transfer enhancement between arrays of rectangular type vortex generators and fins of same type |
In the Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004. Dhaka, Bangladesh. Vol. I, pp. 186-192. |
Islam, M.D., Islam, M.R. and Kenyu, O. |
2004 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 72 |
Alternative liquid fuel by pyrolysis technology from available biomass solid wastes in Bangladesh. |
Journal of Mechanical Engineering, Vol. ME 32; pp. 45-54; December 2003. |
Islam, M.R., Islam, M.N. and Islam, M.N. |
2003 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 73 |
Fluidization behavior of solid particles in fast pyrolysis reactor for thermochemical conversion of biomass solid wastes |
Journal of Engineering & Technology, Vol. 2, No. 1; pp. 17-25; June 2003. |
Islam, M.R., Hasan, M.M. and Sarker, B.K. |
2003 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 74 |
The fuel properties of pyrolytic oils derived from carbonaceous solid wastes in Bangladesh |
Jurnal Teknologi, No. 38(A); pp. 75-89; June 2003. |
Islam, M.R., Nabi, M.N. and Islam, M.N |
2003 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 75 |
Fixed bed pyrolysis of sugarcane bagasse for alternative liquid fuel production. |
In Proceedings of the 5th International Conference on Mechanical Engineering, ICME2003, 26-28 December 2003. BUET, Paper No.: ICME03-TH-16, pp. 1-5. |
Islam, M.R., Islam, M.N. and Islam, M.N. |
2003 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 76 |
Aerodynamics and performance study of a V-shaped three bladed Savonious rotor. |
In proceedings of the 7th Asian International Conference on Fluid Machinery, AICFM7, 7-10 October 2003. Fukuoka, Japan. Paper No.: 20004, pp. 1-5. |
Islam, M.R., Islam, M.D., Firoz, M. and Choudhury, O.F.M.M.I. |
2003 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 77 |
Design, fabrication and performance study of a parabolic trough concentrator (PTC) solar cooker using thermic fluid |
In Proceedings of the 3rd International Conference of Mechanical Engineers & 8th Annual Paper Meet on E-manufacturing ICME2003, IEB, 20-22 March 2003. Paper No.:15, pp. 105-116. |
Islam, M.D. Islam, M.R. and Choudhury, S.K. |
2003 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 78 |
Development of an economic heating system for fluidized bed micro-pyrolyzer |
In Proceedings of the 3rdInternational Conference of Mechanical Engineers & 8th Annual Paper Meet on E-manufacturing ICME2003, IEB, 20-22 March 2003. Dhaka Center, Bangladesh. Paper No.: 16, pp. 117-126. |
Islam, M.R. Hasanuzzaman, S. and Motin, M.A. |
2003 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 79 |
Bio-crude-oil from fluidized bed pyrolysis of rice-straw and its characterization |
International Energy Journal, Vol. 3, No. 1; pp. 1-11; June 2002. |
Islam, M.R., Islam, M.N. and Nabi, M.N. |
2002 |
Journal |
ME |
Dr. Mohammad Rofiqul Islam |
| 80 |
Development of efficient cooking system for traditional biomass fuel in Bangladesh. |
In Proceedings of the BSME-ASME International Conference on Thermal Engineering, 31 December 2001-2 January 2002, Dhaka, Bangladesh. pp. 585-591. |
Islam, M.R., Rafy, M.M., Ahmed, S. and Syfullah, A.Z.A., |
2002 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 81 |
Hydrodynamic studies of fluidized bed cold model reactor for thermal conversion of biomass solid waste |
In Proceedings of the BSME-ASME International Conference on Thermal Engineering, 31 December 2001-2 January 2002. Dhaka, Bangladesh. pp. 592-598. |
Islam, M.R., Ahmed, R., Ahsan, S.M.S. and Islam, M.N. |
2002 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 82 |
Characterization of biomass solid wastes for liquid fuel production. |
In Proceedings of the 4th International Conference on Mechanical Engineering, ICME2001, 26-28 December 2001. BUET, Vol. 2 pp. I 77-82. |
Islam, M.R., Nabi, M.N. and Islam, M.N. |
2001 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 83 |
Design of a fluidized bed pyrolysis system for thermochemical conversion of biomass solid waste into liquid fuel. |
In Proceedings of the 2nd International Conference & 7th Annual Paper Meet of the Mechanical Engineering Division, IEB, 25-27 October 2001. Paper No.: 20, pp. 162-171. |
Islam, M.R., Islam, M.N., and Nabi, M.N. |
2001 |
Conference |
ME |
Dr. Mohammad Rofiqul Islam |
| 84 |
Enhancing Bearing Fault Diagnosis Using Transfer Learning and Random Forest Classification: A Comparative Study on Variable Working Conditions |
IEEE Access (IEEE, Q1, IF 3.9), vol. 12, pp. 5986-6000, 2024, doi: 10.1109/ACCESS.2023.3347345. |
D. Saha, M. E. Hoque and M.E.H.Chowdhury |
2024 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 85 |
Managing Blended Human-Robot Collaboration (HRC) Challenges in Industrial Systems: A Review |
Journal of Engineering and Technology, vol. 16, no. 1, pp. 14-25, 2024 |
Md. Ramim-Ul Hasan, Tanjimur Rashid, Hridoy Bhadra, Mohammad Mehedi Hasan, Md. Omar Faruq, Fazlur Rashid, and Md. Emdadul Hoque |
2024 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 86 |
Effects of Dispatch Algorithms and Fuel Variation on Techno-Economic Performance of Hybrid Energy System in Remote Island |
Journal of Energy Storage (Elsevier, Q1, IF 9.4), Vol. 78C, No. 109919, 2024, https://doi.org/10.1016/j.est.2023.109919, Share Link: https://authors.elsevier.com/a/1iOUs,rUrFq8rU |
N. Sakib, M. E. Hoque, et al. |
2024 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 87 |
An Artificial Neural Network-based Model for Predicting Diesel Engine Performance and Emissions using Pyrolytic Plastic Oil Blend with Diesel Fuel |
In Proc. of International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID. 289, 18-19 December, 2023 |
S. Dutta, M. N. U. Khan, and M. E. Hoque |
2023 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 88 |
Sizing Optimization of a Hybrid Power Supply System to Solve the Energy Crisis of an Off-Grid Island in Bangladesh |
In Proc. of International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID. 275, 18-19 December, 2023 |
M. I. Ahmmed, P. Mondol, M. E. Hoque |
2023 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 89 |
Feasibility Study of the Grid-Connected Hybrid Energy System for Supplying Electricity to Support the Health and Education Sector in the Metropolitan Area |
Energies (mdpi/Q1/ IF 3.2), Vol. 16, No. 4, paper ID. 1571, 2023, https://doi.org/10.3390/en16041571 |
M. R. Ahmed, M. R. Hasan, S. Hasan, M. Aziz and M. E. Hoque |
2023 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 90 |
Analysis of the Influences of Temperature, Solar irradiation, Reverse Saturation Current, Series Resistance, and Shunt Resistance on Solar Cell |
In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 216 |
A Das, S D Piu, M E Hoque, A C Diganta |
2022 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 91 |
Energy, Exergy and Efficiency Analysis of Power Generation Sectors of Bangladesh |
In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 222 |
M M Hasan, M A I Asik, and M E Hoque |
2022 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 92 |
Integration of Ion Transport Membrane with Conventional Powerplant to Obtain Pure Oxygen and More Efficient Power Production |
In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 214 |
A Das, S D Piu, M E Hoque, A C Diganta and M Moitro |
2022 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 93 |
Development of Budget-Friendly Sound Assisted Navigation System for People with Visual Impairment |
In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 178 |
A Akter, P Das S Hossain, A K M M Rahman, F Ifad, M Islam, S M R Uddin, M M Islam and M E Hoque |
2022 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 94 |
Development of Intelligent Fault Diagnosis Technique of Rotary Machine Element Bearing: A Machine Learning Approach |
Sensors (mdpi/Q1/IF-3.576), Vol.22, No. 3: 1073. https://doi.org/10.3390/s22031073 |
D.K. Saha, M.E.Hoque, and H. Badihi |
2022 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 95 |
Health Condition Monitoring and Control of Vibrations of a Rotating System through Vibration Analysis |
Journal of Sensors (Q2/IF 2.336), Vol. 2022, Article ID 4281596, pp. 1-12, 2022. https://doi.org/10.1155/2022/4281596 |
Arifur Rahman, Md. Emdadul Hoque, Fazlur Rashid, Firoz Alam and Mim Mashrur Ahmed |
2022 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 96 |
Oxidative Degradation Analysis of Engine and Gear Oil of An Automobile by FTIR Sprectroscopy |
In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 199 |
M M Ahmed, M A Zaman, M N Fariha and M E Hoque |
2022 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 97 |
Condition-Based Predictive Maintenance of Oil Wetted Machinery by In-service Oil Analysis: A Comprehensive Review |
In Proc. of International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, 20-22 December, 2022, Paper ID. 209 |
F Ahmed, U K Paul, M M Ahmed, D K Paul and M E Hoque |
2022 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 98 |
Numerical Investigation of Stress Development In Modified Tooth Polymer Gear With Fiber Reinforcement |
In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021, Paper ID. 153, 12 – 14 December 2021, Chattogram, Bangladesh |
T. Islam, M. S. B. Zaman, M. M. H. Mehedi, M. R. Ahmed, M. E. Hoque |
2021 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 99 |
Numerical Investigation on Modified NACA 2412 Aerofoil with Sinusoidal Leading Edge and The Effect of Its Amplitude and Wavelength |
In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021, Paper ID. 154, 12 – 14 December 2021, Chattogram, Bangladesh |
Islam, T., M. M. H. Mehedi, M. S. B. Zaman, M. R. Ahmed, and Hoque, M. E. |
2021 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 100 |
Numerical Investigation on Effect of Dimple Position on Symmetric Aerofoil at Higher Angle of Attack |
In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021, Paper ID. 155, 12 – 14 December 2021, Chattogram, Bangladesh |
Islam, T., M. R. Ahmed, M. M. H. Mehedi, and Hoque, M. E. |
2021 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 101 |
Fuel property improvement and exhaust emission reduction, including noise emissions using an oxygenated additive to waste plastic oil in a diesel engine |
Biofuels, Bioproducts & Biorefining (Wiley, IF=5.239), Vol. 15, No. 6, pp. 1650-1674, DOI: 10.1002/bbb.2262 |
Hussam, W.K., Nabi, M.N., Chowdhury, M.W., Hoque, M.E., Rashid, A.B., and Islam, M.T. |
2021 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 102 |
A Review on Condition Monitoring of Automobile IC Engine Through Used Oil Analysis |
in Proceeding of the 6th International Conference on Engineering Research, Innovation and Education 2021, Paper ID. 117, 26-28 February, 2021, SUST, Sylhet, Bangladesh. |
Hoque, M. E., Ahmed, M.M., Rahman, A., and M. S. Zaman |
2021 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 103 |
Investigation of optimal hybrid energy systems using available energy sources in a rural area of Bangladesh |
Energies (Q1, IF-3.2), Vol.14, No. 18, Paper ID: 5794, doi: https://doi.org/10.3390/en14185794. |
Rashid, F., Hoque, M. E., Aziz, M., Sakib, N., Islam, M.T., and Robin, M.R.M. |
2021 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 104 |
Prediction of COVID-19 Cases from the Nexus of Air Quality and Meteorological Phenomena: Bangladesh Perspective |
Earth Systems and Environment (Springer Nature, Q1, IF 9.11), vol. 6, pp. 307-325, 2021, https://doi.org/10.1007/s41748-021-00278-7 |
M. M. Ahmed, M. E. Hoque, S. Rahman, P. K. Roy, F. Alam, M. M. Rahman, M. M. Rahman and P. K. Hopke |
2021 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 105 |
IoT-based intelligent solar energy harvesting technique with improved efficiency |
In Artificial Intelligence and Internet of Things for Renewable Energy Systems, Neeraj Priyadarshi (Ed.), De Gruyter, Germany, DOI: 10.1515/9783110714043-009 |
M.E.Hoque, D.K. Saha and D. Rakshit |
2021 |
Book |
ME |
Dr. Md. Emdadul Hoque |
| 106 |
Municipal Solid Waste Management and Waste-to-Energy Potential from Rajshahi City Corporation in Bangladesh |
Applied Sciences (MDPI/Q1/IF 2.474), Vol.11, No.9, paper ID. 3744, doi: https://doi.org/10.3390/app11093744 |
Habib, M.A., M. M. Ahmed, Aziz, M., Beg, M.R.A., and Hoque, M. E. |
2021 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 107 |
Fault Classification of Deep Groove Ball Bearing using Multi-Class Support Vector Machine with One Versus All Approach |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE), CUET, Bangladesh, Paper ID. 86, 12-14 December, 2021 |
D. K. Saha and M. E. Hoque |
2021 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 108 |
Gasification and Power Generation Characteristics of Rice Husk, Saw Dust, and Coconut Shell Using a Fixed-Bed Downdraft Gasifier |
Sustainability (MDPI/Q2/IF 2.576), Vol.13, No.4, paper ID. 2027, doi: https://doi.org/10.3390/su13042027, 2021 |
Hoque, M. E., Rashid, F., and Aziz, M. |
2021 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 109 |
Gasification Process Using Downdraft Fixed-Bed Gasifier for Different Feedstock |
Gasification, Valter Silva (Ed.), Intechopen Publications, Croatia, ISBN 978-1-83968-796-9, DOI: 10.5772/intechopen.96227 |
Hoque, M. E. and Rashid, F. |
2021 |
Book Chapter |
ME |
Dr. Md. Emdadul Hoque |
| 110 |
Co-Pyrolysis of Biomass Solid Waste and Aquatic Plants |
Gasification, Valter Silva (Ed.), Intechopen Publications, Croatia, ISBN 978-1-83968-796-9, DOI: 10.5772/intechopen.96228 |
Hoque, M. E. and Rashid, F. |
2021 |
Book Chapter |
ME |
Dr. Md. Emdadul Hoque |
| 111 |
Design and Optimization of a Hybrid Energy System for Sustainable Development at Rural Areas in Bangladesh |
In Proceedings of the 3rd International Conference on Energy and Power, Chiang Mai, Thailand, Paper ID. 103, 18-20 November, 2021 |
M. E. Hoque, N. Sakib, F. Alam, M. M. Ahmed, F. Rashid and S. Chattopadhyaya |
2021 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 112 |
Remaining Useful Life Prediction of a Motor Gear Test Rig using Autoencoder and Gated Recurrent Unit |
in CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, KUET, Bangladesh, Paper ID. ICMIEE20-231, 19-21 December, 2020. |
Ahmed, S., Hoque, M. E., and Saha, D.K. |
2020 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 113 |
Vibration Based Fault Diagnosis of Spur Gear Operating Under Constant Speed Using Time Synchronous Averaging Method |
in CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, KUET, Paper ID. ICMIEE20-229, Bangladesh, 19-21 December, 2020 |
Saha, D. K. and Hoque, M. E. |
2020 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 114 |
Development of a Magnetic Suspension System Using PD Controller |
International Journal of Mechatronics and Manufacturing Technology, Vol. 5, No.1, pp. 1-13 |
Hossain, M. B., Hoque, M. E. and Islam, M.R. |
2020 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 115 |
Development of a Cost Effective Magnetic Levitation System Using PIC12F683 Microcontroller and Photo sensor |
International Journal of Scientific Research and Engineering Development, Vol. 3, No. 1, pp. 351-358 |
Hossain, M. B., Hoque, M. E., Rashid, F., Mizuno, T. and Ishino, Y. |
2020 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 116 |
Condition Monitoring of An Automobile IC Engine and Gearbox Through Used Oil Analysis |
In CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, KUET, Bangladesh, Paper ID. ICMIEE20-067, 19-21 December, 2020 |
Hoque, M. E., Ahmed, M.M., and Rahman, A. |
2020 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 117 |
Modeling and Control of a Magnetic Suspension System Using an Analog Controller |
Acta Electronica Malaysia, Vol. 3, No.2, pp. 41-44 |
Rasid, S.M.R., Hossain, M. B., Hoque, M. E., Azam Arif, M.A. and Sarder, M.S.A. |
2019 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 118 |
Investigation of Machinery Health Analysing Characteristics of Vibration Using Comprehensive Experimental Setup |
International Journal of Scientific Research and Engineering Development, Vol. 2, No. 3, pp. 355-361 |
Rahman, A., Hoque, M. E., Noor, S.S. |
2019 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 119 |
Development of a Solar Magnetic Suspension System Using PD Controller |
In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. AM-13, 17-19 December, 2019 |
Hossain, M. B., Hoque, M. E., Mizuno, T. and Ishino, Y. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 120 |
Optimization of Link-Based Power Transmission System Designed for Offset Parallel Shaft Arrangemnet |
In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. AM-15, 17-19 December, 2019 |
Ferdous, O., Sultana, M.M., and Hoque, M. E. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 121 |
Numerical Analysis of Solar Water Heater using Water-Glycerin Solution |
In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. ET-18, 17-19 December, 2019 |
Islam, T., Zaman, M.S.B., Rashid, F., and Hoque, M. E. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 122 |
Towards an Improved design of Solar PV/T Collector and Investigation on PV Cell Performance Coupled with Air Cooling System |
In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. ET-19, 17-19 December, 2019 |
Islam, T., Hoque, M. E., Rashid, F., and Zaman, M.S.B. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 123 |
Towards the Potential Applications of Waste Heat Energy: A Review |
In CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. ET-04, 17-19 December, 2019 |
Akram, M.W., and Hoque, M. E. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 124 |
A Numerical Comparative Study on Heat Generation Pattern for Different Materials Based on Eigenfrequencies |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-109, 11-13 December, 2019 |
Islam, T., Zaman, M.S.B., Hoque, M. E., and Rashid, F. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 125 |
Investigating the Effect of Various Angles of Divergence of a Conical Rocket Nozzle During Boost Phase |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-110, 11-13 December, 2019 |
Islam, T., Zaman, M.S.B., Hoque, M. E., and Rashid, F. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 126 |
Development of a Vertical Translation Magnetic Levitation System Using PIC12F683 Microcontroller |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-214, 11-13 December, 2019 |
Hossain, M. B., Hoque, M. E., Mizuno, T. and Ishino, Y. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 127 |
Analyses of an Efficient Multi-angular Power Transmission Arrangement by Employing Kinematic Chain Joint Links |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, CUET, Chattogram, Bangladesh, Paper ID. ICMERE2019-PI-237, 11-13 December, 2019 |
Ferdous, O., Sultana, M.M. and Hoque, M. E. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 128 |
A Numerical Comparative Study on Heat Generation Pattern for Different Materials Based on Eigenfrequencies |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID.194, 18-20 December, 2019 |
Islam, T., Zaman, M.S.B., Hoque, M. E., and Rashid, F. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 129 |
A Supervisory Control of Home Appliances Using Internet of Things |
In CD-ROM Proceedings of the 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), CUET, Chattogram, Bangladesh, Paper ID. 5671089, 7-9 February, 2019 |
Roy, P.N., Armin, M., Kamruzzaman, S.M., and Hoque, M.E. |
2019 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 130 |
Improvement of Transient Behavior of a Displacement Cancellation Controlled System with Feedforward Control |
Journal of Engineering and Applied Science, Vol. 3, No. 2, pp. 66-75 |
Shahadat, M.M.Z., Hoque, M.E., Mustafi, N.N., and Mizuno, T. |
2019 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 131 |
FEA of Locally Found Mild Steel for Constructing Propeller Shaft of CNG Driven Three-Wheeler |
Journal of Mechanical Engineering and Biomechanics, Vol. 3, No. 3, pp. 14-24 |
Rubel, R.I., Iqbal, M.J., and Hoque, M. E. |
2018 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 132 |
Process Analysis and Gasification of Rice Husk by Using Downdraft Fixed Bed Gasifier |
In CD-ROM Proceedings of the International Conference on Thermal Engineering, BUET, Dhaka, Bangladesh, Paper ID.215, 19-21 December, 2018 |
Hoque, M. E., Rashid, F., and Das, P. |
2018 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 133 |
Realization of Infinite Stiffness Using PID Controller |
In CD-ROM Proceedings of the International Conference on Computer, Communication, Chemical, Material and Electronic Engineering, RU, Rajshahi, Bangladesh, doi: 10.1109/IC4ME2.2018.8465590., 8-9 February, 2018. |
Hoque, M. E., Sayeed, S., Mursalin, R., Puja, P.C., and Insan, M.S. |
2018 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 134 |
Energy Enhancement of Two Pass Solar Collector with Steel Matrix in the Region of Rajshahi, Bangladesh |
International Journal of Mechanical Engineering and Automation, Vol. 4, No. 2, pp. 73-78 |
Roy, A., Hoque, M.E., Islam, M. S., Sarker, M. R.I., and Das, B.K. |
2017 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 135 |
Surface Properties Modification of Zirconia Toughened Alumina by Using Titania Additives |
Colloids and Surface Science, Vol. 2, No. 1, pp. 1-5 |
Mahmood, A.A., Gafur, M.A. and Hoque, M.E. |
2017 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 136 |
Effect of MgO on the Physical, Mechanical and Microstructural Properties of ZTA-TiO2 Composites |
Materials Science &Engineering A (Elsevier), vol. 707, pp. 118-124 |
Mahmood, A.A., Gafur, M.A. and Hoque, M.E. |
2017 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 137 |
Single Degree of Freedom Motion Control of a Magnetically Suspended Object Using Analog Controller |
DUET Journal, vol. 3, Issue 1, pp. 51-55 |
Hoque, M.E., Mourshed, M., Rashid, F., Sarkar, A., and Alam, R. |
2017 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 138 |
Welding Joint Evaluation of Mild Steel Samples for Varying Current and Voltage to Reduce the Defect Using Non-Destructive Testing |
In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. MS-248, 28-30 December, 2017 |
Hoque, M. E., Hasan, M.J., and Hasan, M.K. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 139 |
Design and Construction of a DC Motor Driven Agitator for Lab-scale Work Agitation Purposes |
In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. RT-101, 28-30 December, 2017 |
Ahmed, S., Serker, A., and Hoque, M. E. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 140 |
Prospects of Solar Powered Air Conditioning Systems in Bangladesh and Comparative Analysis with Conventional Systems |
In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. TE-152, 28-30 December, 2017 |
Sami Ahbab Chowdhury, Shaikh Sumit Noor, Oishwarjya Ferdous, Md. Emdadul Hoque |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 141 |
Transient Peak Reduction by Feedforward Control in Zero-compliance System with Displacement Cancellation Technique |
In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Materials Engineering, RUET, Bangladesh, Paper ID. AM-274, 28-30 December, 2017 |
Mhia Md. Zaglul Shahadat, Nirendranath Mustafi, Md. Emdadul Hoque and Takeshi Mizuno |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 142 |
Development of Solar Oven with Automatic Tracking System |
In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017 |
Hoque, M. E., Rashid, F., Alam, J and Rahman, P. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 143 |
Performance Analysis and Investigation for the development of Energy Efficient Building |
In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017 |
Rashid, F., Hoque, M. E., Peash, K. I., Faisal, F., Alum, M.A., and Islam, M.S. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 144 |
Investigation of the behavior of Mechanical Structures Due to Vibration Using ANSYS |
In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017 |
Hoque, M. E., Nur, S. S., Ferdous, O. and Sultana, M. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 145 |
Analysis of Machinery Health Considering the Parameters of Vibration in a Multi-Functioning Arrangement |
In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 18-20 December, 2017 |
Rahman, A., Hoque, M. E., Nur, S. S., and Anam, M. S. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 146 |
Investigation of Welding Joint for Varying Current and Voltage to Minimize the Defect Using Non-Destructive Testing |
In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID: 252, 20-22 December, 2017 |
Hoque, M. E., Hasan, M.J., and Hasan |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 147 |
Analysis of Energy Consumption and Efficiency to Reduce Power Losses in Industrial Equipment |
In CD-ROM Proceedings of the 4th International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, Paper ID: 12, 20-22 December, 2017 |
Hoque, M. E., Rashid, F., Prodhan, M.Y., Arman, A., Alum, M.A. and Islam, M.S. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 148 |
Single Degree Motion Control Using Magnetic Levitation System |
In CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Applied Sciences, MIST, Dhaka, Bangladesh, 22-23 February, 2017 |
M. Mourshed, Rashid, F., Sarker, A., Hoque, M. E., and Masud, M. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 149 |
Development of a Novel Magnetic Suspension System |
4th International Conference on Engineering Research, Innovation and Education 2017, SUST, Sylhet, Bangladesh, Paper ID. 267, 13-15 January, 2017 |
M. B. Hossain and Hoque, M. E. |
2017 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 150 |
Analysis of a CNG Driven Three Wheeler Drive Shaft |
Applied Mechanics and Materials, Vol. 860, pp. 93-98 |
Rubel, R.I., Iqbal, M.J., and Hoque, M. E. |
2016 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 151 |
Design and Construction of a Magnetic Levitation System Using Programmable Logic Controller |
American Journal of Mechanical Engineering, Vol. 4, No. 3, pp. 99-107 |
Ahmed, M., Hossen, M. F., Hoque, M.E., Farrok, O. and Mynuddin, M. |
2016 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 152 |
Experimental Investigation of single Pass Solar Air Heater with and without Square Steel Wire Mesh on Absorber Plate |
in the CD-ROM Proceedings of the 4th International Conference on Mechanical, Industrial and Energy Engineering 2016, KUET, Khulna, Bangladesh, Paper ID. ICMIEE-PI-160378, 26-27 December, 2016 |
Roy, A., Islam, M.S., Hoque, M. E., Sarker, M.R.I. |
2016 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 153 |
Performance Analysis of Double Pass Solar Air Heater With Packed Bed Porous Media in Rajshahi |
in the CD-ROM Proceedings of the 7th BSME International Conference on Thermal Engineering 2016, BUET, Dhaka, Bangladesh, December, 2016 |
Roy, A., and Hoque, M. E. |
2016 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 154 |
Oil Extraction from Pine Seed (Polyalthia longifolia) by Solvent Extraction Method and its Property Analysis |
Procedia Engineering (Elsevier), Vol. no. 105, pp. 613-618 |
Islam, M.N., Sabur, A., Ahmmed, R., and Hoque, M. E. |
2015 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 155 |
A Vibration Control System Using Negative Stiffness Mechanism |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper ID: 253, 18-20 December, 2015 |
Hoque, M. E., Rashid, F., Saad, A.M., and Islam, M. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 156 |
Optimization of Truss Structure Using Finite Element Analysis |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper ID: 426, 18-20 December, 2015 |
Hoque, M. E., Biswas, S. and Khan, M. I. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 157 |
Analysis of a CNG Auto Rickshaw Drive Shaft |
in the CD-ROM Proceedings of the International Conference on Materials and Manufacturing Engineering 2015, IUT, Dhaka, Bangladesh, Paper ID. 125, 25-27 December, 2015 |
Hoque, M. E., Rubel, R.I., Iqbal, M.J. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 158 |
Prospect of Mild Steel as CNG Auto Rickshaw Drive Shaft |
in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015, RUET, Rajshahi, Bangladesh, Paper ID. MS-08, 11-13 November, 2015 |
Hoque, M. E., Rubel, R.I., Iqbal, M.J., and Uddin, M.K. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 159 |
Survey on Socio-economic Impact of Battery Operated Auto Rickshaw in Jessore City |
in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015, RUET, Rajshahi, Bangladesh, Paper ID. RT-67, 11-13 November, 2015 |
Kabir, K. M. R., Arefin, S., Halder, P.K., Paul, N. and Hoque, M. E. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 160 |
Renovation of Automation with Human Resources in Industrial Sector in Bangladesh |
in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015, RUET, Rajshahi, Bangladesh, Paper ID. IE-25, 11-13 November, 2015 |
Zaman, A.S.M. S., Halder, P.K., Hoque, A.S.M.M., Islam, M.T. and Hoque, M. E. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 161 |
Production of Electricity from Renewable Energy Sources for Home Appliances and Nano-Grid |
In CD-ROM Proceedings of the 3rd International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, 26-29 December, 2015 |
Hoque, M. E., Biswas, A., Rashid, F., Saad, A. M., and Bir, P. |
2015 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 162 |
Municipal Solid Waste and its Management in Rajshahi City, Bangladesh: A Source of Energy |
International Journal of Renewable Energy Research, Vol. 4, No. 1, pp. 168-175 |
P.K. Halder, N. Paul, M. E. Hoque, A. S. M. Hoque, M. S. Parvez, Md. H. Rahman, M. Ali |
2014 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 163 |
Prospects of Harvesting Energy from Vibration in Bangladesh |
Procedia Engineering (Elsevier), Vol. no. 90, pp. 166-171 |
A. Rahman and Hoque, M. E. |
2014 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 164 |
Development of Programmable Logic Controller Based Self Controlled Egg Incubator |
In CD-ROM Proceedings of the 3rd International Conference on Mechanical, Industrial and Energy Engineering, KUET, Khulna, Bangladesh, Paper ID: ICMIEE-PI-140266, 26-27 December, 2014 |
A. H. Zaman, M. J. Hossen, Hoque, M. E. and S. Sarker |
2014 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 165 |
Prospects of Harvesting Energy from Vibration in Bangladesh |
In CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper ID: 292, 20-21 December, 2013 |
A. Rahman and Hoque, M. E. |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 166 |
Motion Control of a Magnetically Suspended Object by PD Controller |
In CD-ROM Proceedings of the 2nd International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-127, 24-27 December, 2013 |
Hoque, M. E., A. Sarker and M. Mourshed |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 167 |
Harvesting Energy from Sound Using Electromechanical System |
In CD-ROM Proceedings of the 2nd International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-121, 24-27 December, 2013 |
A. Rahman and Hoque, M. E. |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 168 |
Development of an Automatic Humidity Control System |
in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2013, RUET, Rajshahi, Bangladesh, Paper ID. AM-20, 1-3 November, 2013 |
Hoque, M. E., and Rashid, S. M. |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 169 |
Design, construction and performance test of a portable solar cooker |
in the CD-ROM Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2013, RUET, Rajshahi, Bangladesh, Paper ID. ET-29, 1-3 November, 2013 |
M.A. Kader, Raju Ahamed, M.A. Rahim, B.K. Das, M.E. Hoque, S.M.N. Hoque, S.M. Rasid |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 170 |
Extracting Energy from Revolving Doors |
in CD-ROM Proceedings of the 2nd International Conference on Mechanical, Industrial and Energy Engineering 2012, KUET, Khulna, Bangladesh, Paper MIE-12-074, 1-2 February, 2013 |
Hossain, M. B., Hoque, M. E., Zaved, A., Islam, Z., and Kader, M. A. |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 171 |
Generation of Electricity from Speed Breaker |
in CD-ROM Proceedings of the International Conference on Education, Research and Innovative Engineering 2013, Sylhet, Bangladesh, 11-13 January, 2013 |
Hoque, M. E., and Hossain, M. B. |
2013 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 172 |
Harvesting Energy From Speed Breaker |
International Journal of Energy Machinery, (KOCEN, Korea), Vol. 5, No. 1, paper no. KOCEN12J112, pp. 100-105 |
Billah, M. M., Rahman, A. A., Hoque, M. E., and Hossain, M. B. |
2012 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 173 |
A Modified Zero-Power Control and Its Application to Vibration Isolation System |
Journal of Vibration and Control (SAGE Publications-USA), Vol. 18, No. 12, pp. 1788-1797 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M. |
2012 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 174 |
Electrical Energy Harvesting from Speed Breaker |
in CD-ROM Proceedings of the International Conference on Electrical, Computer and Telecommunications Engineering 2012, RUET, Rajshahi, Bangladesh, pp. 617-620, 28-29 December, 2012 |
Hoque, M. E., Hossain, M. B. and Kader, M. A. |
2012 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 175 |
Development of a Temperature Control System Using Programmable Logic Controller |
in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. AM-13, 28-29 September, 2012 |
Hoque, M. E., Saha, D. K. and Islam, M. R. |
2012 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 176 |
Design and Construction of an Automatic Water Tap |
in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. AM-09, 28-29 September, 2012 |
Rahim, M. A., Kader, M. A., Hoque, M. E., Rifat, M. A. A., Hasan, S. M. |
2012 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 177 |
Harvesting Energy From Spinning Doors |
in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. ET-05, 28-29 September, 2012. |
Hossain, M. B. and Hoque, M. E. |
2012 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 178 |
Municipal Solid Waste Management and Characterization in Rajshahi City of Bangladesh |
in CD-ROM Proceedings of the 6th International Mechanical Engineering Conference and 14th Annual Paper Meet-2012, IEB, Dhaka, Bangladesh, Paper ID. ET-06, 28-29 September, 2012 |
Halder, P. K., Paul, N. and Hoque, M. E. |
2012 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 179 |
Harvesting Energy From Speed Breaker |
in CD-ROM Proceedings of the 5th BSME International Conference on Thermal Engineering, IUT, Gazipur, Bangladesh, Paper ID. 181, 21-23 December, 2012 |
Hoque, M. E. and Hossain, M. B. |
2012 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 180 |
Application of Feedforward Control to a Vibration Isolation System Using Negative Stiffness Suspension |
Journal of System Design and Dynamics (JSME-Japan), Vol. 5, No. 5, pp. 777-788 |
Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M. |
2011 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 181 |
A Three-Axis Vibration Isolation System Using Modified Zero-Power Controller with Parallel Mechanism Technique |
Mechatronics (Elsevier Ltd.) Vol. 21, No. 6, pp. 1055-1062 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M. |
2011 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 182 |
Inventory Management of Pharmaceutical Industries in Bangladesh |
in CD-ROM Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, Paper no. ICME11-RT-049, 18-20 December, 2011 |
Hoque, M. E. and Paul, N. |
2011 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 183 |
Automatic Priming of Centrifugal Pump |
in CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-027, 22-24 December, 2011 |
Hoque, M. E., Choudhury, T. T. and Newaz, A. A. R. |
2011 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 184 |
RFID Technology in Pharmaceutical Inventory Management |
in CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-153, 22-24 December, 2011 |
Paul, N., Choudhury, T. T. and Hoque, M. E. |
2011 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 185 |
Loss to Assets: Production of Power from Speed Breaker |
in CD-ROM Proceedings of the 1st International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, Paper no. PI-065, 22-24 December, 2011 |
Joardder, M. U. H., Kabir, M. M., Barua, R. and Hoque, M. E. |
2011 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 186 |
Development of an Active Vibration Isolation System Using Linearized Zero-Power Control with Weight Support Springs |
ASME Journal of Vibration and Acoustics (ASME-USA), Vol. 132, No. 4, paper no. 041006 |
Hoque, M. E., Mizuno, T., Kishita, D., Takasaki, M., and Ishino, Y. |
2010 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 187 |
A Six-Axis Vibration Isolation System Using Active Zero-Power Control Supported by Passive Weight Support Mechanism |
Journal of Sound and Vibration (Elsevier Ltd.), Vol. 329, No. 17, pp. 3417-3430 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M. |
2010 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 188 |
Active Flutter Control - Basics, Analysis and Application to Rotating Disks |
LAP Lambert Academic Publishing AG & Co. KG, Germany, ISBN: 978-3-8383-6851-1 |
Hoque, M. E. |
2010 |
Book |
ME |
Dr. Md. Emdadul Hoque |
| 189 |
Magnetic Levitation Technique for Active Vibration Control |
in Magnetic Bearings, Theory and Applications, Bostjan Polajzer (Ed.), Sciyo Publications, Croatia, ISBN 978-953-307-148-0 |
Hoque, M. E. and Mizuno, T. |
2010 |
Book |
ME |
Dr. Md. Emdadul Hoque |
| 190 |
Development of a Multi-Degree-of-Freedom Vibration Isolation System Using Parallel Mechanism |
in CD-ROM Proceedings of the 17th International Congress on Sound and Vibration (ICSV17), Cairo, Egypt, paper no. 876, 18-22 July, 2010 |
Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M. |
2010 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 191 |
Application of feedforward control to a Vibration Isolation System Using Negative Stiffness Suspension |
in the CD-ROM Proceedings of the 10th International Conference on Motion and Vibration Control (MOVIC), Tokyo, Japan, paper no. 10058, 17-20 August, 2010 |
Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M. |
2010 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 192 |
A Parallel Mechanism Based Vibration Isolation System Using Negative Stiffness |
in Proceedings of the 2010 IEEE International Conference on Measurement and Control Engineering (ICMCE2010), Chengdu, China, paper no. W30034, pp. 672-676, 16-18 November, 2010 |
Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M. |
2010 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 193 |
A Modular-Type Three-Axis Vibration Isolation System Units Using Negative Stiffness |
in CD-ROM Proceedings of the 2010 ASME Dynamic Systems and Control Conference (ASME-DSC), Cambridge, Massachusetts, USA, paper no. DSCC2010-4128, 13-15 September, 2010 |
Hoque, M. E., Mizuno, T, Ishino, Y. and Takasaki, M. |
2010 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 194 |
A 3-DOF Modular Vibration Isolation System using Zero-Power Magnetic Suspension with Adjustable Negative Stiffness |
in Proceedings of the IEEE 11th International Workshop on Advanced Motion Control, Nagaoka, Japan, paper no. NF-003107, pp. 661-666, 21-24 March, 2010 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M. |
2010 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 195 |
A Vibration Isolation System Using Stiffness Variation Capability of Zero-Power Control |
in CD-ROM Proceedings of the International Conference on Mechanical Engineering 2009 (ICME2009), Dhaka, Bangladesh, paper no. ICME09-AM-20, 26-28 December, 2009 |
Hoque, M. E., Mizuno, T, Shahadat, M. M. Z., Ishino, Y. and Takasaki, M. |
2009 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 196 |
Development of a Module-type Vibration Isolation System Using Zero-Power Control |
in Proceedings of the First Japan-Korea International Joint Symposium on Dynamics and Control in Dynamics and Design Conference (J-K Symposium/DDC), Hokkaido, Japan, Paper no. J17, 4-6 August, 2009 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M. |
2009 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 197 |
An Application of Nonlinear Compensation to Six-Axis Vibration Isolation System Using Zero-Power Control |
in CD-ROM Proceedings of the Sixteenth International Congress on Sound and Vibration (ICSV16), Krakow, Poland, Paper no. 671, 5-9 July, 2009 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki, M. |
2009 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 198 |
Making Biodiesel and Performance Test of a Diesel Engine Using Diesel -Biodiesel Blends as a Fuel with Inlet Air Preheating Attachment |
in CD-ROM Proceedings of the International Conference in Mechanical Engineering 2007 (ICME2007), Dhaka, Bangladesh, paper no. 103 (ICME07-Th-14), 30 December 2007-1 January 2008 |
Shahadat, M. M. Z. and Hoque, M. E. |
2008 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 199 |
Horizontal Motion Control in a Six-Axis Hybrid Vibration Isolation System using Zero-Power Control |
in CD-ROM Proceedings of the 12th Asia Pacific Vibration Conference 2007, Sapporo, Japan, paper no. 154, 6-9 August, 2007 |
Hoque, M. E., Mizuno, T., Takasaki, M., and Ishino, Y. |
2007 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 200 |
An Active Control of Vibration Isolation System Using Zero-Power Magnetic Suspension |
in CD-ROM Proceedings of the ASME International Student Conference 2006, Istanbul, Turkey, May 26-28, 2006 |
Hoque, M. E. and Mizuno, T. |
2006 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 201 |
Development of a Three-Axis Active Vibration Isolator Using Zero-Power Control |
IEEE/ASME Transactions on Mechatronics (IEEE-USA), Vol. 11, No. 4, pp. 462-470 |
Hoque, M. E., Takasaki, M., Ishino, Y. and Mizuno, T. |
2006 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 202 |
A Nonlinear Compensator of Zero-Power Magnetic Suspension for Zero-Compliance to Direct Disturbance |
Transaction of the Society of Instrument and Control Engineers (SICE-Japan), Vol. 42, No. 9, pp. 1008-1016 |
Hoque, M. E., Mizuno, T., Takasaki, M. and Ishino, Y. |
2006 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 203 |
An Active Microvibration Isolator with Zero-Power Controlled Magnetic Suspension Technology |
JSME International Journal, Series C (JSME-Japan), Vol. 49, No. 3, pp. 719-726 |
Hoque, M. E., Takasaki, M. Ishino, Y., Suzuki, H. and Mizuno, T. |
2006 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 204 |
An Active Zero-Power Control with a Passive Technique for Vibration Isolation System |
in CD-ROM Proceedings of the IEEE International Conference on Industrial Technology, Mumbai, India, paper ID. IF-006203, pp. 1309-1314, 15-17 December, 2006 |
Hoque, M. E., Mizuno, T., Ishino, Y. and Takasaki |
2006 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 205 |
A Nonlinear Compensator for Zero-Power Control and Its Application to Vibration Isolation System |
in CD-ROM Proceedings of the 2005 ASME/IEEE International Conference on Mechatronic and Embedded Systems and Application (IDETC/CIE 2005), Long Beach, California, USA, paper no. DETC2005-85175, 24-28 September, 2005 |
Hoque, M. E., Kamiya, T., and Mizuno, T. |
2005 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 206 |
Vibration Isolation System using Zero-power Magnetic Suspension with a Weight Suspension Mechanism |
in CD-ROM Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, paper ID. 02625, 4-8 July, 2005 |
Mizuno, T., Kishita, D., Hoque, M. E., Takasaki, M., and Ishino, Y. |
2005 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 207 |
Vibration Isolation System Using Zero-Power Magnetic Suspension (Experimental Study on System with a Weight Support Mechanism) |
in Proceedings of the Dynamics and Design Conference 2005 and 9th Motion and Vibration Control Conference (MOVIC), Niigata, Japan, Paper no. B33, pp. 340-344, 23-25 August, 2005 |
Hoque, M. E., Kishita, D., Takasaki, M., Ishino, Y. and Mizuno, T. |
2005 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 208 |
A Nonlinear Compensator for Zero-Power Control System |
in CD-ROM Proceedings of the International Conference on Instrumentation, Control and Information Technology, Okayama, Japan, pp. 2273-2278, 8-10 August, 2005 |
Hoque, M. E., Kamiya, T., Takasaki, M., Ishino, Y. and Mizuno, T. |
2005 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 209 |
An Active Microvibration Isolator with Magnetic Suspension Technology |
in Proceedings of the First International Symposium on Advanced Technology of Vibration and Sound, Hiroshima, Japan, Paper no. 221, pp. 299-304, 1-3 June, 2005 |
Hoque, M. E., Takasaki, M., Ishino, Y. and Mizuno, T. |
2005 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 210 |
An Experimental Study on Feedback Control of Rotating Disk Flutter |
Journal of Fluids and Structures, (Elsevier Ltd.), Vol. 20, pp. 71-80 |
Huang, X. Y., Hoque, M. E., and Wang, X. |
2005 |
Journal |
ME |
Dr. Md. Emdadul Hoque |
| 211 |
Design of a Mode-Based Controller for 3-DOF Vibration Isolation System |
in CD-ROM Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics, Singapore, pp. 478-483, 1-3 December, 2004 |
Hoque, M. E., Takasaki, M., Ishino, Y. and Mizuno, T. |
2004 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 212 |
Introduction of Weight Support Mechanism to Vibration Isolation System Using Zero-Power Magnetic Suspension |
in CD-ROM Proceedings of the 7th International Conference on Motion and Vibration Control (MOVIC 2004), St. Louis, USA, paper no. 133, 8-11 August, 2004 |
Kishita, D., Takasaki, M., Ishino, Y., Hoque, M. E., and Mizuno, T. |
2004 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 213 |
Proposal of An Active Vibration Isolation System with a Parallel Mechanism Using Zero-Power Magnetic Suspension |
in CD-ROM Proceedings of the 7th International Conference on Motion and Vibration Control (MOVIC 2004), St. Louis, USA, paper no. 134, 8-11 August, 2004 |
Ishigami, T., Takasaki, M., Ishino, Y., Hoque, M. E., Mizuno, T. and Toumia, T. |
2004 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 214 |
A Feedback Control System for Suppressing Rotating Disk Flutter in Hard Disk Drives |
in Proceeding of the IEEE Asia Pacific Magnetic Recording Conference (APMRC), Singapore (invited paper), pp. AA5-01- AA5-02, 28-29 August, 2002 |
Huang, X. Y., Hoque, M. E., Wang, X. Z. and Yap, F. F. |
2002 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 215 |
An Active Technique for Controlling Disk Flutter in Hard Disk Drive |
in Proceedings of the 2nd World Engineering Congress, Sarawak, Malaysia, pp. 357-360, 22-25 July, 2002 |
Hoque, M. E., Huang, X. Y. and Yap, F. F. |
2002 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 216 |
Feedback Control of Rotating Disk Flutter: An Experimental Approach |
in Proceeding of the of 13th ASME Information Storage and Processing System Conference (ISPS), Santa Clara, California, USA, 17-18 June, 2002 |
Hoque, M. E., Huang, X. Y. and Yap, F. F. |
2002 |
Conference |
ME |
Dr. Md. Emdadul Hoque |
| 217 |
Intelligent Waste Sorting Bin for Recyclable Municipal Solid Waste |
International Conference on Automation, Control and Mechatronics for Industry 4.0 (ACMI), 8-9 July 2021, Rajshahi, Bangladesh (978-1-6654-3843-8/21/$31.00 © 2021 IEEE) |
M. Rokunuzzaman, S. R. Habib, A. K. Kowshik |
2021 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 218 |
Rover End Effector Design for Material Extraction from Earth like Planets |
Journal of Engineering and Applied Science, Vol. 4, No. 1, pp. 20–33, June 2020 |
Md. Rokunuzzaman, M. S. Ahmed, M. R. Islam |
2020 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 219 |
Development of a Segway like Two wheel self-balancing robot |
4th International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2019), 17-19 December, RUET, Rajshahi, Bangladesh |
Md. Rokunuzzaman, M. Sadikuzzaman, D. J. Barman |
2019 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 220 |
Design of suspension system for formula student race car |
ICMIME2019, 17-19 December, RUET, Rajshahi, Bangladesh |
S. M. Istiak, Md. Rokunuzzaman, M. A. Islam |
2019 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 221 |
Numerical analysis of airfoil arrangement for an active rear wing of formula student race car |
ICMIME2019, 17-19 December, RUET, Rajshahi, Bangladesh |
S. M. Istiak, N. Hasan, Md. Rokunuzzaman, S. Ghatak |
2019 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 222 |
Improved Differential Strobe Terminal Based Open-loop Control of Smart Power Factor Metering System |
1st international conference on Advances in Science, Engineering and Robotics Technology (ICASERT-2019), May 3-5, Dhaka, Bangladesh |
S. R. Fahim, S. S. Avro, S. K. Sarker, Md. Rokunuzzaman, S. K. Das |
2019 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 223 |
Development of A Pressure Sensing Module and Flow Control System For A Prototype Pump Test Bed |
Indonesian Journal of Electronics and Instrumentation Systems (IJEIS), 2018, 8(2), pp. 155-166 |
M. R. Nahian, M. S. Zaman, M. N.Islam, Md. Rokunuzzaman |
2018 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 224 |
Assessment of Surface Roughness Using LVDT: A Convenient and Inexpensive Way of Measuring Surface Irregularities |
ICMIME2017, 28-30 December, RUET, Rajshahi, Bangladesh |
S. Nasreen, Md. Rokunuzzaman, S. Biswas |
2017 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 225 |
Improvement of Driving Mechanism of Rickshaw |
ICMIME2017, 28-30 December, RUET, Rajshahi, Bangladesh |
N. Roy, N. K. Nath, Md. Rokunuzzaman, M. B. Alam |
2017 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 226 |
Continuous Rotation Control of Robotic Arm using Slip Rings for Mars Rover |
ICMIME2017, 28-30 December, RUET, Rajshahi, Bangladesh |
R. Islam, M. F. Islam, Md. Rokunuzzaman |
2017 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 227 |
Development of a Reconfigurable Robotic Gripper |
ICMEAS, 22-23 February, MIST, Dhaka, Bangladesh |
Md. Rokunuzzaman, R. Bhuiya, M. Z. I. Abir |
2017 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 228 |
Construction of Low Cost Linear Variable Differential Transformer and its Calibration |
Journal of Control System and Control Instrumentation, Vol. 1, Issue 1, pp. 1-6 |
A. Roy, Md. Rokunuzzaman, M. G. Rabbani, P. P. Roy |
2015 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 229 |
Development of an Intelligent Eye for Automatic Surveillance Based on Sound Recognition |
International Journal of Scientific Research and Management, 2015, 3(5): pp. 2910-2919 |
L. N. Nipa, Md. Rokunuzzaman, T. T. Moon |
2015 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 230 |
Electricity generation from windmill and its performance analysis |
Journal of Multidisciplinary Engineering Science and Technology (JMEST) , 2015, 2( 6): pp. 1394-1399 |
A. Roy, Md. Rokunuzzaman |
2015 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 231 |
Development of a Smoke Detection and Fire Extinguishing System |
Int. Arch. App. Sci. Technol, 6 (3): pp. 31-38 |
L. N. Nipa, Md. Rokunuzzaman |
2015 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 232 |
A Prototype Mobile Robot for Intelligent Energy Harvesting in Emergent Situation |
International Journal of Computer Applications, 123(1), pp. 21-28 |
L. N. Nipa, Md. Rokunuzzaman |
2015 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 233 |
Sound source recognition for intelligent surveillance |
ICMIME2015, 11-13 December, RUET, Rajshahi, Bangladesh |
Md. Rokunuzzaman, L. N. Nipa, T. T. Moon, S. Alam |
2015 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 234 |
Automatic Exploration of Object from Partial Region of Interest (ROI) |
ICMIME2015, 11-13 December, RUET, Rajshahi, Bangladesh |
1Md. Rokunuzzaman, S. Mandal, Md. Kamrul Islam and Basu Deb |
2015 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 235 |
Design and Construction of a Remote Controlled Fire Extinguishing Robot |
ICMIME2015, 11-13 December, RUET, Rajshahi, Bangladesh |
Md. Rokunuzzaman, M. S. Ahmed, M. Muhibullah, S. Sarker, M. K. Alam, M. S. Hossain |
2015 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 236 |
A Region of Interest (ROI) Sharing Protocol for Multi-Robot Cooperation with Distributed Sensing based on Semantic Stability |
IEEE Transactions on Systems, Man and Cybernetics: Systems, 44 (4) , pp. 457 – 467. (DOI: 10.1109/TSMC.2013.2259812) |
Md. Rokunuzzaman, T. Umeda, K. Sekiyama and T. Fukuda |
2014 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 237 |
Development of a low cost machine vision system for sorting of tomatoes |
Agric Eng Int: CIGR Journal, Vol. 15, No.1, pp.173-180 |
Md. Rokunuzzaman, H. P.W. Jayasuriya |
2013 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 238 |
Development of a Long Distance Controlled Surveillance Robot with GPS Tracking and Mapping |
ICMIEE , 01-02 February, Khulna, BANGLADESH |
13. S. M. HasaMd. Rokunuzzaman, M. M. J. Kabir, M. R. Islam, and M. R. Ahmed |
2013 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 239 |
Region of Interest Detection Based on Dynamic Interaction and Its Evaluation in Perspective of Cognitive Psychology |
International Journal of Advanced Research in Computer Science, 3(3): pp. 686-692 |
Md. Rokunuzzaman, M. Hasan, B. K. Das and M. A. Kader |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 240 |
Semantic Stability: A Missing Link between Cognition and Behavior |
International Journal of Advanced Research in Computer Science , 3(4): pp.78-83 |
11. Md. Rokunuzzaman, M. Hasan, A. U. Husna, B. K. Das and M. A. Kader |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 241 |
Design and Construction of a Simplified Walking Mechanism of Humanoid Robot |
International Journal of Advanced in Mechanical Engineering (IJAME) , 2(2): pp.157-163 |
Md. Rokunuzzaman, M. A. A. Habib and A.K.M.M. Rahman |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 242 |
Sound Effected Camera Control for the Development of Intelligent Systems |
International Journal of Advanced Mechatronics & Robotics (IJAMR), 4(2): pp.99-122 |
Md. Rokunuzzaman, M.I.H. Bhuiyan and M. Rasel, M. A. Munjer and M. A. Kader |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 243 |
Automated Identification of Various Defects in Tomatoes and It’s Sorting |
International Journal of Advanced Mechatronics & Robotics (IJAMR),4(2): pp.89-97 |
Md. Rokunuzzaman, M. Parnichkun and N. Afzulpurkar |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 244 |
Multi-robot Cooperation based on ROI Sharing for Distributed Cognition |
IJAAIES, 4(2): pp. 121-133 |
Md. Rokunuzzaman, M. A. Kader, M. Hasan and A. Roy |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 245 |
A Computer Vision Algorithm for Defect Detection and Sorting of Tomatoes |
International Journal of Advanced Manufacturing Systems, International Science Press: Vol 3, No.2, pp 129-138 |
Md. Rokunuzzaman, Nitin Afzulpurkar, Manukid Parnichkun |
2012 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 246 |
Multi-robot Cooperation based on Common Region of Interest Generation |
ICMIEE , 01-02 February, Khulna, BANGLADESH |
Md. Rokunuzzaman, A. Roy and M. A. Kader |
2012 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 247 |
A Generalized Method of Region of Interest Evaluation and Its application in Cognitive Sharing through Co-operative Action |
World Automation Congress, Mexico, USA |
K. Sekiyama, M. Rokunuzzaman and T. Fukuda |
2012 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 248 |
Multi-robot Cooperation based on Common Region of Interest Generation |
ICMIEE, MIE12-021, pp. 1-5, Khulna, Bangladesh |
Md. Rokunuzzaman, A. Roy and M. A. Kader |
2012 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 249 |
Intelligent Eye: Sound Based Event Detection and Camera Control |
ICECTE2012, Rajshahi, Bangladesh |
Md. Rokunuzzaman, Md. I. H. Bhuiyan, M. A. Munjer, M. M. Elahi, M.A. Kader |
2012 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 250 |
Development of a Surveillance Robot for Controlling from Unlimited Distance |
ICECTE2012, RUET, Bangladesh |
S. M. Hasan, M. Rokunuzzaman |
2012 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 251 |
Common Region of Interest Generation between Mobile Robots by Cognitive Ontology |
International Conference on Electrical and Computer Engineering (ICECE), Dhaka |
Md. Rokunuzzaman, K.Sekiyama and Toshio Fukuda |
2012 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 252 |
An Innovative Approach to Evaluate Semantic Context Awareness for ROI Selection |
Int. Journal of Innovative Computing, Information and Control (IJICIC), 7[5(B)]: pp. 2919-2929 |
Md. Rokunuzzaman, K. Watanabe, K. Sekiyama and T. Fukuda |
2011 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 253 |
Fabrication and performance study of a cost effective digital turbine flow meter |
ICMERE, Chittagong , Bangladesh |
S. M. Hasan, Md. Rokunuzzaman, M. N. Islam, M. S. A. Khan, M. A. Saleq, A.A.R. Newaz |
2011 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 254 |
An Experimental Investigation on Single axis Sun Tracker by Wiper Motor |
International Conference on Mechanical Engineering (ICME), Dhaka |
M. R. Pervez, Md. Rokunuzzaman, M. R. Beg and M. Solaiman |
2011 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 255 |
Automatic ROI Detection and Evaluation in Video Sequences Based on Human Interest |
Journal of Robotics and Mechatronics, 22(1): pp. 65-75 |
M. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2010 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 256 |
Semantic Evaluation of Region of Interest for Intelligent Robot |
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Taiwan, October, pp. 3519-3524 |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2010 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 257 |
Multiple Region of Interest Evaluation for Ubiquitous Robots |
7th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), Korea, October, pp. 429-432 |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2010 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 258 |
Cognitive Boundary Detection using Semantic Stability Concept |
Joint 5th International Conference on Soft Computing and Intelligent Systems and 11th International Symposium on Advanced Intelligent Systems(SCIS/ISIS), Japan, December |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2010 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 259 |
Real Time Detection and Evaluation of Region of Interest by Mobile Robot using Vision |
18th IEEE Int. Symposium on Robot and Human Interactive Communication, pp. 1149-1154 |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2009 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 260 |
Real Time Evaluation of ROI based on Visual Awareness |
19th Intelligent System Symposium and 1st International Workshop on Aware Computing, pp. 608-613 |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2009 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 261 |
A New Decision Making Criteria of ROI Evaluation in Video Sequences and Comparison with Human Evaluation Psychology |
IEEE International Symposium of Micro-Nano Mechatronics and Human Science, pp. 592-597 |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2009 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 262 |
Region Of Interest Detection and Evaluation by Mobile Robot with Moving Background Model |
JSME Conference on Robotics and Mechatronics , pp. 2A-F10(1-4) |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2009 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 263 |
Sharing Region of Interest for Common Concern between Autonomous Agents with Different Modalities Using Ontological Recognition |
Robotics Society of Japan, pp. 58-61 |
Md. Rokunuzzaman, K. Sekiyama and T. Fukuda |
2008 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 264 |
Mobile Robotic Sensor Network Using Vision Tracking |
IEEE/SICE International Symposium on System Integration, page 19 |
J. Takahashi, Md. Rokunuzzaman, K. Sekiyama, T. Fukuda |
2008 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 265 |
A New Control Approach for Machine Vision System |
Journal of Engineering and Technology, 5(2): pp. 31-42 |
Md. Rokunuzzaman, M. W. Islam, M. Parnichkun |
2006 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 266 |
A Stand Alone Single Axis Offline PV Tracker Using Low Cost CMOS Circuitry |
3rd BSME-ASME International Conference on Thermal Engineering, Dhaka |
Md. Rokunuzzaman, M. W. Islam, M. M. Hossain |
2006 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 267 |
Automatic Control of Room Temperature for Human Comfort |
11th Annual Paper Meet, Dhaka, pp. 170-175 |
M. W. Islam, Md. Rokunuzzaman, M. Asaduzzaman, M. A. Raihan |
2006 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 268 |
Design of a Software Controlled Two axis Automatic Solar tracking system |
Mech. Eng. Res. Journal (ISSN 1990-5491), 5: pp. 48-53 |
M.R.I. Sarker, M.R.A. Beg, M. R. Zaman, M.T. Islam and M.Z. Hossain |
2005 |
Journal |
ME |
Dr. Md. Rokunuzzaman |
| 269 |
Automatic Controlled Defect Sorter for Tomatoes based on Machine Vision |
4th Asian Conference on Industrial Automation and Robotics (Sponsored by IEEE, CMP, AIT, Robotics & Automation Society and TRS), pp. 65-68 |
Md. Rokunuzzaman, S. Akhter, N. V. Afzulpurkar |
2005 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 270 |
Development of an Integrated Logic Circuitry for Controlling The Solar PV Panel for Automatic Tracking system |
3rd Int. Conf. of Mechanical Engineering and 8th Annual Paper Meet on E-manufacturing, Dhaka, page 12 Section-III |
Md. Rokunuzzaman, S.K. Choudhury and M. S. Akhter |
2003 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 271 |
Design of Digital Display of Speed and Temperature of an Engine by Micro-Controller Logic Circuit and Op-Amps |
3rd Int. Conf. of Mechanical Engineering and 8th Annual Paper Meet on E-manufacturing, Dhaka, page 57 Section-III |
Md. Rokunuzzaman, M.R.A Beg |
2003 |
Conference |
ME |
Dr. Md. Rokunuzzaman |
| 272 |
Engineering Pt/Co/AlOxheterostructures to enhance the Dzyaloshinskii-Moria interaction |
Journal of Physics: Condensed Matter |
Babu Ram Sankhi, Elena Echeverria, Soumya Mandal, Muhammet Annaorazov, Ritesh Sachan, Dave N McIlroy, Derek Meyers, Emrah Turgut |
2023 |
Journal |
ME |
Soumya Mandal |
| 273 |
Understanding non-stochiometric deposition of multi-principal elemental NiCoCr thin films |
Applied Surface Science |
Soumya Mandal, Ashish Kumar Gupta, Volker Rose, Sarah Wieghold, Nozomi Shirato, Ritesh Sachan |
2023 |
Journal |
ME |
Soumya Mandal |
| 274 |
Interface and Surface Effects on Domain Wall Depinning Fields |
Bulletin of the American Physical Society |
Babu Sankhi, Ujjal Lamichhane, Soumya Mandal, Ritesh Sachan, Emrah Turgut, Derek Meyers |
2023 |
Journal |
ME |
Soumya Mandal |
| 275 |
Laser Irradiation-Induced Nanoscale Surface Transformations in Strontium Titanate |
Crystals |
Ashish Kumar Gupta, Siddharth Gupta, Soumya Mandal, Ritesh Sachan |
2022 |
Journal |
ME |
Soumya Mandal |
| 276 |
Manipulation of Dyzaloshinskii-Moria interaction in Pt/Co/AlOx heterostructure |
American Physical Society |
Babu Sankhi, Elena Echeverria, Hans Nembach, Soumya Mandal, Ritesh Sachan, David McIlroy, Emrah Turgut, Derek Meyers |
2022 |
Journal |
ME |
Soumya Mandal |
| 277 |
Interface Effects on Magnetic Anisotropy and Domain Wall Depinning Fields in Pt/Co/AlOx Thin Films |
Magnetochemistry |
Ram Sankhi Babu, Ujjal Lamichhane, Soumya Mandal, Ritesh Sachan, Emrah Turgut, Derek Meyers |
2022 |
Journal |
ME |
Soumya Mandal |
| 278 |
Engineering of Heterostructure Pt/Co/AlOx for the enhancement of Dyzaloshinskii-Moria interaction |
arXiv |
Babu Ram Sankhi, Elena Echeverria, Hans T Nembach, Justin M Shaw, Soumya Mandal, Muhammet Annaorazov, Ritesh Sachan, David N Mcllroy, D Meyers, Emrah Turgut |
2022 |
Journal |
ME |
Soumya Mandal |
| 279 |
Laser-assisted nanofabrication of multielement complex oxide core–shell nanoparticles |
Materials & Design |
Soumya Mandal, Ashish Kumar Gupta, Elena Echeverria, David N McIlroy, Jonathan D Poplawsky, Ritesh Sachan |
2022 |
Journal |
ME |
Soumya Mandal |
| 280 |
Hybrid data-driven feature extraction-enabled surface modeling for metal additive manufacturing |
The International Journal of Advanced Manufacturing Technology |
Zhangyue Shi, Soumya Mandal, Sandip Harimkar, Chenang Liu |
2022 |
Journal |
ME |
Soumya Mandal |
| 281 |
Surface Morphology Analysis Using Convolutional Autoencoder in Additive Manufacturing with Laser Engineered Net Shaping |
Procedia Manufacturing |
Zhangyue Shi, Soumya Mandal, Sandip Harimkar, Chenang Liu |
2021 |
Journal |
ME |
Soumya Mandal |
| 282 |
Atomic-Scale Insights on Large-Misfit Heterointerfaces in LSMO/MgO/c-Al2O3 |
Crystals |
Soumya Mandal, Ashish Kumar Gupta, Braxton Hays Beavers, Vidit Singh, Jagdish Narayan, Ritesh Sachan |
2021 |
Journal |
ME |
Soumya Mandal |
| 283 |
A Study on Aerosol Spray Characteristics of Different Size Atomizers |
Aerosol Science and Engineering |
MRI Sarker, Md Sazan Rahman, Soumya Mandal, MM Rony |
2020 |
Journal |
ME |
Soumya Mandal |
| 284 |
ADVANCES IN HEA-BASED AM COMPONENETS:ROLE OF HIGH-RESOLUTION MICROSCOPY |
Advanced Materials and Processes |
Soumya Mandal, Ritesh Sachan, Amit Pandey |
2020 |
Journal |
ME |
Soumya Mandal |
| 285 |
Experimental investigation of the performance of a double pass solar water heater with reflector |
Renewable energy |
Soumya Mandal, Subir Kumar Ghosh |
2020 |
Journal |
ME |
Soumya Mandal |
| 286 |
Experimental and Numerical Analysis of a Stand-Alone PV/T System to Improve its Efficiency |
J Fundam Renewable Energy Appl |
MS Rahman, MRI Sarker, S Mandal, MRA Beg |
2018 |
Journal |
ME |
Soumya Mandal |
| 287 |
Evaluation of Biogas as an Alternative Driving Force of Electrically Operated Vehicles: A Case Study |
International Journal of Engineering-Transactions B: Applications |
S Kumar Ghosh, S Mandal |
2018 |
Journal |
ME |
Soumya Mandal |
| 288 |
Proposal of a solar storage system for plant-based food materials in Bangladesh |
International Journal of Ambient Energy |
Mohammad UH Joardder, Soumya Mandal, MH Masud |
2018 |
Journal |
ME |
Soumya Mandal |
| 289 |
Numerical study on the influence of vortex flow and recirculating flow into a solid particle solar receiver |
Renewable energy |
MRI Sarker, Soumya Mandal, Sumaiya Sadika Tuly |
2018 |
Journal |
ME |
Soumya Mandal |
| 290 |
Optimum sizing of a stand-alone hybrid energy system for rural electrification in Bangladesh |
Journal of Cleaner Production |
Soumya Mandal, Barun K Das, Najmul Hoque |
2018 |
Journal |
ME |
Soumya Mandal |
| 291 |
Numerical study of a downdraft gasifier to produce syngas |
AIP Conference Proceedings |
Soumya Mandal, MRI Sarker, Md Sazan Rahman, MRA Beg |
2017 |
Conference |
ME |
Soumya Mandal |
| 292 |
Prospect of rural electrification through biogas in Bangladesh-design & feasibility study of biogas based electricity facility of a poultry farm |
International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), RUET |
Md Nurul Islam, SM Najmul Hoque, Soumya Mandal, Abir Hasan, Md Rafsan Nahian |
2017 |
Conference |
ME |
Soumya Mandal |
| 293 |
An Analysis of Braking Energy Regeneration in Electric Vehicles |
International Journal of Renewable Energy Research (IJRER) |
Soumya Mandal, MRI Sarker, MS Rahman, MRA Beg |
2017 |
Journal |
ME |
Soumya Mandal |
| 294 |
Prospect of solar-PV/biogas/diesel generator hybrid energy system of an off-grid area in Bangladesh |
AIP Conference Proceedings |
Soumya Mandal, Hosna Yasmin, MRI Sarker, MRA Beg |
2017 |
Conference |
ME |
Soumya Mandal |
| 295 |
A techno-economic feasibility of a stand-alone hybrid power generation for remote area application in Bangladesh |
Barun K Das, Najmul Hoque, Soumya Mandal, Tapas Kumar Pal, Md Abu Raihan |
Barun K Das, Najmul Hoque, Soumya Mandal, Tapas Kumar Pal, Md Abu Raihan |
2017 |
Journal |
ME |
Soumya Mandal |
| 296 |
Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh |
ICPE |
Md Fajle Rabbi Md Shazib Uddin, Amit Roy, S Mandal |
2016 |
Conference |
ME |
Soumya Mandal |
| 297 |
Assessment of Energy Consumption and Emissions of Jute Mill Production Line in Bangladesh |
ICPE |
Md Shazib Uddina, Mahadi Hasan Masud, Soumya Mandal |
2016 |
Conference |
ME |
Soumya Mandal |
| 298 |
Impact of battery driven vehicle on the electricity of Rajshahi city, Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME 2015) |
Soumya Mandal, Sabbir Ahmed, Fazle Rabbi |
2015 |
Conference |
ME |
Soumya Mandal |
| 299 |
Construction and Performance Study of Underground Assisted Air Heating and Cooling System |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2015) |
Md Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal, Monjur Morshed |
2015 |
Conference |
ME |
Soumya Mandal |
| 300 |
Design, Construction and Performance Test of a Solar Powered Prototype Vehicle |
International Conference on Mechanical, Industrial and Materials Engineering |
Md Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud, Monjur Mourshed |
2015 |
Conference |
ME |
Soumya Mandal |
| 301 |
Effect of Heat Treatment on Crack Initiation & Propagation of Stainless Steel (Ss-304) |
Global Journal of Research In Engineering |
Soumya Mandal, Tonmoy Karmaker, Md Nurul Islam |
2014 |
Journal |
ME |
Soumya Mandal |
| 302 |
Modeling and performance investigation of novel inorganic Cs4CuSb2Cl12 nanocrystal perovskite solar cell using SCAPS-1D |
Results in Engineering |
Hironmoy Karmaker, Ayesha Siddique, Barun K. Das, Md Nurul Islam |
2024 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 303 |
Numerical simulation and performance optimization of a lead-free inorganic perovskite solar cell using SCAPS-1D |
Heliyon |
Sujan Banik , Arnob Das * , Barun K. Das, Nurul Islam |
2024 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 304 |
Effect of TiO2 as sintering additive on microstructural, physical, and mechanical properties of CeO2 doped zirconia toughened alumina ceramic composite |
Ceramics International |
Md. Bakhtierkhalzi, Md. Wahedul Islam, Md. Suzauddin, Md. Nurul Islam, Abdullah Al Mahmood |
2023 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 305 |
Performance evaluation of inorganic perovskite solar cell through numerical simulation |
ICMERE |
Ayesha Siddiquea, Hironmoy Karmakera, Md. Nurul Islam |
2023 |
Conference |
ME |
Dr. Md. Nurul Islam |
| 306 |
Development of a Low-Cost Compression Device for Ceramics Materials |
ICMIMEE22 |
Md. Mostafa Kamal, Mir Imran Bin Samad, Md. Nurul Islam |
2022 |
Conference |
ME |
Dr. Md. Nurul Islam |
| 307 |
Observation of Crack Initiation, Propagation and Effect of Heat Treatment on Stainless Steel 316 (SS 316) |
ICMIME |
Md. Nurul Islam, Md. Tamzid Ahmed, Md. Ansarul Haque, Abdul Mojid Parvej |
2022 |
Conference |
ME |
Dr. Md. Nurul Islam |
| 308 |
Property analysis of sintered porous aluminum oxide |
AIP Conference Proceedings |
Md. Abdulla Al Mamun, Sakib Muhammad Mohtasim, and M. N. Islam |
2021 |
Conference |
ME |
Dr. Md. Nurul Islam |
| 309 |
Structural modification and evaluation of dielectric and ferromagnetic properties of Ce-modified BiFeO3–BaTiO3 ceramics |
Ceramics International Volume 46, Issue 10, Part B, pp. 15840-15850 |
Mst. SharminMostari, Nurul Islam, Md. Abdul Matin |
2020 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 310 |
Towards the Optimization of Process Parameters for Impact Strength of Natural Fiber Reinforced Composites: Taguchi Method |
Advances in Materials Science, Vol. 20, No. 2(64) |
S. S. Yusuf , M. N. Islam , M. H. Ali , M. W. Akram, M. A. Siddique |
2020 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 311 |
Synthesis and Characterization of Ce Incorporated BiFeO3-BaTiO3 Ceramic near the Morphotropic Phase Boundary |
SSRG International Journal of Material Science and Engineering ( SSRG-IJMSE ) - Volume 5 Issue 2, ISSN: 2394 - 8884 |
Mst. Sharmin Mostari1 , Md. Nurul Islam |
2019 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 312 |
Optimum Process Parameters Selection for Brinell Hardness Number of Natural Fiber Reinforced Composites Using Taguchi Method |
Saudi Journal of Engineering and Technology (SJEAT), 4(10): pp. 422-427 |
Sk. Suzauddin Yusuf, Md. Nurul Islam, Md. Hasan Ali, Md. Washim Akram, Md. Abubakar Siddique |
2019 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 313 |
Mechanical properties of ferroelastic La0.6Sr0.4Co0.2Fe0.8O3−δ with various porosities and pore sizes |
Journal of Materials Science, volume 54, pp. 5256–5265 |
M. N. Islam, W. Araki and Y. Arai |
2019 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 314 |
Investigation of ferroelastic mechanical behavior of lanthanum ferrite, LaFeO3 |
AIP Publishing, 2121, 140005 |
Md. Nurul Islam, Wakako Araki, Yoshio Arai |
2019 |
Conference |
ME |
Dr. Md. Nurul Islam |
| 315 |
Ferroelastic Mechanical Behavior Of Porous La0.6Sr0.4Co0.2Fe0.8o3−δ Prepared Using Corn Starch As A Pore Former |
International Journal of Mechanical And Production Engineering, ISSN(p): 2320-2092, ISSN(e): 2321-2071 Volume- 6, Issue-1 |
M. N. Islam, W. Araki and Y. Arai |
2018 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 316 |
Mechanical behavior of ferroelastic LaAlO3 |
Journal of the European Ceramic Society” Vol. 37, pp. 1665-1671 |
M. N. Islam, W. Araki and Y. Arai |
2017 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 317 |
Mechanical behavior of ferroelastic porous La0.6Sr0.4Co0.2Fe0.8O3−δ prepared with different pore formers |
Ceramic International, Vol. 43, pp. 14989-14995 |
M. N. Islam, W. Araki and Y. Arai |
2017 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 318 |
Use of ultrasonic back-refection intensity for predicting the onset of crack growth due to low-cycle fatigue in stainless steel under block loading |
Ultrasonics, Vol. 56, pp. 354-360 |
Islam M.N., Arai. Y and Araki W |
2015 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 319 |
Oil Extraction from Pine Seed (Polyalthia longifolia) by Solvent Extraction Method and its Property Analysis |
Procedia Engineering 105 , pp. 613 – 618 |
M.N.Islam, A. Saburb, R. Ahmmed, M. E. Hoque |
2015 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 320 |
Effect of Heat Treatment on Crack Initiation & Propagation of Stainless Steel (SS-304) |
Global Journal of Researches in Engineering, Mechanical and Mechanics Engineering, Volume 14 Issue 1 Version 1.0 |
Soumya Mandal, Tonmoy Karmaker & Dr. Md. Nurul Islam |
2014 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 321 |
Evaluation of Start of Crack Growth of Nuclear Material (SUS316NG) using Ultrasonic |
Procedia Engineering, Vol. 56, pp. 707-712 |
Islam M.N., Arai. Y and Araki W |
2013 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 322 |
Initiation of Fatigue Crack Growth in Austenitic Stainless Steel Detected by Ultrasound: Role of In-plane Orientation |
Material Science and Engineering, A Vol. 556 pp. 309-318 |
Islam M.N., Arai. Y, Araki. W |
2012 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 323 |
Effect of plastic strain range on prediction of the onset of crack growth for low cycle fatigue of SUS316NG studied using ultrasonic back reflection |
Journal of Solid Mechanics and Materials Engineering, Vol. 4, No. 3 |
Islam M.N., Arai. Y and Araki W |
2010 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 324 |
Ultrasonic back reflection evaluation of crack growth from PSBs in low cycle fatigue of stainless steel under constant load amplitude |
Material Science and Engineering, A Vol. 520 pp. 49-55 |
Islam M.N., Arai. Y |
2009 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 325 |
Pyrolytic oil from fixed bed pyrolysis of municipal solid waste and its characterization. |
Renewable energy, Vol. 30 pp 413 |
Islam M.N., Islam M.N. and Beg, R.A |
2005 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 326 |
Fixed bed pyrolysis of waste plastic for alternative fuel production |
Journal of Energy & Environment, Vol 3, pp 69. |
Islam M.N., Islam M.N. and Beg, R.A |
2004 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 327 |
The fuel properties of pyrolysis liquid derived from urban solid waste in Bangladesh |
Bio-resource Technology, Vol 92, pp 181 |
Islam M.N., Islam M.N. and Beg, R.A |
2004 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 328 |
Fixed bed pyrolysis of scrap tire for liquid fuel production |
International Energy Journal, Vol.5 No. 1 |
Islam M.N., Islam M.N. and Beg, R.A |
2004 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 329 |
Alternative liquid fuel by pyrolysis technology from available biomass solid wastes in Bangladesh |
Journal of Mechanical Engineering, IEB, Vol 32. |
Islam M.R., Islam M.N |
2003 |
Journal |
ME |
Dr. Md. Nurul Islam |
| 330 |
Experimental investigation of a novel evaporative cooling pad made of cement-free porous concrete |
Building and Environment |
Md SazanRahman, Sarah MacPherson, Mark Lefsrud |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 331 |
Experimental investigation of heat and moisture transfer with ventilation through porous concrete with embedded coils for air conditioning |
Building and Environment |
Md Sazan Rahman, Tristan Chauvin-Bosséa, Abdolhamid Akbarzadeh, Alexandre Guerini, Julien Chapelat, Mark Lefsrud |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 332 |
A study on heat and mass transfer through vegetated porous concrete for environmental control |
Journal of Cleaner Production |
Md Sazan Rahman, Sarah MacPherson, Abdolhamid Akbarzadeh, Alexandre Guerini, Julien Chapelat, Mark Lefsrud |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 333 |
Prospects of porous concrete as a plant-growing medium and structural component for green roofs: a review |
Renewable Agriculture and Food Systems |
Md Sazan Rahman, Sarah MacPherson, Mark Lefsrud |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 334 |
Thermal performance analysis of a solar still with different absorber plates and external copper condenser |
Groundwater for Sustainable Development |
Lailatul Nehar, Tanvir Rahman, S.S. Tuly, Md Sazan Rahman, M.R.I. Sarker, M.R.A. Beg |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 335 |
System and method for circulating air. |
US Patent Office |
Mark LEFSRUD, Sazan RAHMAN, Tristan CHAUVIN-BOSSE |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 336 |
Green buildings can boost productivity, well-being and health of workers |
The Conversation |
Md Sazan Rahman |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 337 |
Sensitivity Analysis of the DehumReq Model to Evaluate the Impact of Predominant Factors on Dehumidification Requirement of Greenhouses in Cold Regions |
Information Processing in Agriculture |
Md Sazan Rahman, Huiqing Guo |
2022 |
Journal |
ME |
Md. Sazan Rahman |
| 338 |
Design, Development and Performance testing of a novel porous concrete energy exchanger for agricultural buildings |
International Horticultural Congress |
Md Sazan Rahman, J Trudel-Baris, Sarah MacPherson, Mark Lefsrud |
2022 |
Conference |
ME |
Md. Sazan Rahman |
| 339 |
Analysis of chemical, morphological, energy efficiency, and fuel properties of bamboo torrefaction |
Biofuels |
Sumaiya Sadika Tuly, Oishwarjya Ferdous, S.M. Abu Bakar Siddik, Md Azmain Ekhtader, Md Sazan Rahman, Md Rabiul Islam Sarker |
2021 |
Journal |
ME |
Md. Sazan Rahman |
| 340 |
Temperature Control Through Concrete to be used as a Green Building’s Element |
Northeast Agricultural and Biological Engineering Conference |
MS Rahman, T Chauvin-Bosse, S Macpherson, M Lefsrud |
2021 |
Conference |
ME |
Md. Sazan Rahman |
| 341 |
Dehumidification requirement modelling and control strategy for greenhouses in cold regions |
Computers and Electronics in Agriculture |
Md Sazan Rahman, Huiqing Guo, Jingjing Han |
2021 |
Journal |
ME |
Md. Sazan Rahman |
| 342 |
Effects of Design and Operational Parameters on the Performance of a Solar Distillation System: A Comprehensive Review |
Groundwater for Sustainable Development |
S.S. Tuly, M.R.I. Sarker, Barun K. Das, M.S. Rahman |
2021 |
Journal |
ME |
Md. Sazan Rahman |
| 343 |
Combined influence of fin, phase change material, wick, and external condenser on the thermal performance of a double slope solar still |
Journal of Cleaner Production |
S.S. Tuly, M.S. Rahman, M.R.I. Sarker, R.A. Beg |
2020 |
Journal |
ME |
Md. Sazan Rahman |
| 344 |
A Study on Aerosol Spray Characteristics of Different Size Atomizers |
Aerosol Science and Engineering |
MRI Sarker, MS Rahman, S Mandal, MM Rony |
2020 |
Journal |
ME |
Md. Sazan Rahman |
| 345 |
Dehumidification Load Prediction and Evaluation of Dehumidifying Methods for Greenhouses in Cold Regions |
Thesis: University of Saskatchewan |
Md Sazan Rahman |
2019 |
Book |
ME |
Md. Sazan Rahman |
| 346 |
Experimental and Numerical Analysis of a Stand-Alone PV/T System to Improve its Efficiency |
Scholar Journal of Applied Sciences and Research |
MS Rahman, MRI Sarker, S Mandal, MRA Beg |
2018 |
Journal |
ME |
Md. Sazan Rahman |
| 347 |
Experimental investigation of spray characteristics of a poly-disperse atomizer using different composition of ethanol |
International Conference on Engineering Research, Innovation and Education 2017 ICERIE 2017 |
MM Rony, MS Rahman, MS Akhter, NN Mustafi, MRI Sarker |
2017 |
Conference |
ME |
Md. Sazan Rahman |
| 348 |
An Analysis of Braking Energy Regeneration in Electric Vehicles |
International Journal of Renewable Energy Research (IJRER) |
Soumya Mandal, MRI Sarker, MS Rahman, MRA Beg |
2017 |
Journal |
ME |
Md. Sazan Rahman |
| 349 |
Pyrolysis kinetics study of three biomass solid wastes for thermochemical conversion into liquid fuels |
AIP Conference Proceedings |
SS Tuly, M Parveen, MR Islam, MS Rahman, H Haniu |
2017 |
Conference |
ME |
Md. Sazan Rahman |
| 350 |
Numerical study of a downdraft gasifier to produce syngas |
AIP Conference Proceedings |
Soumya Mandal, MRI Sarker, Md Sazan Rahman, MRA Beg |
2017 |
Conference |
ME |
Md. Sazan Rahman |
| 351 |
Upgrading of waste tyre pyrolysis oil to be used in diesel engine |
Mechanical Engineering Research Journal |
A Khaleque, MR Islam, MS Hossain, Mala Khan, MS Rahman, H Haniu |
2017 |
Journal |
ME |
Md. Sazan Rahman |
| 352 |
Biofuel from co-pyrolysis of solid tire waste and rice husk |
Energy Procedia |
M S Hossain, M R Islam, M S Rahman, M A Kader, H Haniu |
2017 |
Journal |
ME |
Md. Sazan Rahman |
| 353 |
Biofuel from Co-pyrolysis of Solid Polythene Waste and Saw dust |
International Conference on Mechanical, Industrial and Energy Engineering 2016 |
MS Hossain, MS Rahman, MR Islam, H HANIU |
2016 |
Conference |
ME |
Md. Sazan Rahman |
| 354 |
Maximum Utilization of Solar Radiation in a Solar Air Heater Combined with Solar Cells by Concave Lens |
International conference on Mechanical, Industrial and materials Engineering, ICMIME-2015 |
Sazan Rahman, Saiful Islam, Najmul Hoque, Mohd Rafiqul Alam Beg |
2015 |
Conference |
ME |
Md. Sazan Rahman |
| 355 |
Prospects of Bagasse Gasification Technology for Electricity Generation in Sugar Industries in Bangladesh |
International conference on Mechanical, Industrial and materials Engineering, ICMIME-2013 |
Barun Kumar Das, S.M. Najmul Haque, M.A. Kader and Md. Sazan Rahman |
2013 |
Conference |
ME |
Md. Sazan Rahman |
| 356 |
Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management |
Springer Nature Switzerland AG |
Md. Golam Kibria, Nahid Imtiaz Masuk, Rafat Safayet, Huy Quoc Nguyen, Monjur Mourshed |
2023 |
Journal |
ME |
Dr. Monjur Mourshed |
| 357 |
Using Electrical Conductivity to Determine Particle Sedimentation Status of Carbon-Based Slurry Electrodes in Electrochemical Energy Storage Systems |
Elsevier |
Monjur Mourshed, Huy Nguyen , Bahman Shabani |
2023 |
Journal |
ME |
Dr. Monjur Mourshed |
| 358 |
Electronical Conductivity Improvement of Carbon-Based Slurry Electrodes Using Carbon Foams for Enhanced Performance in Advanced Electrochemical Energy Storage Systems |
American Chemical Society |
Monjur Mourshed, Seyed M. R. Niya, Bahman Shabani |
2023 |
Journal |
ME |
Dr. Monjur Mourshed |
| 359 |
Experimental Study of Electronic and Ionic Conductivity of a Carbon-Based Slurry Electrode Used in Advanced Electrochemical Energy Systems |
American Chemical Society |
Monjur Mourshed, Seyed M. R. Niya, Bahman Shabani |
2022 |
Journal |
ME |
Dr. Monjur Mourshed |
| 360 |
An Experimental Approach to Energy and Exergy Analyses of a Hybrid PV/T System with Simultaneous Water and Air Cooling |
Energies |
Monjur Mourshed, Nahid Imtiaz Masuk, Huy Quoc Nguyen, Bahman Shabani |
2022 |
Journal |
ME |
Dr. Monjur Mourshed |
| 361 |
An experimental study of employing organic phase change material for thermal management of metal hydride hydrogen storage |
Elsevier |
Huy Quoc Nguyen, Monjur Mourshed, Biddyut Paul, Bahman Shabani |
2022 |
Journal |
ME |
Dr. Monjur Mourshed |
| 362 |
Generation of waste: problem to possible solution in developing and underdeveloped nations |
In book: Waste Management and Resource Recycling in the Developing WorldPublisher: Elsevier |
Mahadi Hasan Masud, Monjur Mourshed, Md. Sanowar Hossain, Nufile Uddin Ahmed, Peter Dabnichki |
2022 |
Book Chapter |
ME |
Dr. Monjur Mourshed |
| 363 |
Current scenario and challenges of plastic pollution in Bangladesh: a focus on farmlands and terrestrial ecosystems |
Springer Nature Switzerland AG |
Md. Raihanul Islam, Sumaiya Akter Ruponti, Md. Abdur Rakib, Huy Quoc Nguyen , Monjur Mourshed |
2022 |
Journal |
ME |
Dr. Monjur Mourshed |
| 364 |
PERFORMANCE EVALUATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM (VARS) OPERATING WITH SOLAR ASSISTED ORGANIC RANKINE CYCLE (ORC) |
Conference: International Conference on Mechanical Engineering and Renewable EnergyAt: (ICMERE 2021) 12 – 14 December 2021,Chattogram, Bangladesh |
A.M. Parvej, Sumaiya Sadika Tuly, M.H. Mitul, A. Elahe, Monjur Mourshed, M R I Sarker |
2021 |
Conference |
ME |
Dr. Monjur Mourshed |
| 365 |
Global Electronic Waste Management |
In book: Paradigm Shift in E-waste Management, CRC Press |
Mahadi Hasan Masud, Monjur Mourshed, Mosarrat Mahjabeen, Anan Ashrabi Ananno, Peter Dabnichki |
2021 |
Book Chapter |
ME |
Dr. Monjur Mourshed |
| 366 |
Carbon-based slurry electrodes for energy storage and power supply systems |
Elsevier |
Monjur Mourshed, Seyed Mohammad Rezaei Niya, Ruchika Ojha, Gary Rosengarten, John Andrewsa and Bahman Shabani |
2021 |
Journal |
ME |
Dr. Monjur Mourshed |
| 367 |
Design and experimental investigation of an internal mixing twin-fluid atomizer for the generation of test aerosol particles |
Australian Journal of Mechanical Engineering |
Amit Arefin, Anan Ashrabi Ananno, Mahadi Masud, Md. Mostafijur Rahman, Monjur Mourshed, Kamrun Nahar, Md. Shamim Akhter |
2020 |
Journal |
ME |
Dr. Monjur Mourshed |
| 368 |
Experimental investigation of cotton ( Gossypium hirsutum ) seed oil and neem ( Azadirachta indica ) seed oil methyl esters as biodiesel on DI (Direct Injection) engine |
Taylor & Francis |
M. Mourshed, Subir Kumar Ghosh and Md. Wahedul Islam |
2020 |
Journal |
ME |
Dr. Monjur Mourshed |
| 369 |
Experimental investigation and CFD analysis of a solar hybrid PV/T system for the sustainable development of the rural northern part of Bangladesh |
Taylor & Francis |
M. Mourshed, Subir Kumar Ghosh, Tariqul Islam and Nirendra Nath Mustafi |
2019 |
Journal |
ME |
Dr. Monjur Mourshed |
| 370 |
Towards the effective E-waste management in Bangladesh: a review |
Springer Nature Switzerland AG |
Mahadi Hasan Masud, Wasim Akram, Asif Ahmed, Anan Ashrabi Ananno, M. Mourshed, Muntakhimoon Hasan and Mohammad Uzzal Hossain Joardder |
2019 |
Journal |
ME |
Dr. Monjur Mourshed |
| 371 |
A comparative numerical analysis of heat generation pattern for different materials at varying cutting speed |
AIP Conference Proceedings |
Md. Tariqul Islam, Md. Towhidul Islam, Sami Ahbab Chowdhury, M. Mourshed, and M. H. Masud |
2019 |
Conference |
ME |
Dr. Monjur Mourshed |
| 372 |
State of Bound Water: Measurement and Significance in Food Processing |
Springer Nature Switzerland AG |
Mohammad U.H. Joardder, M. Mourshed and Mahadi Hasan Masud |
2019 |
Book |
ME |
Dr. Monjur Mourshed |
| 373 |
Performance enhancement of solar PV/T by using glycerin as additive |
AIP Conference Proceedings |
Subir Kumar Ghosh, M. Mourshed, P. C. Karmaker, A. Ahmed and M. H. Masud |
2019 |
Conference |
ME |
Dr. Monjur Mourshed |
| 374 |
Prospects of non-edible neem (Azadirachta indica) oil in Bangladesh: performance and emission evaluation in a direct injection diesel engine |
Taylor & Francis |
Md. Wahedul Islam, M. Mourshed, M. H. Masud, Shariful Islam Sozal and Sifat Bin Sabur |
2018 |
Journal |
ME |
Dr. Monjur Mourshed |
| 375 |
Inhalation risk of indoor aerosol spray products commercially available in Bangladesh |
Taylor & Francis |
M. H. Masud, M. Mourshed, Amit Md. Estiaque Arefin, Md. Tariqul Islam and Md. Shamim Akhter |
2018 |
Journal |
ME |
Dr. Monjur Mourshed |
| 376 |
Numerical investigation of the stress development in the involute spur gear under static load condition |
AIP Conference Proceedings |
M. Mourshed, M. H. Masud and Md. Tariqul Islam |
2018 |
Conference |
ME |
Dr. Monjur Mourshed |
| 377 |
The effect of Reynolds number on the performance of a modified NACA 2412 airfoil |
AIP Conference Proceedings |
Md. Tariqul Islam, Amit M. E. Arefin, M. H. Masud and M. Mourshed |
2018 |
Conference |
ME |
Dr. Monjur Mourshed |
| 378 |
Biogas Quality Enhancement by Applying Additives |
Water and Energy International |
M. Mourshed and N.N. Mustafi |
2018 |
Journal |
ME |
Dr. Monjur Mourshed |
| 379 |
Development and performance test of a low-cost hybrid solar air heater |
Taylor & Francis |
M. H. Masud, Raju Ahamed, M. Mourshed, M. Y. Hossan & M. A. Hossain |
2017 |
Journal |
ME |
Dr. Monjur Mourshed |
| 380 |
Towards the effective plastic waste management in Bangladesh: a review |
Springer Nature Switzerland AG |
M. Mourshed, Mahadi Hasan Masud, Fazlur Rashid and Mohammad Uzzal Hossain Joardder |
2017 |
Journal |
ME |
Dr. Monjur Mourshed |
| 381 |
Feasibility test on green energy harvesting from physical exercise devices |
AIP Conference Proceedings |
Nirendra N. Mustafi, M. Mourshed, M. H. Masud, M. S. Hossain and M. R. Kamal |
2017 |
Conference |
ME |
Dr. Monjur Mourshed |
| 382 |
Techno-economic feasibility and size optimisation of an off-grid hybrid system for supplying electricity and thermal loads. |
Energy, 215(A), 119141. |
Das, B. K., Tushar, M. S. H. K., Zaman, F. |
2021 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 383 |
Techno-Economic Optimisation of Stand-alone Hybrid Renewable Energy Systems for Concurrently Meeting Electric and Thermal Loads. |
Sustainable Cities and Society, 68, 102763 |
Das, B. K., Tushar, M. S. H. K., Hassan, R. |
2021 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 384 |
Techno-economic and environmental assessment of a hybrid renewable energy system using multi-objective genetic algorithm: A case study for remote Island in Bangladesh |
Energy Conversion and Management, 230, 113823 |
Das, B. K., Hassan, R., Tushar, M. S. H. K., Zaman, F., Hasan, M., Das, P. |
2021 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 385 |
Efficiency Analysis of Crude Versus Pure Cellulase in Industry |
Springer, Singapore, pp. 283-298 |
Tushar M.S.H.K., Dutta A. |
2020 |
Book Chapter |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 386 |
Bio-hydrogen Production by Catalytic Supercritical Water Gasification: A Comparative Study |
ACS Omega, 5, 25, 15390–15401 |
Tushar, M. S. H. K., DiMaria, P. C., Al-Salem, S. M., Dutta, A., Xu, C. C. |
2020 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 387 |
An Optimized Design of Electromagnet and Float for a Magnetic Suspension System |
Acta Electronica Malaysia (AEM), 3(1), pp.14-18. |
Hasan, S. M., Tushar, M. S. H. K., Rahman, M. H., Shimu, A. R. |
2019 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 388 |
Biomass Energy |
Elsevier, pp. 770-794 |
Xu, C. C., Liao, B., Pang, S., Nazari, L., Mahmood, N., Tushar, M.S.H.K., Dutta, A., Ray, M.B. |
2018 |
Book Chapter |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 389 |
Catalytic supercritical gasification of biocrude from hydrothermal liquefaction of cattle manure |
Applied Catalysis B: Environmental, 189, 119-132. |
Tushar, M. S. H. K., Dutta, A., Xu, C. C. |
2016 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 390 |
Simulation and kinetic modeling of supercritical water gasification of biomass |
International Journal of Hydrogen Energy. 40(13); pp. 4481–4493. |
Tushar, M. S. H. K., Dutta, A., Xu, C. C. |
2015 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 391 |
Effects of reactor types, operating conditions and challenges for SCWG of real wet biomass. |
Springer-Verlag, Heidelberg, pp. 207-228 |
Tushar, M. S. H. K., Dutta, A., Xu, C. C. |
2014 |
Book Chapter |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 392 |
Ash Analysis of Poultry Litter, Willow and Oats for Combustion in Boilers |
Journal of Biomass to Biofuel, 1; pp. 16-26. |
Acharya, B., Dutta, A., Mahmud, S., Tushar, M. S. H. K., Leon, M. |
2014 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 393 |
Production, characterization and reactivity studies of chars produced by the isothermal pyrolysis of flax straw |
Biomass & Bioenergy, 37; pp. 97–105 |
Tushar, M.S.H.K., Mahinpey, N., Khan, A., Ibrahim, H., Kumar, P., Idem, R. |
2012 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 394 |
Analysis of gaseous and liquid products from pressurized pyrolysis of flax straw in a fixed bed reactor |
Industrial & Engineering Chemistry Research, 49; pp. 4627-4632 |
Tushar, M.S.H.K, Mahinpey N., Murugan P. Mani T. |
2010 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 395 |
Combined Effect of EGR and Inlet Air Preheating on Engine Performance in Diesel Engine |
International Energy Journal, RERIC, AIT, 9(2), pp. 109-116 |
Shahadat, M., M. Z., Nabi, M. N., Tushar, M. S. H. K. |
2008 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 396 |
Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes. |
Journal of Analytical and Applied Pyrolysis, 82(1); pp. 96-109 |
Islam, M.R., Tushar, M.S.H.K., Haniu, H. |
2008 |
Journal |
ME |
Dr. Mohammad Shahed Hasan Khan Tushar |
| 397 |
IoT Implemented Encryption Voice Transmission System with Particle Photon Microcontroller |
4th International Conference on Energy and Power (ICEP) |
M. Mastive Ali, Avijik Mallik, M. M. Zaglul Shahadat |
2022 |
Conference |
ME |
Dr. Mhia Md. Zaglul Shahadat |
| 398 |
IoT Implemented VoIP System using MATLAB |
5th International Conference on Mechanical, Industrial and Material Engineering (ICMIME) |
M. Mastive Ali, Avijik Mallik, M. M. Zaglul Shahadat |
2022 |
Conference |
ME |
Dr. Mhia Md. Zaglul Shahadat |
| 399 |
Design and fabrication of a magnetic bearing using magnetic edge effect |
Engineering Research Express 3(1) |
Md. Alamgir Hossain, Md. Abu Sufian, Fazlur Rashid, Mhia Md. Zaglul Shahadat |
2021 |
Journal |
ME |
Dr. Mhia Md. Zaglul Shahadat |
| 400 |
Optimum Blade Design of Pinwheel Type Horizontal Axis Wind Turbine for Low Wind Speed Areas |
International Conference on Automation, Control and Mechatronics for Industry 4.0 (ACMI) |
M. R. Islam, Z. Sultana, S. A. Iffat, M. M. Zaglul Shahadat |
2021 |
Conference |
ME |
Dr. Mhia Md. Zaglul Shahadat |
| 401 |
A Small Scale Wind Turbine With Controlled Wind Flow detection Features |
5th International Conference on Electrical Information and Communication Technology (EICT) |
M. M. Zaglul Shahadat, F. Chowdhury, M. R. Islam, F. Hawlader |
2021 |
Conference |
ME |
Dr. Mhia Md. Zaglul Shahadat |
| 402 |
Vibration Isolation System with Kalman Filter Estimated Acceleration Feedback: An Approach of Negative Stiffness Control |
Hindawi Journal of Sensors |
Mhia Md. Zaglul ShahadatTakeshi MizunoMasaya Takasaki,Yuji Ishino |
2021 |
Journal |
ME |
Dr. Mhia Md. Zaglul Shahadat |
| 403 |
Techno-economic Optimization of a zero Emission Energy System for a Coastal Community at Newfoundland, Canada |
Elsevier |
M. S. Islam, Barun Kumar Das, Pronob Das, Habibur Rahaman |
2020 |
Journal |
ME |
Md Saiful Islam |
| 404 |
Production of liquid fuel from co-pyrolysis of polythene waste and rice straw |
Energy procedia, Elsevier |
Hossain, M.S., Ferdous, J., Islam, M.S., Islam, M.R., Mustafi, N.N. and Haniu, H., |
2019 |
Journal |
ME |
Md Saiful Islam |
| 405 |
Energy efficiency improvement of submersible pumps using in barind area of Bangladesh |
Energy procedia, Elsevier |
Haque, M.E., Islam, M.S., Islam, M.R., Haniu, H. and Akhter, M.S., |
2019 |
Journal |
ME |
Md Saiful Islam |
| 406 |
Feasibility Analysis of Municipal Solid Waste (MSW) for Energy Production in Rajshahi City Corporation |
AIP |
Pronob Das, M. S. Islam, and Nurul Huda |
2019 |
Journal |
ME |
Md Saiful Islam |
| 407 |
Effect of drawdown on submersible pump performance |
Mechanical Engineering Research Journal |
Islam, M. S., Haque, M. E., Islam, M. R., Rahman, M. M |
2018 |
Journal |
ME |
Md Saiful Islam |
| 408 |
Efficiency Enhancement of Two Pass Solar Collector with Steel Matrix in the Region of Rajshahi, Bangladesh |
Int. J. Mech. Eng. Autom |
Roy, A., Hoque, M.E., Islam, M.S., Sarker, M.R.I. and Das, B.K |
2017 |
Journal |
ME |
Md Saiful Islam |
| 409 |
Life Cycle Cost and Energy Consumption Behavior of Submersible Pumps Using in the Barind Area of Bangladesh. |
Energy procedia, Elsevier |
Haque, M.E., Islam, M.S., Islam, M.R., Haniu, H. and Akhter, M.S., |
2017 |
Journal |
ME |
Md Saiful Islam |
| 410 |
Development of a vacuum double-slope solar still for enhanced freshwater productivity |
Solar Energy (Elsevier) |
Saha, S.; Sarker, M.R.I.; Kader, M.A.; Ahmed, M.M.; Tuly, S.S.; Mustafi, N.N. |
2024 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 411 |
Mathematical Modelling of Heat and Mass Transfer during Jackfruit Drying Considering Shrinkage |
Energies (MDPI) |
Tuly, S.S.; Joardder, M.U.H.; Welsh, Z.G.; Karim, A. |
2023 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 412 |
Investigation of a modified double slope solar still integrated with nanoparticle-mixed phase change materials: Energy, exergy, exergo-economic, environmental, and sustainability analyses |
Case Studies in Thermal Engineering (Elsevier) |
Tuly, S.S.; Islam, M.S.; Hassan, R.; Das, Barun K.; Sarker, M.R.I. |
2022 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 413 |
Investigating the energetic, exergetic, and sustainability aspects of a solar still integrating fins, wick, phase change materials, and external condenser |
Journal of Energy Storage (Elsevier) |
Tuly, S.S.; Hassan, R.; Das, Barun K.; Sarker, M.R.I. |
2022 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 414 |
Performance investigation of active double slope solar stills incorporating internal sidewall reflector, hollow circular fins, and nanoparticle-mixed phase change material |
Journal of Energy Storage (Elsevier) |
Tuly, S.S.; Ayon, A.B.S.; Hassan, R.; Das, Barun K.; Khan, R.H.; Sarker, M.R.I. |
2022 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 415 |
Thermal performance analysis of a solar still with different absorber plates and external copper condenser |
Groundwater for Sustainable Development (Elsevier) |
Nehar L.; Rahman T.; Tuly, S.S.; Rahman, M.S.; Sarker, M.R.I.; Beg, M.R.A. |
2022 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 416 |
Mathematical modeling of nutritional, color, texture, and microbial activity changes in fruit and vegetables during drying: A critical review |
Critical Reviews in Food Science and Nutrition (Taylor & Francis) |
Tuly, S.S., Mahiuddin, M., Karim, M.A. |
2021 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 417 |
Effects of design and operational parameters on the performance of a solar distillation system: A comprehensive review |
Groundwater for Sustainable Development (Elsevier) |
Tuly, S.S.; Sarker, M.R.I.; Das, Barun K.; Rahman, M.S. |
2021 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 418 |
Analysis of chemical, morphological, energy efficiency, and fuel properties of bamboo torrefaction |
Biofuels (Taylor & Francis ) |
Tuly, S.S.; Ferdous, O.; Siddik, S.M.A.B.; Ekhtader, M.A, Rahman, M.S.; Sarker, M.R.I. |
2021 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 419 |
PERFORMANCE EVALUATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM (VARS) OPERATING WITH SOLAR ASSISTED ORGANIC RANKINE CYCLE (ORC) |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE)) |
Parvej, A.M.; Tuly, S.S.; Mitul, M.H.; Elahe, A.; Mourshed, M.; Sarker; M.R.I. |
2021 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 420 |
Combined influence of fin, phase change material, wick, and external condenser on the thermal performance of a double slope solar still |
Journal of Cleaner Production (Elsevier) |
Tuly, S.S.; Rahman, M.S.; Sarker, M.R.I.; Beg, R.A. |
2020 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 421 |
Liquid fuel production by pyrolysis of polythene and PET plastic |
AIP Conference Proceedings |
Tuly, S.S.; Joarder, M.S.; Haque, M.E. |
2019 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 422 |
Performance test of a solar still for different surface to volume ratio absorber plate with an external condenser |
AIP Conference Proceedings |
Rahman, M.T.; Nehar, L.; Sarker, M.R.I.; Tuly, S.S.; Beg, R.A. |
2019 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 423 |
Experimental investigation of single basin solar still using phase change material (PCM) as an energy storage medium |
AIP Conference Proceedings |
Khan, M.A.; Karmakar, R.; Sarker, M.R.I.; Tuly, S.S.; Beg, R.A. |
2019 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 424 |
Performance study of a water desalination system under vacuum |
ICMIME 2019, December, 2019, RUET, Rajshahi, Bangladesh |
Saha, S.; Sarker, M.R.I.; Tuly, S.S. |
2019 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 425 |
A standalone smart braking system for automotive vehicle |
Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11 – 13 December, 2019, Chittagong, Bangladesh |
Tuly, S.S., Rashid, F.; Jaman, T.; Sarker, M.R.I. |
2019 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 426 |
Experimental Investigation of the Combined Effect of Fin, Phase Change Material and External Condenser on the Yield of Solar Still |
SSRG International Journal of Mechanical Engineering (SSRG-IJME) |
Tuly, S.S.; Sarker, M.R.I.; Saha, S. |
2019 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 427 |
Numerical study on the influence of vortex flow and recirculating flow into a solid particle solar receiver |
Renewable Energy (Elsevier) |
Sarker, M.R.I.; Mandal, S.; Tuly, S.S. |
2018 |
Journal |
ME |
Sumaiya Sadika Tuly |
| 428 |
Numerical Study of a Stand-alone Flat Plate Solar Water Heater using Rectangular Flow Channel with Fin |
International Conference on Mechanical, Industrial and Energy Engineering 2018 23-24 December, 2018, Khulna, BANGLADESH |
Rashid, F.; Sarker, M.R.I.; Tuly, S.S.; Ferdous, J.; Beg, R.A. |
2018 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 429 |
Pyrolysis kinetics study of three biomass solid wastes for thermochemical conversion into liquid fuels |
AIP Conference Proceedings |
Tuly, S.S.; Parveen, M.; Islam,M. R.; Rahman, M. S.; Haniu, H. |
2017 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 430 |
Production and application of biodiesel from waste cooking oil |
AIP Conference Proceedings |
Tuly, S. S.; Saha,M.; Mustafi, N. N., Sarker, M. R. I. |
2017 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 431 |
Comparative Study of Tara Dev and Hybrid Tara Pump with Respect to Water Level in Rajshahi |
International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015) 11-13 December, 2015, RUET, Rajshahi, Bangladesh. |
Tuly, S.S.; Zaman, M.S.; Islam, M.R. |
2015 |
Conference |
ME |
Sumaiya Sadika Tuly |
| 432 |
Analysis of chemical, morphological, energy efficiency, and fuel properties of bamboo torrefaction |
Biofuels Volume 13, 2022 - Issue 7 |
Tuly, S. S., Ferdous, O., Siddik, S. A. B., Ekhtader, M. A., Rahman, M. S., & Sarker, M R I |
2022 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 433 |
Thermal performance analysis of a solar still with different absorber plates and external copper condenser |
Groundwater for Sustainable Development, 17, 100763 |
Nehar, L., Rahman, T., Tuly, S., Rahman, M. S., Sarker, M R I. & Beg, R. A |
2022 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 434 |
Investigation of a modified double slope solar still integrated with nanoparticle-mixed phase change materials: energy, exergy, exergo-economic, environmental, and sustainability analyses |
Case Studies in Thermal Engineering Volume 37, September 2022, 102256 |
Tuly, S., Islam, M., Hassan, R., Das, B. K., Sarker, M R I |
2022 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 435 |
Investigating the energetic, exergetic, and sustainability aspects of a solar still integrating fins, wick, phase change materials, and external condenser |
Journal of Energy Storage Volume 55, Part A, 1 November 2022, 105462 |
Tuly, S., Hassan, R., Das, B. K., & Sarker, M R I. |
2022 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 436 |
Performance investigation of active double slope solar stills incorporating internal sidewall reflector, hollow circular fins, and nanoparticle-mixed phase change material |
Journal of Energy Storage Volume 55, Part C, 25 November 2022, 105660 |
Tuly, S., Ayon, A., Hassan, R., Das, B. K., Khan, R., & Sarker, M R I |
2022 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 437 |
Effects of design and operational parameters on the performance of a solar distillation system: a comprehensive review |
Groundwater for Sustainable Development Volume 14, August 2021, 100599 |
Tuly, S., Sarker, M R I. Das, B. K., & Rahman, M |
2021 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 438 |
Combined influence of fin, phase change material, wick, and external condenser on the thermal performance of a double slope solar still |
Journal of Cleaner Production Volume 287, 10 March 2021, 125458 |
S.S. Tuly, M.S. Rahman, M.R.I. Sarker, R.A. Beg |
2021 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 439 |
Performance evaluation of a vapor absorption refrigeration system (VARS) operating with solar assisted organic rankine cycle (ORC) |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 12-14 December, 2021, Chattogram, Bangladesh |
Parvej, A.M.; Tuly, S.S.; Mitul, M.H.; Elahe, A.; Mourshed, M.; Sarker; M.R.I. |
2021 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 440 |
Synthesis of nano silica particle from silica sand and characterization of nano silica based R134a refrigerant |
Materials Today: Proceedings Volume 46, Part 15, 2021, Pages 6816-6821 |
Md. Wakil Ur Rahman, Mustafizur Rahman, M.R.I. Sarker, Fazlur Rashid, Md. Masum Al Mahmud |
2021 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 441 |
A Study on Aerosol Spray Characteristics of Different Size Atomizers |
Aerosol Science and Engineering, (Springer) 4(4), 306– 19. doi:10.1007/s41810-020-00076-0 |
Sarker, M. R. I., Rahman, M. S., Mandal, S., & Rony, M. M |
2020 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 442 |
Experimental Investigation of the Combined Effect of Fin, Phase Change Material and External Condenser on the Yield of Solar Still |
SSRG International Journal of Mechanical Engineering 6(8), 1-5. |
Tuly, S. S., Sarker,M R I. Saha S |
2019 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 443 |
A standalone smart braking system for automotive vehicle |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 11-13 December, 2019, Chittagong, Bangladesh |
Tuly, S. S., F. Rashid, Sarker, M. R. I. |
2019 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 444 |
Performance study of a water desalination system under vacuum. |
International Conference on Mechanical Industrial and Materials Engineering (ICMIME), 17-19 December, 2019, RUET, Rajshahi, Bangladesh |
Saha, S., Sarker, M. R. I., Tuly, S. S |
2019 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 445 |
Experimental investigation of single basin solar still using phase change material (PCM) as an energy storage medium |
AIP Conference Proceedings (Vol. 2121, No. 1, p. 120002). AIP Publishing |
Khan, M. A., Karmakar, R., Sarker, M. R. I., Tuly, S. S., & Beg, R. A |
2019 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 446 |
Performance test of a solar still for different surface to volume ratio absorber plate with an external condenser |
AIP Conference Proceedings (Vol. 2121, No. 1, p. 130003). AIP Publishing |
Rahman, M. T., Nehar, L., Sarker, M. R. I., Tuly, S. S., & Beg, R. A |
2019 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 447 |
Experimental and Numerical Analysis of a Stand-Alone PV/T System to Improve its efficiency |
J Fundam Renewable Energy Appl 2018, 8:1, DOI: 10.4172/2090-4541.1000253 |
Sazan Rahman*, M.R.I Sarker, Soumya Mandal and MRA Beg |
2018 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 448 |
Experimental study of a Hybrid Evacuated Tube Solar Collector using methanol as working fluid |
International Journal of Engineering research and Management(IJERM) [2018] ISSN:2349-2058, volume-05, Issue 07 |
J Ferdous, R A Beg and M R I Sarker |
2018 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 449 |
Numerical study on the influence of vortex flow and recirculating flow into a solid particle solar receiver |
Renewable Energy Volume 129, Part A, December 2018, Pages 409-418 |
M.R.I. Sarker , Soumya Mandal, Sumaiya Sadika Tuly |
2018 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 450 |
Numerical study of a Stand-alone Flat Plate Solar Water Heater using Rectangular Flow Channel with Fin |
International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2018, Khulna, Bangladesh |
Tuly, S. S., F. Rashid, Sarker, M. R. I. |
2018 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 451 |
An analysis of Braking Energy regeneration in electric vehicle |
International Journal of Renewable Energy Research, March 2017 |
Soumya Mandal Sazan Rahman*, MRI Sarker, and MRA Beg |
2017 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 452 |
Efficiency Enhancement of Two Pass Solar Collector with Steel Matrix in the Region of Rajshahi, Bangladesh |
Mech. Eng. Autom. Volume 4, Number 2, 2017, pp. 73-78. |
Amit Roy, M.S Islam, M.E.Hoque, M. R I Sarker |
2017 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 453 |
Experimental Investigation of Single Pass Solar Air heater With and Without Square Steel Wire Mesh on Absorber plate |
AIP Conference Proceedings, February 2017. |
S. Mandal, M.R.I. Sarker, M. S. Rahman |
2017 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 454 |
Experimental investigation of spray characteristics of a poly-disperse atomizer using different composition of ethanol |
International Conference on Engineering Research, Innovation and Education 2017,ICERIE 2017, 13 ̶ 15 January, SUST, Sylhet, Bangladesh |
M. M. Rony, M. S. Rahman, M. S. Akhter, N. N. Mustafi and M. R. I. Sarker |
2017 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 455 |
Production and application of biodiesel from waste cooking oil |
AIP Conference Proceedings 1851 (1), 020030Vol. 1851, No. 1, p. 020030 |
SS Tuly, M Saha, NN Mustafi, M.R.I Sarker |
2017 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 456 |
Design and Performance Study of a Circular Flow Channel Solar Water Heater |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh. |
Md. Mujahid Ul Islam1, M R I Sarker1 Md. Moshiur Rashid1 Md. Firojjaman1 MD. Samirul Islam1 |
2017 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 457 |
Recirculating metallic articles for the efficiency enhancement of concentrated solar receiver” |
Journal Renewable energy, Elsevier , Vol 96 (2016), PP 850-862. |
R I sarker , Manabendra shaha Md Sazan Rahman and R A Beg |
2016 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 458 |
A concentrated solar cavity absorber with direct heat transfer through recirculating metallic particles |
AIP Conference Proceedings 1754, 050040 (2016); doi: 10.1063/1.4958431 |
AIP Conference Proceedings 1754, 050040 (2016); doi: 10.1063/1.4958431 |
2016 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 459 |
Experimental Investigation of Single Pass Solar Air heater With and Without Square Steel Wire Mesh on Absorber plate |
International Conference on Mechanical, Industrial and Energy Engineering (2016) . |
Amit Roy, M.S Islam, M.E.Hoque, M. R I Sarker |
2016 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 460 |
Numerical Study of a Downdraft Gasifier to Produce Syngas |
International Conference on Thermal Engineering, 22 – 24 December, 2016 Dhaka, Bangladesh. |
S. Mandal, M.R.I. Sarker, M. S. Rahman and M.R.A. Beg |
2016 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 461 |
Experimental Investigation of a Hybrid Evacuated Tube Solar Collector |
International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015) 1 1-13 December, 2015, RUET, Rajshahi, Bangladesh |
J Ferdous, R A Beg and M R I Sarker |
2015 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 462 |
Heat Transfer performance evaluation for turbulent flow through a tube twisted with wire brush inserted |
Journal of International Communications in Heat and Mass Transfer, Elsevier, Vol 39 (2012), PP1505-1512. |
M.M.K. Bhuiya,⁎, M.S.U. Chowdhury, M. Islamb, J.U. Ahamed , M.J.H. Khan M.R.I.Sarker , and M. Saha |
2012 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 463 |
Balancing of an Inverted Pendulum using PD controller |
Journal of Science ,Vol60 (1) (2012) PP 115 -120 |
Mahadi Hasan, Chanca Saha, Md Mostafizur Rahman, Md. Rabiul Islam Sarker, Subrata K. Aditya |
2012 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 464 |
Exhaust Odor and Smoke Reduction of Stationary DI Diesel Engines to Acceptable Level by Water-scrubbing and Air-dilution System |
Journal of Applied Energy, Elsevier |
Murari Mohon Roy*, Riaz Parvez and Rabiul Islam Sarker |
2011 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 465 |
Valorization of Solid Tire Wastes Available in Bangladesh by Thermal Treatment |
Proceedings of 2nd International Conference on Solid Waste Management in Developing Countries - WasteSafe 2011 to be held on February 13-15, 2011 at Khulna, Bangladesh |
M. R. Islam, H. HANIU and M. R. Islam Sarker |
2011 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 466 |
Innovation in Pyrolysis Technology for Management of Scrap Tire: a Solution of Energy and Environment. International Journal of Environmental Science and Development |
Vol. 1, No. 1, (2010), ISSN:2010-0264 , 89-96 |
M. Rofiqul Islam, H. HANIU and M. R. Islam Sarker |
2010 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 467 |
Production of Diesel Fuel from Used Engine Oil |
International Journal of Mechanical & Mechatronics Engineering, IJMME-IJENS Vol: 10 No: 01, ISSN: 2077-124X. |
R.A.Beg, M.R.I Sarker, and Riaz Parvez |
2010 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 468 |
Comparison of Performance of a Single Axis and Two axis Sun Tracker |
Proceedings of the ICMME 2010, 23-24 December, Khulna, Bangladesh |
M.R. I sarker, R.A. Beg and Riaz Parvez |
2010 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 469 |
Identification of defective item from the Procduction Line |
Proceedings of the ICMIME 2010, 23-24 December, Khulna, Bangladesh. |
Mahmudul Hasan, S.K Choudhury, M.R. I Sarker and Riaz Parvez |
2010 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 470 |
Design Construction and Performance test of Fresnel‟s lens Concentrator |
Proceedings of the ICMME 2010, 23-24 December, Khulna, Bangladesh. |
Md. Riaz Parvez, M.R. I Sarker, Md. Arif and R.A Beg |
2010 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 471 |
Virtual Impactors: A Noble Device To Generate High Concentration Monodisperse Aerosols |
Proceedings of the 8th International Conference of Mechanical Engineers (ICME) and 26-28 December 2009, Dhaka |
Md. Shamim Akhter, M. Ariful Islam and M.R I Sarker |
2009 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 472 |
Performance Evaluation of a Microcontroller based Two axis Automatic Solar tracking system |
Mechanical Engineering Research Journal published by CUET. Vol. (6) ISSN 1990-5491. |
M.R. I. Sarker, M. R.A Beg, K.M,A Hoque |
2008 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 473 |
Fabrication and Experimental Study of a Novel Two-Axis Sun Tracker |
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 01, ISSN: 2077-124X |
M.R. I. Sarker, Riaz Parvez ,and R.A. Beg |
2008 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 474 |
An Experimental investigation of Perfomance of a Single Axis Sun Tracker through PV power output |
Proceedings of the 4th BSME – ASME conference on Mechanical Engineering, 27-29 December, Dhaka, Bangladesh |
R.A. Beg, M.R. I. Sarker, Riaz Parvez |
2008 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 475 |
Emission Control in DI Diesel Engine Using Mixture of Aquous Salt Solution Diesel Emulsion |
Proceedings of the 7th International Conference of Mechanical Engineers (ICME) and 29-31 December 2007, Dhaka |
M.R.A Beg, M.R.I. Sarker, M Rahman and Seikh Md Najmul Haque, |
2007 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 476 |
Design of a New Beneficial Single Axis Automatic Controlled Solar Tracker |
Proceedings of the 11th APM, 26-27 December, 2006, IEB |
M.R. I. Sarker, R.A. Beg, M.Z. Hossain and M.T.Islam |
2006 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 477 |
Design of a Software Controlled Automatic guided Vehicle to overcome accident |
Proceedings of the 11th APM, 26-27 December, 2006, IEB, Dhaka, Bangladesh |
M.R. I. Sarker, R.A. Beg, M.Z. Hossain and A.R.Patowery |
2006 |
Conference |
ME |
Dr. Md Rabiul Islam Sarker |
| 478 |
Design of a Software Controlled Two axis Automatic Solar tracking system |
Mechanical. Engg. Research. Journal, CUET,Bangladesh. Vol. 5 (2005), ISSN 1990-5491 |
M.R. I. Sarker, M.R. Zaman, M. R.A Beg, M. T. Islam and M.Z. Hossain |
2005 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 479 |
Design of a Software Controlled Two axis Automatic Solar tracking system |
Mechanical. Engg. Research. Journal, CUET,Bangladesh. Vol. 5 (2005), ISSN 1990-5491 |
M.R. I. Sarker, M.R. Zaman, M. R.A Beg, M. T. Islam and M.Z. Hossain |
2005 |
Journal |
ME |
Dr. Md Rabiul Islam Sarker |
| 480 |
Hydrogen Production via Gasification of common wood pellet in Bangladesh: Process Parameters Effects, Optimization, and Mathematical Modelling |
Journal of Hydrogen Energy, Elsevier (Impact factor: 7.2, Under review) |
Md. Sanowar Hossain, Mujahidul Islam Riad, Showmitro Bhowmik |
2024 |
Journal |
ME |
Md. Sanowar Hossain |
| 481 |
Production, characterization, upgradation of co-pyrolytic oil from tea waste and potato skin |
Mechanical Engineering Research Journal (MERJ), Vol. 13. |
M. S. Hossain, S. Paul, S. S. Nuhash, M. I. Riad, and S. Bhowmik |
2024 |
Journal |
ME |
Md. Sanowar Hossain |
| 482 |
Valorization of food waste into hydrogen energy through supercritical water gasification: Generation potential and techno-econo-environmental feasibility assessment |
Journal of Hydrogen Energy, Elsevier, Q1 (Impact factor: 7.2), Under review |
Md. Sanowar Hossain, Fairuz Wasima, Md. Sharul Islam Khan Shawon, Monjur Mourshed |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 483 |
Production of bioethanol and biobutanol from seaweed biomass |
Royal Society of Chemistry |
Md. Sanowar Hossain, Fairuz Wasima, Md. Sharul Islam Khan Shawon, Md. Nahid Hossan, Monjur Mourshed |
2023 |
Book Chapter |
ME |
Md. Sanowar Hossain |
| 484 |
Valorization of tea waste and potato skin through co-pyrolysis techniques: validation of numerical results with experiment work and future challenges |
Clean Technologies and Environmental Policy, Springer Nature, Q1(Impact factor:4.2) Under review |
Md. Sanowar Hossain, Sanjay Paul, Fazlar Rahman Foysal, Barun K. Das, Md. Golam Kibria, Sadman Soumik Nuhash |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 485 |
Performance investigation of a vertical axis wind turbine: process parameters effects, optimization, and mathematical modeling |
Journal of Heliyon (Elsevier), Q1, Impact factor: 4.00) Under review |
Md. Sanowar Hossaina, Md. Al Amin Rahman, Sanjay Paul, Md. Arif Istiak Shiam, Barun K. Das |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 486 |
Advancements in Adsorption Based Carbon Dioxide Capture Technologies- A Comprehensive Review |
Journal of Heliyon, Elsevier, Q1, Impact factor: 5.2 |
Das, A., Peu, S. D., Hossain, M. S., Nahid, M. M. A., Karim, F. R. B., Chowdhury, H., Porag, M. H., Argha, D. B. P., Saha, S., Islam, A. R. M. T., Salah, M. M., Shaker, A. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 487 |
Characterization, performance assessment, techno-economic potential, and process optimization of scrap tire pyrolysis in Bangladesh |
Journal of Cleaner Production (Elsevier, Q1, Impact Factor: 11.1) |
Hossain, M. S., Shozib, I. A., Das, B. K., Hossain, M. S., Das, A., Islam, M. R., Kulsuma, M |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 488 |
Theoretical estimation of energy potential and environmental emissions mitigation for major livestock manure in Bangladesh |
Journal of Renewable Energy (Elsevier, Q1, Impact Factor: 8.9) |
Hossain, M. S., Masuk, N. I., Das B. K., Das, A., Kibria, M. G., Chowdhury, M. M., & Shozibb, I. A |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 489 |
An energy-efficient pumping system for sustainable cities and society: Optimization, mathematical modeling, and, impact assessment |
Journal of Energy Reports (Elsevier, Q1, Impact Factor: 5.2) |
Hossain, M.S., Islam, M.R., Das, A., Himel, H.H., Das, B. K., Roy, T. K., & Hasan, M. S |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 490 |
Integration of ion transport membrane with conventional powerplant to enhance the plant capacity with improved power production. |
Journal of Heliyen (Elsevier, Q1, Impact Factor: 4.0) |
Das, A., Datta, S., Hossain, M. S., & Kumar, B |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 491 |
A Comprehensive Review on Recent Advancements in Absorption-Based Post Combustion Carbon Capture Technologies to Obtain a Sustainable Energy Sector with Clean Environment. Sustainability |
Journal of Sustainability (MDPI,Q1, Impact factor: 3.3) |
Peu, S. D., Das, A., Hossain, M. S., Akanda, M. A. M., Akanda, M. M. H., Rahman, M., … Salah, M. M. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 492 |
Metal Oxide Nanosheet: Synthesis Approaches and Applications in Energy Storage Devices (Batteries, Fuel Cells, and Supercapacitors) |
Journal of Nanomaterials (MDPI, Q1, Impact factor: 5.7) |
Das, A., Peu, S. D., Hossain, M. S., Akanda, M. A. M., Salah, M. M., Akanda, M. M. H., … Das, B. K. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 493 |
A novel approach for sustainable energy for pumping and irrigation |
Journal of Clean Technologies and Environmental Policy (Springer nature, Q1, Impact factor: 4.3) |
Hossain, M. S., Chowdhury, M. M., Das, B. K., Das, A., & Parvej, A. M. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 494 |
Water supply network in Rajshahi City Corporation: water quality, regeneration effect and pump performance |
Journal of Engineering and Applied Science (JEAS)”, RUET, (Under Review) |
Md. Sanowar Hossain, Asma-Ul-Husna, Mohammad Rofiqul Islam |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 495 |
Investigating the techno-economic and environmental feasibility of biogas-based power generation potential using food waste in Bangladesh |
Journal of Renewable Energy (Elsevier, Q1, Impact factor: 8.9) Under review |
Hossain, M. S., Das, B. K., & Roy, T. K. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 496 |
Design, fabrication and performance study of a downdraft gasifier |
International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE-2023) |
Md. Sanowar Hossain, Showmitro Bhowmik, Mujahidul Islam Riad, Sanjay Paul, Sadman Soumik Nuhash1 |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 497 |
Impact of Environmental Parameters, Nano-PCM, Fins, Sponges, and Thermal Storage on the Freshwater Productivity of Direct Solar Still: A Review |
Journal of Solar Energy (Elsevier, Q1, Impact factor: 7.5) |
Kibria, M. G., Kanka S. D., Anika, U. A., Das, B. K., Hossain, M. S., & Roy, D. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 498 |
Production, characterization, upgradation of co-pyrolytic oil from tea waste and potato skin |
International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE-2023) |
Md. Sanowar Hossain, Sanjay Paul, Sadman Soumik Nuhash, Mujahidul Islam Riad, Showmitro Bhowmik |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 499 |
Exploring the Progress of Solar Assisted Heat Pump-Based Thermal Energy Systems for Building HVAC Applications: A Comprehensive Review |
Journal of Processes (MDPI, Q2, Impact Factor:3.7) Under Review |
Das, A., Peu, S. D., Hossain, M. S., Paul, D. B., Chowdhury, A. H., Karim, F. R. B., Porag, M. H., Das, B. K., Islam, A. R. M., Shaker, A., & Salah. M. M. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 500 |
Upgradation of Co-pyrolytic oil through fractional and normal distillation |
International Conference on Chemical Engineering (ICChE-2023) |
Md. Sanowar Hossain*, Sanjay Paul, Sadman Soumik Nuhash |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 501 |
Manure technology and sustainable development: Anaerobic Co-digestion of Liquid Dairy Manure with Food Waste: A Sustainable Source of Green Energy. |
Manure Technology and Sustainable Development, Sustainable Materials and Technology (Springer nature) |
Masud, M. H., Ananno, A. A., Hossain, M. S., Chowdhury, S. A., & Dabnichki, P. |
2023 |
Book Chapter |
ME |
Md. Sanowar Hossain |
| 502 |
Techno-econo-environmental feasibility analysis of hydrogen energy production by gasification of food waste in Rajshahi City, Bangladesh |
International Conference on Chemical Engineering (ICChE-2023) |
Md. Sanowar Hossain, Fairuz Wasima, Md. Sharul Islam K han Shawon, Sanjoy Paul |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 503 |
Waste Management and Resource Recycling in the Developing World: Generation of waste: problem to possible solution in developing and underdeveloped nations. |
Manure Technology and Sustainable Development, Sustainable Materials and Technology (Elsevier nature) |
Masud, M. H., Mourshed, M., Hossain, M. S., Ahmed, N. U., & Dabnichki, P. |
2023 |
Book Chapter |
ME |
Md. Sanowar Hossain |
| 504 |
Investigation of engine performance, combustion, and emission characteristics using co-pyrolytic oil of tea waste and potato skin |
International Conference on Mechanical Engineering (ICME2023) |
Md. Sanowar Hossain, Sanjay Paul, Sadman Soumik Nuhash, Mujahidul Islam Riad, Showmitro Bhowmik |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 505 |
Experimental investigation of co-pyrolysis oil production from tea waste and potato skin: characterization, upgradation, and product optimization using response surface methodology |
Journal of Renewable & Sustainable Energy Reviews (Elsevier, Q1, Impact Factor: 16.8) Under Review |
Hossain, M.S.; Paul, S; Das, B.K,; Nuhash, S.S; Bhowmik, S; Riad, M.I |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 506 |
Investigation on Effect of Equivalence Ratio on the Performance of a Downdraft Gasifier – An Experimental Approach |
Journal of Engineering and Applied Sciences (JEAS), RUET (Under Review) |
Md. Sanowar Hossain, Mujahidul Islam Riad, Showmitro Bhowmik, Sanjay Paul, Sadman Soumik Nuhash |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 507 |
Energy management and sizing of a stand-alone hybrid renewable energy system for community electricity, fresh water, and cooking gas demands of a remote island |
Journal of Energy Conversion and Management (Elsevier, Q1, Impact Factor:10.4) |
Das, B.K., Ahmed, M.M., Das, P., Hossain, M.S., Kibria, M.G. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 508 |
Energy generation and techno-economic potential assessment of poultry litter waste gasification in Bangladesh |
International Conference on Engineering Research, Innovation and Education (ICERIE) |
Hossain, M. S., Nuhash, S. S., Paul, S., Islam, M., &, & Bhowmik, S. |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 509 |
A critical review of biomass pyrolysis and it’s potential in Bangladesh. |
International Conference on Engineering Research, Innovation, and Education (ICERIE) |
Hossain, M. S., Nuhash, S. S., Paul, S., & Riad, M. I., & Bhowmik, S. |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 510 |
Energy generation and techno-economic potential assessment of anaerobic co-digestion of cow dung with food waste in Bangladesh. |
International Conference on Nano-Bio and Advanced Materials Engineering (NAME) |
Hossain, M. S., Das, B. K., & Islam, M. R. |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 511 |
Composite phase change materials and fins-based Li-ion Battery Thermal Management systems with design approach: A comprehensive review |
Journal of Process Safety and Environmental Protection, Elsevier, Q1, Impact factor: 7.8, (Under review). |
25. Kibria, M.G., Fahim, I.A., Mohtasim, M. S., Paul, U. K., Nafi, Hossain, M.S., Das, B. K., Mohammed, H. A. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 512 |
Sustainable Solar Irrigation in the northern and southern region of Bangladesh: A Techno-Economic Assessment and Future Prospects |
International Conference on Mechanical Engineering, ICME 2023, BUET, Bangladesh |
Miftahul Mobin Chowdhury, MTH Akash, SF Rahman, Muhammad Sammam Sadid, Imrul Kayes, Md. Sanowar Hossain, Nirendra Nath Mustafi |
2023 |
Conference |
ME |
Md. Sanowar Hossain |
| 513 |
Renewable energy to hydrogen production: Quest for methanation based on current developed technologies on the prospect of Bangladesh. |
Journal of Fuel (Elsevier Nature, Q1, Impact factor: 7.4) (Under Review) |
Pronob Das; Md. Shahriar Mohtasim; Utpol K. Paul; Md. Sanowar Hossain; Andrew Rowe |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 514 |
H2 energy production potential and global warming mitigation through the gasification of food waste |
Journal of Energy Reports (Elsevier Nature, Q1, Impact factor: 4.9), (Under Review) |
Md. Sanowar Hossain, Fairuz Wasima, Md. Sharul Islam Khan Shawon, Barun K. Das, Pronob Das, Sanjoy Paul |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 515 |
Performance study of a woody downdraft gasifier: Validation of numerical results with experimental work |
Journal of Case Studies in Thermal Engineering, Elsevier, Q1, Impact factor:6.8 (Under review) |
Md. Sanowar Hossaina,*, Showmitro Bhowmika, Mujahidul Islam Riada, Md. Golam Kibriaa, Barun K. Dasa, Sanjay Paula |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 516 |
A comprehensive review of methane production from renewable sources with carbon capture: Power to gas production in prospect of Bangladesh |
Journal of Cleaner Production, Elsevier nature, Impact factor: 11.072, Q1) (Under review). |
Das, P., Mohtasim, M.S., Paul, U. K., Hossain, M.S., Rowe., A. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 517 |
Characterization of paraffin wax PCM with Al2O3 and ZnO hybrid nanoparticles for thermal energy storage application in solar PVT system and its performance evaluation |
Solar Energy Materials and Solar Cells, Elsevier, Q1, Impact factor: 7.6 (Under review) |
Kibria, M.G., Paul, U.K., Mohtasim, M.S., Das, B.K., Hossain, M.S., Beg, M.R.A., Mustafi, N.N., Saidur, R. |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 518 |
Investigation of engine performance, combustion, and emission characteristics using co-pyrolytic oil of tea waste and potato skin used in a CI engine along with techno-econo-environmental feasibility analysis |
Journal of Renewable and Sustainable Energy Reviews (Elsevier nature, Q1, Impact Factor: 16.8), Submitted |
Md. Sanowar Hossaina,*, Sadman Soumik Nuhasha, Barun K. Dasa,b, Pronob Dasa,c, Sanjay Paula |
2023 |
Journal |
ME |
Md. Sanowar Hossain |
| 519 |
Energy consumption behavior analysis and experimental investigation of a novel technique for energy-efficient operation of submersible pumping system used in Barind Tract of Bangladesh |
Journal of Energy Efficiency (Springer, Q1, Impact Factor: 3.5) |
Hossain, M. S., Haque, M. E., Islam, M. R., & Himel, M. H. H |
2022 |
Journal |
ME |
Md. Sanowar Hossain |
| 520 |
Energy Consumption Behavior Analysis and Investigation of Submersible Pumping System Efficiency in Different Bore well at Rajshahi Division of Bangladesh |
AIP Conference Proceeding's |
Hossain, M. S., Islam, M. R., Roy, T. K., Mallik, N. I., & Himel, H. H. |
2022 |
Journal |
ME |
Md. Sanowar Hossain |
| 521 |
Techno-economic Evaluation of Sustainable Solar Irrigation in Northern Region of Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) |
Chowdhury, M. M., Hossain, M. S., Kayes, I., Sadid, M.S. |
2022 |
Conference |
ME |
Md. Sanowar Hossain |
| 522 |
Energy, Economic, and Environmental benefit Analysis of organic fraction of MSW through anaerobic digestion technology in Bangladesh. |
International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) |
Hossain, M. S., Das, B. K., Islam, M. R., Roy, T. K., & Bhowmik, S., Riad, M. I., Nuhash, S. S., & Paul, S. |
2022 |
Conference |
ME |
Md. Sanowar Hossain |
| 523 |
Assessment of an Optimum Off-grid Hybrid Energy System for Electrification in a Rural Area of Bangladesh |
International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) |
Hossain, M. S., Riad, M. I., Bhowmik, S., Nuhash, S. S., & Paul, S. |
2022 |
Conference |
ME |
Md. Sanowar Hossain |
| 524 |
Bowling Action Legality Testing in the Light of Biomechanics: A Review |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) |
Hasan, M. R. U., Hossain, M. S. |
2022 |
Conference |
ME |
Md. Sanowar Hossain |
| 525 |
Production and physicochemical properties analysis of co-pyrolytic oil derived from scrap tires and sawdust. |
Journal of Energy Sources, Part A: Recovery, Utilization and Environmental Effects (Taylor and Francis, Q1, Impact Factor: 2.9) |
Hossain, M. S., Shozib, I. A., & Islam, M. R. |
2021 |
Journal |
ME |
Md. Sanowar Hossain |
| 526 |
Performance Investigation of Submersible Pumping System using mechanical devices in different bore well. |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE) |
Hossain, M. S., Islam, M. R., Himel, M. H. H., Hasan, M. S., Roy, T. K., & M. N. I. |
2021 |
Conference |
ME |
Md. Sanowar Hossain |
| 527 |
Biofuel Production from Co-pyrolysis of Scrap tires and Sawdust |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) |
Hossain, M. S., Rinku, R. A., Moon, S. N. K., Parvej, A. M., Islam, M. R., & Kibria, M. G. |
2019 |
Conference |
ME |
Md. Sanowar Hossain |
| 528 |
Production and characterization of pyrolytic oil derived from co-pyrolysis of solid polythene waste and sawdust |
International Conference on Mechanical Engineering and Renewable Energy (ICMERE) |
Hossain, M. S., kibria, M. G., Parvej, A. M., & Islam, M. R. |
2019 |
Conference |
ME |
Md. Sanowar Hossain |
| 529 |
Leaf Spring for Light Vehicle: Comparison Among Conventional Steel, Composite Materials (Epoxy-E Carbon & Epoxy-E Glass) By Ansys Workbench. |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) |
Kibria, M. G., Arefin, M. . A., Kumar, P., & Hossain, M. S. |
2019 |
Conference |
ME |
Md. Sanowar Hossain |
| 530 |
Energy management and sizing of a stand-alone hybrid renewable energy system for community electricity, fresh water, and cooking gas demands of a remote island |
Energy Conversion and Management (IF: 10.4), Elsevier |
Mim Mashrur Ahmed, Barun K. Das, Pronob Das, Md Sanowar Hossain, Md Golam Kibria |
2024 |
Journal |
ME |
Pronob Das |
| 531 |
Hydrogen from food waste: Energy potential, economic feasibility, and environmental impact for sustainable valorization |
Energy Report (Elsevier) |
Md. Sanowar Hossain, Fairuz Wasima, Md. Sharul Islam Khan Shawon, Barun K. Das, Pronob Das, Sanjay Paul |
2024 |
Journal |
ME |
Pronob Das |
| 532 |
Investigation of a reliable and sustainable stand-alone hybrid energy system for freshwater supply: a case study |
Taylor & Francis |
Pronob Das, Barun K Das, MS Islam, Mushfiqur Rahman, Rakibul Hassan, Kumar Abir Shuvo |
2023 |
Journal |
ME |
Pronob Das |
| 533 |
Evaluating the prospect of utilizing excess energy and creating employments from a hybrid energy system meeting electricity and freshwater demands using multi-objective evolutionary algorithms |
Energy, Elsevier |
Pronob Das, Barun K. Das, Mushfiqur Rahman, Rakibul Hassan |
2022 |
Journal |
ME |
Pronob Das |
| 534 |
Techno-economic Optimization of a Zero Emission Energy System for a Coastal Community in Newfoundland, Canada |
Energy, Elsevier |
M.S. Islam, Barun K. Das, Pronob Das, Md. Habibur Rahaman |
2021 |
Journal |
ME |
Pronob Das |
| 535 |
Techno-economic and environmental assessment of a hybrid renewable energy system using multi-objective genetic algorithm: A case study for remote Island in Bangladesh |
Energy Conversion and Management (IF: 10.4), Elsevier |
Barun K. Das, Rakibul Hassan, Mohammad Shahed H. K. Tushar, Forhad Zaman, Mahmudul Hasan, Pronob Das |
2021 |
Journal |
ME |
Pronob Das |
| 536 |
Impact of Storage Technologies, Temporal Resolution, and PV Tracking on Stand-alone Hybrid Renewable Energy for an Australian Remote Area Application |
Renewable Energy |
Barun K Das, Mahmudul Hasan, Pronob Das |
2021 |
Journal |
ME |
Pronob Das |
| 537 |
Effects of different environmental and operational factors on the PV performance: A comprehensive review |
Energy Science & Engineering, Wiley |
Khaled Hasan, Sumaiya Binty Yousuf, Mohammad Shahed Hasan Khan Tushar, Barun K. Das, Pronob Das, Md. Saiful Islam |
2021 |
Journal |
ME |
Pronob Das |
| 538 |
Feasibility and techno-economic analysis of stand-alone and grid-connected PV/Wind/Diesel/Batt hybrid energy system: A case study |
Energy Strategy Reviews, Elsevier |
Barun K.Das, Majed A.Alotaibi, Pronob Das, M.S. Islam, Sajal K. Das, Md Alamgir Hossain |
2021 |
Journal |
ME |
Pronob Das |
| 539 |
Optimum Design of a Grid Connected PV/Battery Hybrid System for Commercial Load in Bangladesh: Effects of PV, Battery, and Dispatch Strategies |
International Conference on Mechanical, Industrial and Energy Engineering 2020 19-21 December, 2020, Khulna, BANGLADESH |
Pronob Das, Barun K. Das, Sabri Md.Safir, Tarak Hossain, Mahin Ashad, Md. Saiful Islam |
2020 |
Conference |
ME |
Pronob Das |
| 540 |
A Review on Pump‐hydro Storage for Renewable and Hybrid Energy Systems Applications |
Energy Storage, Wiley Online Library |
Pronob Das, Barun K. Das, Nirendra N. Mustafi, Md. Takmil Sakir |
2020 |
Journal |
ME |
Pronob Das |
| 541 |
Perspective of biomass energy conversion in Bangladesh |
Clean Technologies and Environmental Policy, 21(4), 719-731. |
Masud, M. H., Ananno, A. A., Arefin, A. M., Ahamed, R., Das, P. |
2019 |
Journal |
ME |
Pronob Das |
| 542 |
Energy Harvesting by Using Piezoelectric Material into the Key of a Prototype Keyboard |
ICMIME 2019, December, 2019, RUET, Rajshahi, Bangladesh. |
Asma-Ul-Husna, Afsana Hossain Dristy, Farhana Afrin Lam, Ashraf Siddiquee, Pronob das |
2019 |
Conference |
ME |
Pronob Das |
| 543 |
Performance Analysis of a Box type Solar Cooker |
ICMIME 2019, December, 2019, RUET, Rajshahi, Bangladesh. |
Pronob Das, Ashik Ali, Sourav Mahmud, M.S. Akhter |
2019 |
Conference |
ME |
Pronob Das |
| 544 |
Diesel Exhaust Particulate Matter Emission Reduction by Electrostatic Precipitation Method |
ICMIME 2019, December, 2019, RUET, Rajshahi, Bangladesh. |
Pronob Das, Shahalam Rahman, Sourav Ghosh, M.S. Akhter |
2019 |
Conference |
ME |
Pronob Das |
| 545 |
Process analysis and gasification of rice husk by using downdraft fixed bed gasifier |
AIP Conference Proceedings, vol. 2121, no. 1, p. 130005 |
Hoque, M. E., F. Rashid, S. S. Aziz, M. N. Rahman, and Pronob Das. |
2019 |
Conference |
ME |
Pronob Das |
| 546 |
Feasibility analysis of municipal solid waste (MSW) for energy production in Rajshahi City Corporation |
AIP Conference Proceedings (Vol. 2121, No. 1, p. 120004) |
Das, P., Islam, M. S., & Huda, N. |
2019 |
Conference |
ME |
Pronob Das |
| 547 |
Agricultural Scenario and Solar Irrigation System of Bangladesh |
ICMIEE 2018, December, 2018, KUET, Khulna, Bangladesh. |
Md. Saiful Islam, Md. Bakhtier Khilji, Pronob Das |
2018 |
Conference |
ME |
Pronob Das |
| 548 |
Assessment of Sound Level at Different Locations of Rajshahi City |
ICMIME 2017, 28-30 December, 2017, RUET, Rajshahi, Bangladesh. |
Das, P., Haque, Z., & Akhter, M. S. |
2017 |
Conference |
ME |
Pronob Das |
| 549 |
Methanol Production From Biogas: Current Status and Future Prospects |
Reference Module in Chemistry, Molecular Sciences and Chemical Engineering (Elsevier) |
Md. Nahid Hossan, Mim Mashrur Ahmed, Milind Siddhpura, Anan Ashrabi Ananno, Mahadi Hasan Masud |
2023 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 550 |
Domestic Waste To Energy, Technologies, Economics, and Challenges |
Reference Module in Earth Systems and Environmental Sciences (Elsevier) |
Mahadi H. Masud, Moshiur Rashid, Md. Nahid Hossan, Mim M. Ahmed |
2023 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 551 |
Anaerobic Co-digestion of Liquid Dairy Manure with Food Waste: A Sustainable Source of Green Energy |
Manure Technology and Sustainable Development (Springer) |
Mahadi Hasan Masud, Anan Ashrabi Ananno, Md Sanowar Hossain, Sami Ahbab Chowdhury & Peter Dabnichki |
2023 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 552 |
Prospect of Chicken Litter as a Source of Sustainable Energy |
Manure Technology and Sustainable Development (Springer) |
Mahadi Hasan Masud, Anan Ashrabi Ananno, Mosarrat Mahjabeen, Nufile Ahmed & Peter Dabnichki |
2023 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 553 |
Generation of waste: problem to possible solution in developing and underdeveloped nations |
Waste Management and Resource Recycling in the Developing World (Elsevier) |
Mahadi Hasan Masud, Monjur Mourshed, Md. Sanowar Hossain, Nufile Uddin Ahmed, Peter Dabnichki |
2023 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 554 |
Feasibility of penguin geometric features for the biomimetics applications: overview and analysis |
Meccanica (Springer) |
Mahadi Hasan Masud & Peter Dabnichki |
2023 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 555 |
Strouhal number analysis for the swimming of little penguin (Eudyptula minor): Proof of efficient underwater propulsion |
Results in Engineering (Elsevier) |
Mahadi Hasan Masud & Peter Dabnichki |
2023 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 556 |
Phase Change Materials in Food Dryers Prospects and Challenges |
Materials Science and Engineering in Food Product Development (Wiley & Sons) |
Hasibul Hasan Himel, Sabit Hasan, Nufile Uddin Ahmed, and Mahadi Hasan Masud |
2023 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 557 |
Sustainable food drying technologies based on renewable energy sources |
Critical Reviews in Food Science and Nutrition (Taylor and Francis) |
Hang Qu, Mahadi Hasan Masud, Majedul Islam, Md Imran Hossen Khan, Anan Ashrabi Ananno, & Azharul Karim |
2022 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 558 |
Feasibility study and optimization of solar-assisted intermittent microwave–convective drying condition for potato |
European Food Research and Technology (Springer) |
Mahadi Hasan Masud, Mohammad U. H. Joardder, Anan Ashrabi Ananno & Shayban Nasif |
2022 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 559 |
Global Electronic Waste Management Current Status and Way Forward |
Paradigm Shift in E-waste Management (CRC Press) |
Mahadi Hasan Masud , Monjur Mourshed, Mosarrat Mahjabeen, Anan Ashrabi Ananno, Peter Dabnichki |
2022 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 560 |
Aerodynamic Performance Analysis of Penguin-Inspired Biomimetic Aircraft Wing |
Green Approaches in Sustainable Aviation (Springer) |
Mahadi Hasan Masud & Peter Dabnichki |
2022 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 561 |
Survey and analysis of consumers’ behaviour for electronic waste management in Bangladesh |
Journal of Environmental Management (Elsevier) |
Anan Ashrabi Ananno, Mahadi Hasan Masud, Peter Dabnichki, Mosarrat Mahjabeen, Sami Ahbab Chowdhury |
2021 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 562 |
Multi-utilisation of Cow Dung as Biomass |
Sustainable Bioconversion of Waste to Value Added Products (Springer) |
Anan Ashrabi Ananno, Mahadi Hasan Masud, Mosarrat Mahjabeen & Peter Dabnichki |
2021 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 563 |
Versatile Applications of Degradable Plastic |
Degradation of Plastics (Materials Research Forum LLC) |
Anan Ashrabi Ananno, Sami Ahbab Chowdhury, Mahadi Hasan Masud, Peter Dabnichki |
2021 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 564 |
Sustainable food waste management model for Bangladesh |
Sustainable Production and Consumption (Elsevier) |
Anan Ashrabi Ananno, Mahadi Hasan Masud, Sami Ahbab Chowdhury, Peter Dabnichki, Nufile Ahmed, Amit Md. Estiaque Arefin |
2021 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 565 |
Mathematical modelling and exergo-environmental analysis of drying potato samples in a waste heat-based convective dryer |
Environmental Challenges (Elsevier) |
Mahadi Hasan Masud, Hasibul Hasan Himel, Amit M.E. Arefin, Anan Ashrabi Ananno, Moshiur Rashid, Peter Dabnichki |
2021 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 566 |
Estimate of Strouhal and Reynolds numbers for swimming penguins |
Journal of Avian Biology (Wiley & Sons) |
M. H. Masud, M. La Mantia, P. Dabnichki |
2021 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 567 |
Sustainable Food Drying Techniques in Developing Countries: Prospects and Challenges |
Springer |
Mahadi Hasan Masud, Azharul Karim, Anan Ashrabi Ananno, and Asif Ahmed |
2020 |
Book |
ME |
Dr. Mahadi Hasan Masud |
| 568 |
Experimental investigation of a novel waste heat based food drying system |
Journal of Food Engineering (Elsevier) |
Mahadi Hasan Masud, Anan Ashrabi Ananno, Nufile Ahmed, Peter Dabnichki, K.N.Salehin |
2020 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 569 |
Renewable energy in Bangladesh: current situation and future prospect |
International Journal of Sustainable Energy (Taylor & Francis) |
Mahadi Hasan Masud, Md Nuruzzaman, Raju Ahmed, Anan Ashrabi Ananno, and A. N. M. Amanullah Tomal |
2020 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 570 |
Design and numerical analysis of a hybrid geothermal PCM flat plate solar collector dryer for developing countries |
Solar Energy (Elsevier) |
A A. Ananno, Mahadi Hasan Masud, Peter Dabnichki, A. Ahmed |
2020 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 571 |
Design and experimental investigation of an internal mixing twin-fluid atomiser for the generation of test aerosol particles |
Australian Journal of Mechanical Engineering (Taylor & Francis) |
Amit M. E. Arefin, Anan Ashrabi Ananno, Mahadi Hasan Masud, Md. Mostafijur Rahman, Monjur Mourshed, Kamrun Nahar & Md. Shamim Akhter |
2020 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 572 |
Development and performance test of an innovative solar derived intermittent microwave convective food dryer |
AIP Conference Proceedings |
Mohammad UH Joardder, Mahadi Hasan Masud, Shayban Nasif, Jakaria Abed Plabon, and Sagit Hasan Chaklader |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 573 |
Performance enhancement of solar PV/T by using glycerin as additive |
AIP Conference Proceedings |
M. Mourshed, P. C. Karmaker, A. Ahmed, and Mahadi Hasan Masud |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 574 |
Food Preservation in Developing Countries: Challenges and Solutions |
Springer |
Mohammad U.H. Joardder, Mahadi Hasan Masud |
2019 |
Book |
ME |
Dr. Mahadi Hasan Masud |
| 575 |
State of Bound Water: Measurement and Significance in Food Processing |
Springer |
Mohammad U.H. Joardder, Monjur Mourshed, Mahadi Hasan Masud |
2019 |
Book |
ME |
Dr. Mahadi Hasan Masud |
| 576 |
CFD analysis of a tube-in-tube heat exchanger to recover waste heat for food drying |
International Journal of Energy and Water Resources (Springer) |
Mahadi Hasan Masud, T. Islam, M. U. H. Joardder, A. A. Ananno & P. Dabnichki |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 577 |
Effect of hysteresis phenomena of cellular plant-based food materials on convection drying kinetics |
Drying Technology (Taylor & Francis) |
Mahadi Hasan Masud, Mohammad U.H. Joardder, and Azharul Karim |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 578 |
Prospects of non-edible neem (Azadirachta indica) oil in Bangladesh: performance and emission evaluation in a direct injection diesel engine |
International Journal of Ambient Energy (Taylor & Francis) |
Wahedul Islam, Monjur Mourshed, Mahadi Hasna Masud, Shariful Islam Sozal,Sifat Bin Sabur |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 579 |
Perspective of biomass energy conversion in Bangladesh |
Clean Technologies and Environmental Policy (Springer) |
Mahadi Hasan Masud, Anan Ashrabi Ananno, Amit M. E. Arefin, Raju Ahamed, Pronob Das, Mohammad U. H. Joardder |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 580 |
Mathematical model of heat transfer and feasibility test of improved cooking stoves in Bangladesh |
International Journal of Ambient Energy (Taylor & Francis) |
Mahadi Hasan Masud, Raju Ahamed, Mohammad U. H. Joardder & Mehide Hasan |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 581 |
Towards the effective E-waste management in Bangladesh: a review |
Environmental Science and Pollution Research (Springer) |
Mahadi Hasan Masud, Wasim Akram, Asif Ahmed, Anan Ashrabi Ananno, Monjur Mourshed, Muntakhimoon Hasan & Mohammad Uzzal Hossain Joardder |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 582 |
Development and performance test of a low-cost hybrid solar air heater |
International Journal of Ambient Energy (Taylor & Francis) |
Mahadi Hasan Masud, Raju Ahamed, M. Mourshed, M. Y. Hossan & M. A. Hossain |
2019 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 583 |
A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus |
International Journal of Advanced Renewable Energy Research |
Uddin, M.S. and Mahadi Hasan Masud |
2018 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 584 |
The Effect of Reynolds No. on the Performance of NACA 2412 |
AIP Conference Proceedings |
Islam, M.T., Arefin, A.M.E., Mahadi Hasan Masud, Mourshed, M. |
2018 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 585 |
Towards a zero-energy based food drying system by utilizing the waste heat |
International Conference on Engineering Research and Education School of Applied sciences & Technology, 25-27 January, SUST, Sylhet, Bangladesh |
Mahadi Hasan Masud , Md. Tariqul Islam, Anan Ashrabi Ananno, Md. Asif Ahmed |
2018 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 586 |
Inhalation risk of indoor aerosol spray products commercially available in Bangladesh |
International Journal of Environmental Studies (Taylor & Francis) |
Mahadi Hasan Masud, Monjur Mourshed, Amit Md. Estiaque Arefin, Md. Tariqul Islam & Md. Shamim Akhter |
2018 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 587 |
Proposal of a solar storage system for plant-based food materials in Bangladesh |
International Journal of Ambient Energy (Taylor & Francis) |
Mohammad U.H. Joardder, Soumya Mandal, Mahadi Hasan Masud |
2018 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 588 |
Design, construction and performance study of a solar assisted Tri-cycle |
PERIODICA POLYTECHNICA MECHANICAL ENGINEERING |
Mahadi Hasan Masud, Md. Shamim Akhter, Sadequl Islam, Abdul Mojid Parvej, Sazzad Mahmud |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 589 |
Design modification of airfoil by integrating sinusoidal leading edge and dimpled surface. |
AIP Conference Proceedings |
Mahadi Hasan Masud, Naim-Ul-Hasan, Arefin, A.M.E. and Joardder, M.U., |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 590 |
Feasibility test on green energy harvesting from physical exercise devices. |
AIP Conference Proceedings |
Mustafi, N.N., Mourshed, M., Mahadi Hasan Masud, Hossain, M.S. and Kamal, |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 591 |
Energy consumption behavior of submersible pumps using in the Barind area of Bangladesh. |
AIP Conference Proceedings |
Haque, M.E., Islam, M.R., Mahadi Hasan Masud, Ferdous, J. and Haniu, H., |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 592 |
Numerical investigation of the stress development in the involute spur gear under static load condition |
AIP Conference Proceedings |
Mourshed, M., Mahadi Hasan Masud, Islam, M.T., |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 593 |
Feasibility of utilizing waste heat in drying of plant-based food materials |
International Conference on Mechanical, Industrial and Materials Engineering, 28-30 December, RUET, Rajshahi, Bangladesh |
Mahadi Hasan Masud, Joardder, M.U.H., Islam, M.T., Hasan, M., Ahmed, M. |
2017 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 594 |
Waste heat recovery systems for internal combustion engines: A review |
1st International Conference on Mechanical Engineering and Applied Science, 20-22 February, At Military Institute of Science and Technology, Dhaka, Bangladesh |
Arefin, A.M.E.,Mahadi Hasan Masud, Joardder, M.U., Mourshed, M., Hasan, N., and Rashid. F., |
2017 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 595 |
Single Degree Motion Control Using Magnetic Levitation System |
1st International Conference on Mechanical Engineering and Applied Science, 20-22 February, Military Institute of Science and Technology, Dhaka, Bangladesh |
Mourshed, M., Rashid, F., Sarker, A., Hoque, M.E. and Masud, M.H., |
2017 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 596 |
Solar Pyrolysis: Converting Waste Into Asset Using Solar Energy |
Elsevier |
M.U.H.Joardder, P.K.Halder, M.A.Rahim, M.H.Masud |
2017 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 597 |
Relationship between Intermittency of Drying, Microstructural Changes, and Food Quality |
Taylor and Fransis (CRC Press) |
Mohammad Uzzal Hossain Joardder, Mahadi Hasan Masud, Azharul Karim |
2017 |
Book Chapter |
ME |
Dr. Mahadi Hasan Masud |
| 598 |
Towards the effective plastic waste management in Bangladesh: a review |
Environmental Science and Pollution Research (Springer) |
Monjur Mourshed, Mahadi Hasan Masud, Fazlur Rashid, Mohammad U.H. Joardder |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 599 |
A monodisperse-aerosol generation system: Design, fabrication and performance |
Particuology (Elsevier) |
Amit Md. EstiaqueArefin, Mahadi Hasan Masud, Mohammad U.H.Joardder, Md. ShamimAkhter |
2017 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 600 |
Design, Construction and Performance Test of a Solar Powered Prototype Vehicle |
nternational Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh |
Uddin, M.S., Mandal, S., Masud, M.H., and Mourshed, M., |
2015 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 601 |
Construction and Performance Study of Underground Assisted Air Heating and Cooling System |
International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh |
Uddin, M.S., Masud, M.H., Mandal, S., and Mourshed, M. |
2015 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 602 |
Purification of TPO (Tire Pyrolytic Oil) and its use in diesel engine |
IOSR Journal of Engineering, 4(3) |
Nabi, A.R., Mahadi Hasan Masud, and Alam, Q.I., |
2014 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 603 |
Design and Construction of a Wind Tunnel with Microcontroller based Isokinetic Probe for Sampling Aerosol Particle. |
Global Journal of Researches in Engineering |
Mahadi Hasan Masud, Noor, M.M. and Akhter, M.S., |
2014 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 604 |
Study of Environmental Impacts of the Barapukuria Thermal Power Plant of Bangladesh |
Global Journal of Researches in Engineering |
Mahadi Hasan Masud, Shakib, M.N. and Rokonuzzaman, M. |
2014 |
Journal |
ME |
Dr. Mahadi Hasan Masud |
| 605 |
Utilization of Waste Plastic to Save the Environment |
International Conference on Mechanical, Industrial and Energy Engineering, 25-26 December, khulna, Bangladesh |
Newaj, N. and Masud, M.H. |
2014 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 606 |
Better Energy Utilization: A Solution of Power Crisis in Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh |
Faroque,O., Mahadi Hasan Masud, Joardder, M.U.H, |
2013 |
Conference |
ME |
Dr. Mahadi Hasan Masud |
| 607 |
Influence of die-pressing pressure on density, porosity, and hardness of ceria and titania doped zirconia toughened alumina fabricated by powder metallurgy process |
7th International Conference on Engineering Research, Innovation, and Education 2023 (ICERIE 2023), School of Applied Sciences & Technology, SUST, Sylhet, Bangladesh. |
• Md. Bakhtierkhalzi, Md. Fayzur Rahman, Fuad Arnob, Md. Wahedul Islam, M. Rafiqul Alam Beg |
2023 |
Conference |
ME |
Md. Bakhtierkhalzi |
| 608 |
Effect of TiO2 as sintering additive on microstructural, physical, and mechanical properties of CeO2 doped zirconia toughened alumina ceramic composite. |
Ceramics International |
Bakhtierkhalzi, Md, Md Wahedul Islam, Md Suzauddin, Md Nurul Islam, and Abdullah Al Mahmood |
2022 |
Journal |
ME |
Md. Bakhtierkhalzi |
| 609 |
Heat and Mass Transfer Model of Dual Porous Samples during Convective Drying |
International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021), Chattogram, Bangladesh |
• Md. Bakhtierkhalzi, A.M. Parvej and Mohammad U.H. Joardder |
2021 |
Conference |
ME |
Md. Bakhtierkhalzi |
| 610 |
Optimization of Link-Based Power Transmission System Designed for an Offset Parallel Shaft Arrangement |
International Conference on Mechanical, Industrial and Materials Engineering |
Oishwarjya Ferdous, Mst Marufa Sultana, Md.Emdadul Hoque |
2019 |
Conference |
ME |
Oishwarjya Ferdous |
| 611 |
IMPLEMENTATION AND ANALYSES OF AN EFFICIENT MULTI-ANGULAR POWER TRANSMISSION ARRANGEMENT BY EMPLOYING KINEMATIC CHAIN JOINT LINKS |
International Conference on Mechanical Engineering and Renewable Energy |
Oishwarjya Ferdous , Mst. Marufa Sultana , Md. Emdadul Hoque |
2019 |
Conference |
ME |
Oishwarjya Ferdous |
| 612 |
AN INVESTIGATION OF THE BEHAVIOR OF MECHANICAL STRUCTURES DUE TO VIBRATION USING ANSYS |
International Conference on Mechanical Engineering and Renewable Energy |
Md. Emdadul Hoque , Shaikh Sumit Noor , Oishwarjya Ferdous and Mst. Marufa Sultana |
2017 |
Conference |
ME |
Oishwarjya Ferdous |
| 613 |
Prospects of solar powered air conditioning systems in Bangladesh and comparative analysis with conventional AC units. |
International Conference on Mechanical, Industrial and Materials Engineering 2017 |
Sami Ahbab Chowdhury, Shaikh Sumit Noor, Emdadul Hoque, Oishwarjya Ferdous |
2017 |
Conference |
ME |
Oishwarjya Ferdous |
| 614 |
Performance analysis of GE LM6000PC gas turbine based on Bangladeshi context; approach to increase the offline water wash cycle interval |
AIP Conference Proceedings |
Mehadi Hassan, Muzaffer Hossain, Md. Kaviul Islam, Mst. Sharifa Khatun, |
2021 |
Journal |
ME |
Mst.Sharifa Khatun |
| 615 |
Waste to energy: An experimental study of utilizing the agricultural residue,MSW, and e-waste available in Bangladesh for pyrolysis conversion |
Heliyon,Elsevier,Vol.7,no. May,p.e08530,2021 |
Md. Kaviul Islam, Mst. Sharifa Khatun, Arman Arefin, Mohammad Rofiqul Islam,Mehadi Hassan |
2021 |
Journal |
ME |
Mst.Sharifa Khatun |
| 616 |
Embodied Energy Calculation of Small-Scale Biogas Plants in Rural Areas of Bangladesh |
Proceedings of International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2019) |
Mehadi Hassan, Md. Kaviul Islam, M.W. Sajib, Mst. Sharifa Khatun |
2019 |
Conference |
ME |
Mst.Sharifa Khatun |
| 617 |
Feasibility study and optimization of solar-assisted intermittent microwave–convective drying condition for potato. |
European Food Research and Technology |
Masud, M. H., Joardder, M. U. H., Ananno, A. A., & Nasif, S. |
2022 |
Journal |
ME |
Dr. Mohammad U. H. Joardder |
| 618 |
Heat and Mass Transfer Modelling During Drying: Empirical to Multiscale Approaches |
CRC Press |
Joardder, M.U.H., Akram, W., & Karim, A. |
2021 |
Book |
ME |
Dr. Mohammad U. H. Joardder |
| 619 |
Dr. Joardder's journal articles can be found from this link |
Peer Reviewed |
Joardder et. al. |
2020 |
Journal |
ME |
Dr. Mohammad U. H. Joardder |
| 620 |
State of Bound Water: Measurement and Significance in Food Processing |
Springer |
Joardder, Mohammad U.H., Mourshed, Monjur, Hasan Masud, Mahadi |
2019 |
Book |
ME |
Dr. Mohammad U. H. Joardder |
| 621 |
Food preservation in developing countries: Challenges and solution |
Springer |
Joardder, Mohammad U.H., Hasan Masud, Mahadi |
2019 |
Book |
ME |
Dr. Mohammad U. H. Joardder |
| 622 |
Porosity : establishing the relationship between drying parameters and dried food quality |
Springer |
Mohammad U H Joardder; Azharul Karim; Chandan Kumar; Richard J Brown |
2016 |
Book |
ME |
Dr. Mohammad U. H. Joardder |
| 623 |
Approaches for Sensor Surfaces Modification |
Springer, Cham. |
Kamal, M.M., Haque, M.J. |
2024 |
Book Chapter |
ME |
Md. Mostafa Kamal |
| 624 |
Investigation of Physical and Mechanical Properties of Porous LaMnO3 Prepared with Corn Flour |
14th International Conference on Mechanical Engineering December 18-19, 2023 |
Md. Mostafa Kamal, Mir Imran Bin Samad , Md. Nurul Islam, AKM Asif Iqbal |
2023 |
Conference |
ME |
Md. Mostafa Kamal |
| 625 |
Anaerobic Digestion Process of Biomass |
Reference Module in Earth Systems and Environmental Sciences, Elsevier |
Monjur Mourshed, Mostafa Kamal, Nahid I. Masuk, Sami A. Chowdhury, Mahadi H. Masud |
2023 |
Book Chapter |
ME |
Md. Mostafa Kamal |
| 626 |
Development of a Low-Cost Compression Device for Ceramics Materials |
International Conference on Mechanical, Industrial and Energy Engineering 2022, 22-24 December, 2022, Khulna, BANGLADESH |
Kamal, M. M., Samad, M. I. B., Islam, M. N. |
2022 |
Conference |
ME |
Md. Mostafa Kamal |
| 627 |
A sustainable energy approach for pumping and irrigation in the Barind Region of Bangladesh |
Journal of Clean Technologies and Environmental Policy (Springer Nature, Q1, Impact factor: 4.3, Volume 25, Issue 10, Pp (1-30) |
Md. Sanowar Hossain, Miftahul Mobin Chowdhury, Barun K. Das, Mohammad Rofiqul Islam, Md. Golam Kibria & Sujan Banik |
2024 |
Journal |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 628 |
Design and Numerical Analysis of a Thermal Energy Storage with Encapsulated Eutectic Phase Change Material for Heat Energy Storing Applications Using Polyethylene Glycol and Na2SO4.10H20 (Glauber Sault) |
14th International Conference on Mechanical Engineering (ICME,BUET -2023) (18th-19th December, 2023) |
Chowdhury, Miftahul Mobin; Akash, MTH; Rahman, SF; Sadid, Muhammad Sammam; Kayes, Md. Imrul; Sadid, Mustafi, Nirendra Nath |
2023 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 629 |
Sustainable Solar Irrigation in the northern and southern region of Bangladesh: A Techno-Economic Assessment and Future Prospects |
14th International Conference on Mechanical Engineering (ICME,BUET -2023) (18th-19th December, 2023) |
Chowdhury, Miftahul Mobin; Akash, MTH; Rahman, SF; Sadid, Muhammad Sammam; Kayes, Md. Imrul; Hossain, Md. Sanowar; Mustafi, Nirendra Nath |
2023 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 630 |
Comparative Numerical Analysis of Square and Hexagonal Cross-Section Heat Exchangers for Exhaust Heat Recovery of Internal Combustion Engine |
7th International Conference on Mechanical Engineering and Renewable Energy, ICMERE 2023 (16th-17th November, 2023) |
Akash, MTH; Rahman, SF; Chowdhury, Miftahul Mobin; Mustafi, Nirendra Nath |
2023 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 631 |
The Role of Wind Power in Bangladesh's Renewable Energy Portfolio: Opportunities, Challenges & Future Recommendation |
7th International Conference on Mechanical Engineering and Renewable Energy, ICMERE 2023 (16th-17th November, 2023) |
Rahman, SF; Akash, MTH; Chowdhury, Miftahul Mobin; Mustafi, Nirendra Nath |
2023 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 632 |
Theoretical estimation of energy potential and environmental emissions mitigation for major livestock manure in Bangladesh |
Journal of Renewable Energy (Elsevier, Q1, Impact Factor: 8.7, Volume 217, Pages 119354) |
Md. Sanowar Hossain, Nahid Imtiaz Masuk, Barun K. Das, Arnob Das, Golam Kibria, Miftahul Mobin Chowdhury, Imtiaz Ahmed Shozib |
2023 |
Journal |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 633 |
Techno-economic evaluation of a stand-alone renewable energy based sustainable water treatment plant in the northern region of Bangladesh to meet the current fresh water demand: Potentials, Challenges and Socio-technical consequences |
7th International Conference on Engineering Research, Innovation, and Education: ICERIE 2023: Shahjalal University of Science and Technology, Sylhet, Bangladesh. |
Chowdhury, Miftahul Mobin; Kayes, Md. Imrul; Sadid, Muhammad Sammam |
2023 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 634 |
Design, Simulation and Experimental Validation of a Minor Flow Channel Based Virtual Impactor to Generate Mono-Disperse Aerosols |
7th International Conference on Mechanical, Industrial and Energy Engineering, ICMIEE 2022 22-24 December, 2022, KUET, Khulna, BANGLADESH |
Chowdhury, Miftahul Mobin; Kayes, Md Imrul; Sadid, Muhammad Sammam |
2022 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 635 |
Design and Numerical Study of a Minor Flow Channel Based Virtual Impactor as Mono-disperse Aerosol Generator and a Comparative Study of The Current Technologies for Aerosol Generation |
5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022)- 20-22 December, 2022, RUET, Rajshahi-6204, Bangladesh |
Chowdhury, Miftahul Mobin; Kayes, Md Imrul; Sadid, Muhammad Sammam |
2022 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 636 |
Solar Home Systems (SHS) in the Context of Bangladesh: An Assessment of Rooftop PV Systems for Net Energy Metering Options |
5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022)- 20-22 December, 2022, RUET, Rajshahi-6204, Bangladesh |
Chowdhury, Miftahul Mobin; Kayes, Md Imrul; Sadid, Muhammad Sammam |
2022 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 637 |
Techno-economic Evaluation of Sustainable Solar Irrigation in Northern Region of Bangladesh |
5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022)- 20-22 December, 2022, RUET, Rajshahi-6204, Bangladesh |
Chowdhury, Miftahul Mobin; Kayes, Md Imrul; Sadid, Muhammad Sammam |
2022 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 638 |
Design And Simulation of A Thermal Energy Storage With Encapsulated EPCMs Made of Polyurethane And Na2SO4 .6H2O To Make A Comparison With Different Organic, Inorganic And Eutectic phase change materials For Heat Storage Applications |
5th International Conference on Mechanical, Industrial and Materials Engineering 2022 (ICMIME 2022)- 20-22 December, 2022, RUET, Rajshahi-6204, Bangladesh |
Chowdhury, Miftahul Mobin; Mustafi, Nirendra Nath; Kayes, Md Imrul; Sadid, Muhammad Sammam |
2022 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 639 |
Design, Simulation and Comparative Study of Virtual Impactors for The Generation of Mono-disperse Aerosols |
4th International Conference on Mechanical, Industrial and Materials Engineering, ICMIME, 17-19 December, 2019, RUET, Rajshahi, Bangladesh |
Md. Nahid Hossan, Miftahul Mobin Chowdhury, Md. Shamim Akhter |
2019 |
Conference |
ME |
Miftahul Mobin Chowdhury Shabdik |
| 640 |
Investigation of a reliable and sustainable stand-alone hybrid energy system for freshwater supply: a case study |
International Journal of Sustainable Energy (Taylor & Francis) |
Das, Pronob; Das, Barun K; Islam, MS; Rahman, Mushfiqur; Hassan, Rakibul; Shuvo, Kumar Abir |
2023 |
Journal |
ME |
Dr. Barun Kumar Das |
| 641 |
A Comprehensive Review on Recent Advancements in Absorption-Based Post Combustion Carbon Capture Technologies to Obtain a Sustainable Energy Sector with Clean Environment |
Sustainability (Impact Factor: 3.889) |
Peu, Susmita Datta; Das, Arnob; Hossain, Md Sanowar; Akanda, Md Abdul Mannan; Akanda, Md Muzaffer Hosen; Rahman, Mahbubur; Miah, Md Naim; Das, Barun K; Islam, Abu Reza Md Towfiqul; Salah, Mostafa M |
2023 |
Journal |
ME |
Dr. Barun Kumar Das |
| 642 |
Metal Oxide Nanosheet: Synthesis Approaches and Applications in Energy Storage Devices (Batteries, Fuel Cells, and Supercapacitors) |
Nanomaterials (Impact Factor: 5.719) |
Das, Arnob; Peu, Susmita Datta; Hossain, Md Sanowar; Akanda, Md Abdul Mannan; Salah, Mostafa M; Akanda, Md Muzaffer Hosen; Rahman, Mahbubur; Das, Barun K |
2023 |
Journal |
ME |
Dr. Barun Kumar Das |
| 643 |
Numerical Simulation and Optimization of Inorganic Lead-Free Cs3Bi2I9-Based Perovskite Photovoltaic Cell: Impact of Various Design Parameters |
Energies (Impact Factor: 3.252) |
Das, Arnob; Peu, Susmita Datta; Akanda, Md Abdul Mannan; Salah, Mostafa M; Hossain, Md Sejan; Das, Barun Kumar |
2023 |
Journal |
ME |
Dr. Barun Kumar Das |
| 644 |
Evaluating the prospect of utilizing excess energy and creating employments from a hybrid energy system meeting electricity and freshwater demands using multi-objective evolutionary algorithms |
Energy, 238, Part B, 121860 (Elsevier, Impact Factor: 8.857) |
Das, Pronob; Das, Barun K.; Rahman, Mushfiqur; Hassan, Rakibul |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 645 |
Investigation of a hybrid renewable-based grid-independent electricity-heat nexus: Impacts of recovery and thermally storing waste heat and electricity |
Energy Conversion and Management, 115073. (Elsevier, Impact Factor: 11.533). |
Hassan, Rakibul; Das, Barun K.; Al-Abdeli, Yasir M. |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 646 |
Investigation of a modified double slope solar still integrated with nanoparticle-mixed phase change materials: Energy, exergy, exergo-economic, environmental, and sustainability analyses |
Case Studies in Thermal Engineering, 37, 102256 (Elsevier, Q1, Impact Factor: 6.268) |
Tuly, S.S.; Islam, M.S.; Hassan, Rakibul; Das, Barun K.; Sarker, M.R.I. |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 647 |
Renewable energy as a source of electricity for Murzuq health clinic during COVID-19 |
MRS Energy & Sustainability |
Beitelmal, Wesam H ; Okonkwo, Paul C; Housni, Fadhil Al; Grami, Said; Emori, Wilfred; Uzoma, Paul C ; Das, Barun K. |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 648 |
Investigating the energetic, exergetic, and sustainability aspects of a solar still integrating fins, wick, phase change materials, and external condenser |
Journal of Energy Storage (Elsevier, Q1, Impact Factor: 8.907) |
Tuly, S.S.; Hassan, Rakibul; Das, Barun K.; Sarker, M.R.I. |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 649 |
A hybrid renewable-based solution to electricity and freshwater problems in the off-grid Sundarbans region of India: Optimum sizing and socio-enviro-economic evaluation |
Journal of Cleaner Production, 133761 (Elsevier, Impact Factor: 11.072). |
Roy, Dibyendu; Hassan, Rakibul; Das, Barun K. |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 650 |
Performance investigation of active double slope solar stills incorporating internal sidewall reflector, hollow circular fins, and nanoparticle-mixed phase change material |
Journal of Energy Storage (Elsevier, Q1, Impact Factor: 8.907) |
Tuly, S.S.; Ayon, A.B.S.; Hassan, Rakibul; Das, Barun K.; Khan, R.H.; Sarker, M.R.I. |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 651 |
Influence of energy management strategies and storage devices on the techno-enviro-economic optimization of hybrid energy systems: A case study in Western Australia |
Journal of Energy Storage (Elsevier, Impact Factor: 8.907) |
Das, Barun K.; Hassan, Rakibul; Islam, Md Saiful; Rezaei, Mostafa; |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 652 |
Integrated off-grid hybrid renewable energy system optimization based on economic, environmental, and social factors for sustainable development |
Energy (Elsevier, Impact Factor: 8.857) |
Hassan, Rakibul; Das, Barun K; Hasan, Mahmudul |
2022 |
Journal |
ME |
Dr. Barun Kumar Das |
| 653 |
Techno-economic Optimization of a Zero Emission Energy System for a Coastal Community in Newfoundland, Canada |
Energy, 119709. (Elsevier, Impact Factor: 8.857). |
Saiful MS; Das, Barun K.; Das Pronob; Rahaman, MH |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 654 |
A Review on Pump‐hydro Storage for Renewable and Hybrid Energy Systems Applications |
Energy Storage (Wiley Online Library) |
Pronob Das; Barun K. Das; Nirendra N. Mustafi; Md. Takmil Sakir |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 655 |
Optimal sizing of a grid-independent PV/diesel/pump-hydro hybrid system: A case study in Bangladesh |
Sustainable Energy Technologies and Assessments (Elsevier, Impact Factor: 7.632) |
Das, Barun K; Hasan, Mahmudul; Rashid, Fazlur |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 656 |
Techno-economic and environmental assessment of a hybrid renewable energy system using multi-objective genetic algorithm: A case study for remote Island in Bangladesh |
Energy Conversion and Management, 230. (Elsevier, Impact Factor: 11.533). |
Das, Barun K.; Hassan, Rakibul;Tushar, Mohammad Shahed H.K.; Zaman, Forhad; Hasan, Mahmudul; Das, Pronob |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 657 |
Techno-economic optimisation of stand-alone hybrid renewable energy systems for concurrently meeting electric and heating demand |
Sustainable Cities and Society. Vol 68, 102763 (Elsevier, Impact Factor: 10.696) |
Das, Barun K.; Tushar, Mohammad Shahed H.K.; Hassan, Rakibul; |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 658 |
Optimal sizing of a stand-alone hybrid system for electric and thermal loads using excess energy and waste heat |
Energy, 214; 119036. (Elsevier, Impact Factor: 8.857). |
Das, Barun K., Hasan, Mahmudul |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 659 |
Techno-economic feasibility and size optimisation of an off-grid hybrid system for supplying electricity and thermal loads |
Energy, 215, Part A, 119141 (Elsevier, Impact Factor: 8.857). |
Das, Barun K., Tushar, MSHK, and Zaman, F. |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 660 |
Integrating renewables into stand-alone hybrid systems meeting electric, heating, and cooling loads: A case study |
Renewable Energy 180, p 1222-1236 (Elsevier, Impact Factor: 8.634) |
Das, Barun K.; Al-Abdeli, Yasir M. ; Kothapalli, Ganesh |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 661 |
Energy, exergy, exergo-environmental, and exergetic sustainability analyses of a gas engine-based CHP system |
Energy Science & Engineering (Wiley Online Library, Impact Factor: 4.17) |
Hassan, Rakibul; Barua, Hridoy; Das, Barun K. |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 662 |
Impact of storage technologies, temporal resolution, and PV tracking on stand-alone hybrid renewable energy for an Australian remote area application |
Renewable Energy (Elsevier, Impact Factor: 8.634) |
Das, Barun K.; Hasan, Mahmudul; Das, Pronob |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 663 |
Feasibility and techno-economic analysis of stand-alone and grid-connected PV/Wind/Diesel/Batt hybrid energy system: A case study |
Energy Strategy Reviews (Elsevier, Impact Factor: 10.01) |
Das, Barun K.; Alotaibi, Majed A.; Das, Pronob; Islam, M.S.; Das, Sajal K.; Hossain, Md Alamgir; |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 664 |
Effects of different environmental and operational factors on the PV performance: A comprehensive review |
Energy Science & Engineering (Wiley Online Library, Impact Factor: 4.17) |
Hasan, Khaled; Yousuf, Sumaiya Binty; Tushar, Mohammad Shahed Hasan Khan; Das, Barun K.; Das, Pronob; Islam, Md. Saiful |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 665 |
Effects of Design and Operational Parameters on the Performance of a Solar Distillation System: A Comprehensive Review |
Groundwater for Sustainable Development (Elsevier) |
Tuly, S.S.; Sarker, M.R.I.; Das, Barun K.; Rahman, M.S. |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 666 |
Investigating the impact of economic uncertainty on optimal sizing of grid-Independent hybrid renewable energy systems |
Processes, 2227-9717 (Impact Factor: 3.352) |
Rezaei, Mostafa; Dampage, Udaya; Das, Barun K.; Nafis, Omaima; Borowski, Piotr F.; Mohamed, Mohamed A.; |
2021 |
Journal |
ME |
Dr. Barun Kumar Das |
| 667 |
Optimal Sizing of Stand-alone and Grid-connected Solar PV Systems in Bangladesh |
International Journal of Energy for a Clean Environment, p:107-124 |
Das, Barun K. |
2020 |
Journal |
ME |
Dr. Barun Kumar Das |
| 668 |
Performance analysis of a PV/Diesel hybrid system for a remote area in Bangladesh: Effects of dispatch strategies, batteries, and generator selection. |
Energy, 169, 263-276 (Elsevier, Impact Factor: 8.857). |
Das, Barun K., and Zaman, F. |
2019 |
Journal |
ME |
Dr. Barun Kumar Das |
| 669 |
Effects of battery technology and load scalability on stand-alone PV/ICE hybrid micro-grid system performance. |
Energy, 168, 57-69 (Elsevier, Impact Factor: 8.857). |
Das, Barun. K., Al-Abdeli, Y. M., and Woolridge, M. |
2019 |
Journal |
ME |
Dr. Barun Kumar Das |
| 670 |
Optimum sizing of a stand-alone hybrid system for rural area application in Bangladesh. |
Journal of Cleaner Production, 200, p. 12-27. (Elsevier, Impact Factor: 11.072). |
Mandal, Soumya., Das, Barun K., and Hoque, Najmul. |
2018 |
Journal |
ME |
Dr. Barun Kumar Das |
| 671 |
Effect of load following strategies, hardware, and thermal load distribution on stand-alone hybrid CCHP systems. |
Applied Energy, 220, p. 735-753. (Elsevier, Impact Factor: 11.446) |
Das, Barun K., Al-Abdeli, Yasir M., and Kothapalli, Ganesh, |
2018 |
Journal |
ME |
Dr. Barun Kumar Das |
| 672 |
Optimisation of stand-alone hybrid CHP systems meeting electric and heating loads. |
Energy Conversion and Management, 153, p. 391-408. (Elsevier, Impact Factor: 11.533). |
Das, Barun K., and Al-Abdeli, Yasir M. |
2017 |
Journal |
ME |
Dr. Barun Kumar Das |
| 673 |
Optimisation of stand-alone hybrid energy systems supplemented by combustion-based prime movers |
Applied Energy, 196, p. 18-33. (Elsevier, Impact Factor: 11.446) |
Das, Barun K., Al-Abdeli, Yasir M., and Kothapalli, Ganesh |
2017 |
Journal |
ME |
Dr. Barun Kumar Das |
| 674 |
A techno-economic feasibility of a stand-alone hybrid power generation for remote area application in Bangladesh |
Energy, 134: p. 775-788. (Elsevier, Impact Factor: 8.857). |
Das, Barun K., et al. |
2017 |
Journal |
ME |
Dr. Barun Kumar Das |
| 675 |
Evaluation of Energy Payback and CO2 Emission of Solar Home Systems in Bangladesh. |
Procedia Engineering (Elsevier), 90, 2014, Pages 675-679. |
Hoque, S.M. Najmul., Das, Barun K., and Beg, Mohd. Rafiqul Alam., |
2014 |
Journal |
ME |
Dr. Barun Kumar Das |
| 676 |
Assessment of the Potential of Biomass Gasification for Electricity Generation in Bangladesh. |
Journal of Renewable Energy, 2014, |
Das, Barun K., and Hoque, S.M. Najmul., |
2014 |
Journal |
ME |
Dr. Barun Kumar Das |
| 677 |
Present Status of Solar Home and PV Micro Utility Systems in Bangladesh and Recommendation for Further Expansion and Upgrading for Rural Electrification. |
Journal of renewable and sustainable Energy (AIP). Volume 5, 042301, 2013. IF=2.219. |
Hoque, S.M. Najmul., and Das, Barun K., |
2013 |
Journal |
ME |
Dr. Barun Kumar Das |
| 678 |
Analysis of Cost, Energy and CO2 Emission of Solar Home Systems in Bangladesh. |
International Journal of Renewable Energy Research (IJRER). Volume 3, Issue 2, 2013. |
Hoque, S.M. Najmul., and Das, Barun K. |
2013 |
Journal |
ME |
Dr. Barun Kumar Das |
| 679 |
Development of a vacuum double-slope solar still for enhanced freshwater productivity |
Solar Energy (Elsevier) |
Sumon Saha, Md. Rabiul Islam Sarker, Md. Abdul Kader, Mim Mashrur Ahmed, Sumaiya Sadika Tuly and Nirendra Nath Mustafi |
2024 |
Journal |
ME |
Mim Mashrur Ahmed |
| 680 |
Energy management and sizing of a stand-alone hybrid renewable energy system for community electricity, fresh water, and cooking gas demands of a remote island |
Energy Conversion and Management (Elsevier) |
Mim Mashrur Ahmed, Barun K. Das, Pronob Das, Md Sanowar Hossain and Md Golam Kibria |
2024 |
Journal |
ME |
Mim Mashrur Ahmed |
| 681 |
Prospect of waste-to-energy technologies in selected regions of lower and lower-middle-income countries of the world |
Journal of Cleaner Production (Elsevier) |
Mim Mashrur Ahmed, Md. Nahid Hossan and Mahadi Hasan Masud |
2024 |
Journal |
ME |
Mim Mashrur Ahmed |
| 682 |
Methanol Production From Municipal Solid Waste |
Reference Module in Chemistry, Molecular Sciences and Chemical Engineering (Elsevier) |
Mim Mashrur Ahmed, Gazi Arman Hossain, Abu Kaisar Md Faisal, Anan Ashrabi Ananno, Moshiur Rashid and Mahadi Hasan Masud |
2024 |
Book Chapter |
ME |
Mim Mashrur Ahmed |
| 683 |
Methanol Production From Biogas: Current Status and Future Prospects |
Reference Module in Chemistry, Molecular Sciences and Chemical Engineering (Elsevier) |
Md. Nahid Hossan, Mim Mashrur Ahmed, Milind Siddhpura, Anan Ashrabi Ananno and Mahadi Hasan Masud |
2023 |
Book Chapter |
ME |
Mim Mashrur Ahmed |
| 684 |
Domestic Waste To Energy, Technologies, Economics, and Challenges |
Reference Module in Earth Systems and Environmental Sciences (Elsevier) |
Mahadi H. Masud, Moshiur Rashid, Md. Nahid Hossan and Mim M. Ahmed |
2023 |
Book Chapter |
ME |
Mim Mashrur Ahmed |
| 685 |
Design and optimization of a hybrid energy system for sustainable development at rural areas in Bangladesh |
AIP Conference Proceedings |
Md Emdadul Hoque, Nazmus Sakib, Firoz Alam, Mim Mashrur Ahmed, Fazlur Rashid, Arifur Rahman and Somnath Chattopadhyaya |
2022 |
Conference |
ME |
Mim Mashrur Ahmed |
| 686 |
Health Condition Monitoring and Control of Vibrations of a Rotating System through Vibration Analysis |
Journal of Sensors (Hindawi) |
Arifur Rahman, Md. Emdadul Hoque, Fazlur Rashid, Firoz Alam and Mim Mashrur Ahmed |
2022 |
Journal |
ME |
Mim Mashrur Ahmed |
| 687 |
Prediction of COVID-19 Cases from the Nexus of Air Quality and Meteorological Phenomena: Bangladesh Perspective |
Earth Systems and Environment (Springer) |
Mim Mashrur Ahmed, Md. Emdadul Hoque, Shahanaj Rahman, Proshanta Kumar Roy, Firoz Alam, Muhammad Mustafizur Rahman, Md. Mostafizur Rahman and Philip K. Hopke |
2022 |
Journal |
ME |
Mim Mashrur Ahmed |
| 688 |
Municipal Solid Waste Management and Waste-to-Energy Potential from Rajshahi City Corporation in Bangladesh |
Applied Sciences (MDPI) |
Md. Ahasan Habib, Mim Mashrur Ahmed, Muhammad Aziz, Mohd. Rafiqul Alam Beg and Md. Emdadul Hoque |
2021 |
Journal |
ME |
Mim Mashrur Ahmed |
| 689 |
Condition Monitoring of an Automobile IC Engine and Gearbox through Used Oil Analysis |
International Conference on Mechanical, Industrial and Energy Engineering, 19-21 December, 2020, Khulna, Bangladesh |
Md. Emdadul Hoque, Mim Mashrur Ahmed, Anisur Rahman1 and Dip Kumar Saha |
2020 |
Conference |
ME |
Mim Mashrur Ahmed |
| 690 |
Concentrating technologies with reactor integration and effect of process variables on solar assisted pyrolysis: A critical review |
Thermal Science and Engineering Progress (Elsevier) |
MA Rahman, Abdul Mojid Parvej, Mohammad Abdul Aziz |
2021 |
Journal |
ME |
Abdul mojid parvej |
| 691 |
Design, construction and performance study of a solar assisted tri-cycle |
Periodica Polytechnica Mechanical Engineering |
Mahadi Hasan Masud, Md Shamim Akhter, Sadequl Islam, Abdul Mojid Parvej, Sazzad Mahmud |
2017 |
Journal |
ME |
Abdul mojid parvej |
| 692 |
Impact of various environmental parameters and production enhancement techniques on direct solar still: A review |
Solar Energy Volume 267, 1 January 2024, 112216 |
Shithi Dey Kanka, Md. Golam Kibria, Usma Atiua Anika , Barun K. Das , Md. Sanowar Hossain , Dibyendu Roy , Md. Shahriar Mohtasim |
2024 |
Journal |
ME |
Md. Golam Kibria |
| 693 |
A Sustainable Energy Approach for Pumping and Irrigation in the Barind Region of Bangladesh |
Clean Technologies and Environmental Policy |
Md. Sanowar Hossain, Miftahul Mobin Chowdhury, Barun K. Das, Mohammad Rofiqul Islam, Md. Golam Kibria, Sujan Banik |
2024 |
Journal |
ME |
Md. Golam Kibria |
| 694 |
Impact of hybrid nano PCM (paraffin wax with Al2O3 and ZnO nanoparticles) on photovoltaic thermal system: Energy, exergy, exergoeconomic and enviroeconomic analysis |
Journal of Cleaner Production Available online 3 January 2024, 140577 |
Md Golam Kibria, Md Shahriar Mohtasim, Utpol K. Paul, Barun K. Das, R. Saidur |
2024 |
Journal |
ME |
Md. Golam Kibria |
| 695 |
Energy management and sizing of a stand-alone hybrid renewable energy system for community electricity, fresh water, and cooking gas demands of a remote island |
Journal- Energy Conversion and Management ;Volume 299; Pages 117865; Publisher Elsevier |
Mim Mashrur Ahmed, Barun K. Das, Pronob Das, Md Sanowar Hossain, Md Golam Kibria |
2024 |
Journal |
ME |
Md. Golam Kibria |
| 696 |
Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management |
International Journal of Environmental Research, Springer |
Md. Golam Kibria, Nahid Imtiaz Masuk, Rafat Safayet, Huy Quoc Nguyen & Monjur Mourshed |
2023 |
Journal |
ME |
Md. Golam Kibria |
| 697 |
Effect of Discharge current on the capacity of lead acid battery |
7 th International Conference on Engineering Research, Innovation and Education, ICERIE-2023. |
Md Kamrul Hasan and Md.Golam Kibria |
2023 |
Conference |
ME |
Md. Golam Kibria |
| 698 |
Theoretical estimation of energy potential and environmental emissions mitigation for major livestock manure in Bangladesh |
ELSEVIER, Renewable Energy Volume 217, November 2023, 119354 |
Md. Sanowar Hossain ,Nahid Imtiaz Masuk , Barun K. Das, Arnob Das , Md. Golam Kibria , Miftahul Mobin Chowdhury , Imtiaz Ahmed Shozib |
2023 |
Journal |
ME |
Md. Golam Kibria |
| 699 |
Experimental Investigation of a PVT System Using PCM |
International Conference on Mechanical, Industrial and Energy Engineering 2022 22-24 December, 2022, Khulna, BANGLADESH |
Md. Golam Kibria,* , Sakin Mahamud , N. M. Morshedul Hoque , Asma-UL-Husna, Md Rabiul Islam Sarker , Mohd. Rafiqul Alam Beg |
2022 |
Conference |
ME |
Md. Golam Kibria |
| 700 |
Numerical & experimental evaluation of the performance of Celdek as a cooling pad material |
International Conference on Mechanical Engineering and Renewable Energy 2021 Chittagong University of Engineering & Technology (CUET) Chattogram, Bangladesh, December 12-14, 2021 |
Md. Afraim Al Hasan, Md. Golam Kibria and Mohammad U.H. Joardder (Omar) |
2021 |
Conference |
ME |
Md. Golam Kibria |
| 701 |
Design, Fabrication and Performance Analysis of a Voice Coil Motor Using Different Input Signal |
2019 IEEE International Conference on Signal Processing, Information, Communication & Systems (SPICSCON) |
M. G. Kibria, F. Rashid, M. Shahadat |
2019 |
Conference |
ME |
Md. Golam Kibria |
| 702 |
Production and characterization of pyrolytic oil derived from co-pyrolysis of solid polythene waste and saw dust |
Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11 – 13 December, 2019, Chittagong, Bangladesh |
M. S. Hossain, M.G. kibria, A.M. Parvej, M.R. Islam |
2019 |
Conference |
ME |
Md. Golam Kibria |
| 703 |
Assessment of Biogas Generation From Cattle Dung In Bangladesh |
Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11 – 13 December, 2019, Chittagong, Bangladesh |
M.G. Kibria, B.K. Das, R.A. Beg, A. Chakravartty |
2019 |
Conference |
ME |
Md. Golam Kibria |
| 704 |
Leaf Spring for Light Vehicle: Comparison Among Conventional Steel, Composite Materials (Epoxy-E Carbon & Epoxy-E Glass) By Anays Workbench |
International Conference on Mechanical, Industrial and Materials Engineering 2019 (ICMIME2019) 17-19 December, 2019, RUET, Rajshahi, Bangladesh. |
Md. Golam Kibria, Prosenzit Kumar, Md. Sanowar Hossain, Md. Arman Arefin |
2019 |
Conference |
ME |
Md. Golam Kibria |
| 705 |
Performance Analysis of a Fabricated Distinct Voice Coil Motor |
International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh. |
Mhia Md Zaglul Shahadat, Md Golam Kibria, Md Monnaf Ali |
2017 |
Conference |
ME |
Md. Golam Kibria |
| 706 |
Domestic Waste to Energy, Technologies, Economics, and Challenges |
Reference Module in Earth Systems and Environmental Sciences. Elsevier |
Mahadi H. Masud, Moshiur Rashid, Md. Nahid Hossan, Mim M. Ahmed |
2023 |
Book Chapter |
ME |
Md. Nahid Hossan |
| 707 |
Methanol Production From Biogas: Current Status and Future Prospects |
Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, Elsevier |
Md. Nahid Hossan, Mim Mashrur Ahmed, Milind Siddhpura, Anan Ashrabi Ananno, Mahadi Hasan Masud |
2023 |
Book Chapter |
ME |
Md. Nahid Hossan |
| 708 |
Heat Transfer Analysis of Supercritical CO2 in a High-Speed Turbine Rotor Shaft Cooling Passage |
Journal of Thermal Science and Engineering Progress |
Md. Uddin, Halim Gurgenci, Alex Klimenko and Zhiqiang Guan |
2023 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 709 |
Pressure Profile and Stiffness Analysis of Supercritical CO2 Inside a Rotating Annulus Cooling Passage Using CFD |
Journal of Tribology (JSME), 145(11): 114102 |
Md. Uddin, Halim Gurgenci, and Zhiqiang Guan |
2023 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 710 |
Structural analysis and material selection for biocompatible cantilever beam in soft robotic nanomanipulator |
Bibechana Journal |
Md. Uddin, Md. Imran Khan, Sadman Bin Shafiq, Shahriar Sadik, Md. Sohel Rana, Khaled Mohammad Shifullah Bhuiya, Sabbir Ahmed Udoy, Md. Khalid Hasan Rafi |
2023 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 711 |
Energy Analysis and Energy Saving Potential of an Apparel Production in Bangladesh |
ICME 2023, Bangladesh |
Md. Uddin, K. M. Shifullah Bhuiya, Sabbir Ahmed Udoy, Md Abu Sakib Mozumder, Sadia Mortuza, Md Mostafizar Rahman Rony and Abdul Mojid Parvej |
2023 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 712 |
Viscous Dissipation of Supercritical CO2 Turbulent Flow through the Rotating Annulus |
ICMIME 2022 |
Md Uddin, Alex Klimenko and Zhiqiang Guan |
2022 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 713 |
Super-critical CO2 Behavior in a Concentric Annulus Based on Ideal Gas and Real Gas Properties |
Australian Combustion Symposium, 21-23 Nov, Toowoomba, QLD |
Md. Uddin, H. Gurgenci, A. Klimenko and Z. Guan |
2021 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 714 |
Supercritical CO2 Turbulent Flow and Heat Transfer Behavior in a Concentric Rotating Annulus |
Australian Combustion Symposium, 21-23 Nov, Toowoomba, QLD |
Md. Uddin, H. Gurgenci, A. Klimenko and Z. Guan |
2021 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 715 |
Design a Cooling Pillow to Support a High-Speed Supercritical CO2 Turbine Shaft |
Applied Thermal Engineering |
Md. Uddin, H. Gurgenci, Z. Guan, A. Klimenko, J. Li, J. Li, L. Li |
2021 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 716 |
Energy and Environmental Benefit of Solar Charging System for Charging Auto-rickshaw in Developing Countries |
The Global Environmental Engineers |
Md. Uddin, A.Z.M. Rahman and Sumon Mondol |
2021 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 717 |
BEARING AND SEAL SELECTION FOR A HIGH-TEMPERATURE SUPERCRITICAL CO2 TURBINE |
Proceedings of Global Power and Propulsion Society (Beijing Conference) |
Jishun Li, Hal Gurgenci, Zhiqiang Guan, Jun Li, Md. Shazib Uddin, Lun Li |
2019 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 718 |
Household Energy and Environmental Analysis to Highlight the Impact of Modern Energy Access in Bangladesh |
Taylor and Francis Group |
Md. Shazib Uddin, SK Shamim Iqbal and Md. Talukdar |
2017 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 719 |
Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh |
Journal of Nature Science and Sustainable Technology |
Md. Shazib Uddin, Soumya Mondal and Md. Fajle Rabbi |
2017 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 720 |
Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December |
Md. Shazib Uddin, Md. Saiful Islam, Fazlur Rashid, A.Z.M.Waliur Rahman and Sumon Kumar Mondol |
2017 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 721 |
Design And Construction of a Light Weight User Friendly Travelling Mosquito Net |
Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18 – 20 December |
Md. Shazib Uddin, Md. Saiful Islam, Nazmus Sadat and Sharmin Saika |
2017 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 722 |
Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December |
Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque |
2017 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 723 |
Assessment of Energy Security Snapshot in Developing Country Bangladesh |
Journal of Environmental Science, Toxicology and Food Technology |
Md. Shazib Uddin, A. N. Faisal Ahmed, Sayeed Ahmmed |
2016 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 724 |
A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus |
International Journal of Advanced Renewable Energy Research |
Md. Shazib Uddin and Mahadi Hasan Masud |
2016 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 725 |
Performance Evaluation and Life Cycle Analysis of Earth to Air Heat Exchanger in a Developing Country |
Energy and Buildings |
Md. Shazib Uddin, Raju Ahmed, Masudur Rahman |
2016 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 726 |
Construction and Performance Study of a Rock Bed Integrated Green House Type Solar Air Heater with Solar Dryer |
Journal of Environmental Science, Toxicology and Food Technology |
Md. Shazib Uddin, Masud Parvez and Md. Enamul Haque. |
2016 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 727 |
Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh |
International Conference on Petroleum Engineering 2016 (ICPE-2016) |
Md. Shazib Uddin, Amit Roy, Manjur Morshed, Soumya Mondal and Md.Fajle Rabbi |
2016 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 728 |
Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module |
International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December |
Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed |
2016 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 729 |
Energy and environmental analysis of domestic solar hot water system in Asian developing country context-Thailand |
Journal of Environmental Progress and Sustainable Energy |
Md. Shazib Uddin and S. Kumar |
2015 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 730 |
Assessment of energy consumption and emissions of Jute mill production line in Bangladesh |
International Conference on Mechanical Engineering (ICME)-2015, December |
Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal |
2015 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 731 |
Construction and Performance Study of Underground Assisted Air Heating and Cooling System |
International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December |
Md. Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal and Monjur Morshed |
2015 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 732 |
Design, Construction and Performance Test of a Solar Powered Prototype Vehicle |
International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi |
Md. Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud and Monjur Mourshed |
2015 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 733 |
Energy, Emissions and Environmental Impact Analysis of Wind Turbine Using Life Cycle Assessment Technique |
Journal of Cleaner Production |
Md. Shazib Uddin and S. Kumar |
2014 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 734 |
A comparative study on pyrolysis for liquid oil from different biomass solid wastes |
Procedia Engineering |
Mohammad Nurul Islam, Uzzal Hossain Joardder, SM Najmul Hoque and Md. Shazib Uddin |
2013 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 735 |
A Feasibility Study of Solar-Wind-Diesel Hybrid System in Rural and Remote Areas of Bangladesh |
International Journal of Renewable Energy Research |
Mollah Shahadat Hossain Lipu, Md. Shazib Uddin and Ahad Rahman Miah |
2013 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 736 |
Energy and Emission Analysis of Evacuated Tube Solar Water Heating System Using Life Cycle Approach |
Proceedings in the 15th annual paper meet, Dhaka. |
Md. Shazib Uddin, S. M. Rasid, Amit Roy and S. Kumar |
2013 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 737 |
Design and Construction of Fixed Bed Pyrolysis System and Plum Seed Pyrolysis for Bio-oil Production |
International Journal of Advanced Renewable Energy Research |
Md. Shazib Uddin, Mohammad Uzzal Hossain Joardder and Mohammad Nurul Islam |
2012 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 738 |
The Utilization of Waste Date seed as Bio-Oil and Activated Carbon by Pyrolysis Process |
Journal of Advanced Mechanical Engineering, Vol 2012, ID 316806 |
Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam |
2012 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 739 |
“Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition |
Proceedings of the 5th BSME-ICTE International Conference , December, 2012, Dhaka |
Md. Shazib Uddin, S. M. Najmul Hoque and Murari Mohon Roy |
2012 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 740 |
Pyrolysis of Pine Seed for Liquid Oil Production |
Proceedings of the 4th KKU International Engineering Conference (KKuience 2012),10-12 May, 2012, Thailand |
M. U. H. Joardder , M. N. Islam , M. S. Uddin, M.Hasan |
2012 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 741 |
A Comparative Study on Pyrolysis for Liquid Oil from Different Biomass Solid Wastes. |
5th BSME International Conference on Thermal Engineering, 2012, Dhaka (Procedia Engg) |
Mohammad Nurul Islam, Mohammad U.H.Joardder (Omar), S M Najmul Hoque and Md Uddin |
2012 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 742 |
Renewable Energy Snapshot and Prospect in Bangladesh |
Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 23-24 December, 2011, CUET, Chittagong |
Mohammad Uzzal Hossain Joardder, M.S.Uddin, Barun Kumar Das and Omar Faroque |
2011 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 743 |
Effect of Engine Backpressure on the Performance and Emissions of a CI Engine |
Proceedings of the 9th International Conference on Mechanical Engineering (ICME), 18-20 December, 2011, Dhaka, Bangladesh |
Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Murari Mohon Roy |
2011 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 744 |
Design and Construction of a Simple Viscometer for Incompressible Fluid and Performance Study |
Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), February, 2011, Sylhet |
M. U. H. Joardder*1, M. S. Uddin2 & M. Ahmed |
2011 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 745 |
Fixed Bed Pyrolysis of Biomass Waste for Liquid Oil Production |
Southeast University Journal, Vol 5, No 5, pp 41-48 |
Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin, and Mohammad Nurul Islam |
2010 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 746 |
Thermochemical Conversion of Sugarcane Bagasse into Bio-Crude Oils by Fluidized-Bed Pyrolysis Technology |
Journal of Thermal Science and Technology, vol 5, no 1 |
Mohammad Rofiqul ISLAM, Hiroyuki HANIU, Mohammad Nurul ISLAM, and Md. Shazib Uddin |
2010 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 747 |
Production of Biodiesel in Bangladesh from Inedible Renewable Pithraj Oil (Aphanamixis polystachya) and Experimental Investigation of Methyl Esters as Biodiesel on CI Engine |
International Energy Journal (IEJ), RERIC, 11, 73-80. |
Md. N. Nabi, S. M. N. Hoque and Md. S. Uddin |
2010 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 748 |
“Fixed Bed Pyrolysis of Mahogony Seeds (Swietenia macrophylla) Waste for Liquid Oil Production |
Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna |
Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Md. Abdul Kader |
2010 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 749 |
Methyl Ester Preparation from Peanut Oil and Its Effect on DI Diesel Engine Combustion |
Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna |
Md. Shazib Uddin, Mohammad Uzzal Hossain Joarder, Achinta Kumar Sarker and Ruhul Islam |
2010 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 750 |
Material Picking and Handling Robot”. Proceedings of the Conference on Engineering Research |
Innovation and Education (CERIE), 11-13 January, 2010, Sylhet. |
Shahjada Mahmudul Hasan and Md. Shazib Uddin |
2010 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 751 |
Preparation of Biodiesel from Waste Cook Oil and Performance and Emission Study of a Diesel Engine with Diesel-Biodiesel Blends |
Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet |
Md. Mostafizur Rahman, Md. Shazib Uddin* and S.M. Najmul Hoque |
2010 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 752 |
Prospect of Jatropha Curcas and Pithraj Cultivation in Bangladesh |
Journal of Engineering and Technology, vol 7, no 1, 41-54 |
SM Najmul Hoque, Md. Nurun Nabi and Md. Shazib Uddin |
2009 |
Journal |
ME |
Dr. Md. Shazib Uddin |
| 753 |
Biodiesel from Non-Edible Renewable Karamja Seed Oil and its Effect on DI Diesel Engine Combustion |
Proceedings in the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka |
S.M. Najmul Hoque, Md. Shazib Uddin, Md. Nurun Nabi and Md. Mostafizur Rahman |
2008 |
Conference |
ME |
Dr. Md. Shazib Uddin |
| 754 |
Development of a vacuum double-slope solar still for enhanced freshwater productivity |
Solar Energy (Elsevier) |
S. Saha, M.R.I. Sarker, M.A. Kader, M.M. Ahmed, S.S. Tuly, N.N. Mustafi |
2024 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 755 |
Experimental investigation of optimum bio-oil production parameters through co-pyrolysis of three organic wastes |
Journal of Analytical and Applied Pyrolysis (Elsevier) |
J. Ferdous, M. S. Hossain, M. S. Rahman, M. A. Kader, M. R. Islam |
2024 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 756 |
Thermo chemical conversion of cedar wood by pyrolysis technology for bio-oil |
Biofuels (Taylor & Francis Group) |
M. R. Islam, M. Parveen, M.S. Rahman, J. Ferdous, M.A. Kader, K. Takai |
2023 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 757 |
Wood biomimetics: Capturing and simulating the mesoscale complexity of willow using cross-correlation reconstruction algorithm and 3D printing |
Materials & Design (Elsevier) |
J. Tao, P. Tahmasebi, M.A. Kader, D. Feng, M. Sahimi, P.D. Evans, M. Saadatfar |
2023 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 758 |
Quasi-static response of horse hoof inspired biomimetic structures |
Materials Today: Proceedings (Elsevier) |
M.K. Islam, H. Wang, P.J. Hazell, M.A. Kader, J.P. Escobedo |
2022 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 759 |
Strain-rate dependency and impact dynamics of closed-cell aluminium foams |
Materials Science and Engineering: A (Elsevier) |
M.A. Kader, P.J. Hazell, M.A. Islam, S. Ahmed, M.M. Hossain, J.P. Escobedo, M. Saadatfar |
2021 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 760 |
Mechanical and thermal properties of hybrid fibre-reinforced concrete exposed to recurrent high temperature and aviation oil |
Materials (MDPI) |
M.M. Hossain, S. Al-Deen, M.K. Hassan, S.K. Shill, M.A. Kader, W. Hutchison |
2021 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 761 |
On the improvement of the ballistic performance of a silicon carbide tile through pre-stress: Experiments and simulations |
International Journal of Impact Engineering (Elsevier) |
P.J. Hazell, H. Wang, T. Lin, M. Saleh, V. Luzin, M.A. Kader, M. Saadatfar, A. Ameri, C. Ellis |
2021 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 762 |
Effects of impactor shape on the deformation and energy absorption of closed-cell aluminium foams under low velocity impact |
Materials and Design (Elsevier) |
M.A. Islam, M.A. Kader, P.J. Hazell, J.P. Escobedo, A.D. Brown and M. Saadatfar |
2020 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 763 |
Geometrical and topological evolution of closed-cell structures: An X-ray tomography study |
International Journal of Impact Engineering (Elsevier) |
M.A. Kader, A.D. Brown, P.J. Hazell, V. Robins, J.P. Escobedo and M. Saadatfar |
2020 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 764 |
Novel design of closed-cell foam structures for property enhancement |
Additive Manufacturing (Elsevier) |
M.A. Kader, P.J. Hazell, A.D. Brown, M. Tahtali, S. Ahmed, J.P. Escobedo and M. Saadatfar |
2020 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 765 |
Mechanical Response and Dynamic Deformation Mechanisms of Closed-cell Aluminium Alloy Foams Under Dynamic Loading |
International Journal of Impact Engineering (Elsevier) |
M.A. Islam, A.D. Brown, P.J. Hazell, M.A. Kader, J.P. Escobedo, M. Saadatfar, S. Xu, D. Ruan |
2018 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 766 |
Macro and micro collapse mechanisms of closed-cell aluminium foams during quasi-static compression |
Materials & Design (Elsevier) |
M.A. Kader, M.A. Islam, M. Saadatfar, P.J. Hazell, A.D. Brown, S. Ahmed, J.P. Escobedo |
2017 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 767 |
Biofuel from co-pyrolysis of solid tire waste and rice husk |
Energy Procedia (Elsevier) |
M.S. Hossain, M.R. Islam, M.S. Rahman, M.A. Kader, H. Haniu |
2017 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 768 |
Modelling and characterization of cell collapse in aluminium foams during dynamic loading |
International Journal of Impact Engineering (Elsevier) |
M.A. Kader, M.A. Islam, P.J. Hazell, J.P. Escobedo, M. Saadatfar, A.D. Brown, G.J. Appleby-Thomas |
2016 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 769 |
Investigation of microstructural and mechanical properties of cell walls of closed-cell aluminium alloy foams |
Materials Science and Engineering: A (Elsevier) |
M.A. Islam, M.A. Kader, P.J. Hazell, A.D. Brown, M. Saadatfar, M.Z. Quadir, J.P. Escobedo |
2016 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 770 |
Computational Modelling of Closed-Cell Aluminium Foams to Investigate Structural Deformation under Quasi-Static Loading |
Applied Mechanics and Materials (Scientific.Net) |
M. A. Kader, M. A. Islam, P. J. Hazell, J. P. Escobedo, M. Saadatfar, A. Brown |
2016 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 771 |
Pyrolysis Decomposition of Tamarind Seed for Alternative Fuel |
Bioresource Technology (Elsevier) |
M. A. Kader, M. R. Islam, M. Parveen, H. Haniu, K. Takai |
2013 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 772 |
Development of a pilot scale pyrolysis plant for production of liquid fuel from waste tire |
Mechanical Engineering Research Journal (MERJ), CUET, ISSN: 1990-5491 |
M. A. Kader, M. R. Islam, M. S. Hossain, H. Haniu |
2013 |
Journal |
ME |
Dr. Md. Abdul Kader |
| 773 |
On-chip Self-sensing Piezoelectric Micro-lens Actuator with Feedback Control |
IEEE |
S. M. R. Rasid, A. Michael and H. R. Pota |
2023 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 774 |
Dynamic modeling of a piezoelectric micro-lens actuator with experimental validation |
ELSEVIER |
S. M. R. Rasid, A. Michael and H. R. Pota |
2023 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 775 |
Self-sensing Piezoelectric Micro-lens Actuator |
IEEE |
Syed Mamun R Rasid , Aron Michael , Hemanshu Roy Pota , and Ssu-Han Chen |
2022 |
Conference |
ME |
Dr. Syed Mamun R Rasid |
| 776 |
A robust resonant controller design for MEMS-based multi-layered prestressed piezoelectric cantilever beam |
ELSEVIER |
Muhammad Haq Nawaz, Aron Michael, Hemanshu Roy Pota, Ssu-Han Chen, Syed Mamun R Rasid |
2022 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 777 |
Design and Implementation of Robust Resonant Controller for Piezoelectrically Driven Micro-Lens Actuator |
IEEE |
Syed Mamun R Rasid , Aron Michael , Hemanshu Roy Pota , and Ssu-Han Chen |
2022 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 778 |
Modelling and Experimental Validation of Piezoelectrically Driven Micro-Lens Actuator |
IEEE |
Syed Mamun R Rasid, Aron Michael, Hemanshu Roy Pota, Ssu-Han Chen, Chee Yee Kwok |
2021 |
Conference |
ME |
Dr. Syed Mamun R Rasid |
| 779 |
A Resonant Controller Design of Piezo-electrically Driven Micro-lens Actuator |
IEEE |
Syed Mamun R Rasid, Yifan Wang, Aron Michael, Ssu-Han Chen, Hemanshu Roy Pota |
2020 |
Conference |
ME |
Dr. Syed Mamun R Rasid |
| 780 |
Dynamic Performance Improvement of Piezoelectrically Driven Micro-Lens Actuators |
IEEE |
Syed Mamun R Rasid, Aron Michael, Ssu-Han Chen, Hemanshu Roy Pota, Chee Yee Kwok |
2020 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 781 |
Modeling And Control Of A Magnetic Levitation System Using An Analog Controller |
Zibeline International |
Syed Mamun R Rasid , Md. Belayet Hossain, Md. Emdadul Hoque, Md. Ariful Azam Arif and Md. Sarikat Ali Sarder |
2019 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 782 |
Design and control of active vibration isolation system with an active dynamic vibration absorber operating as accelerometer |
Elsevier |
Syed Mamun R Rasid, Takeshi Mizuno, Yuji Ishino, Masaya Takasaki, Masayuki Hara, Daisuke Yamaguchi |
2019 |
Journal |
ME |
Dr. Syed Mamun R Rasid |
| 783 |
Experimental investigation of cooling, wind velocity, and dust deposition effects on solar PV performance in a tropical climate in Bangladesh. |
Case Studies in Thermal Engineering Volume 50, October 2023, 103409 (Elsevier) |
MS Ahmed, R Karal, BK Das, A Das |
2023 |
Journal |
ME |
Raihan Karal |
| 784 |
Energy consumption behavior analysis and experimental investigation of a novel technique for energy-efficient operation of submersible pumping system used in Barind Tract of Bangladesh |
Springer Netherlands |
Md Sanowar Hossain, Md Emdadul Haque, Mohammad Rofiqul Islam, Md Hasibul Hasan Himel |
2023 |
Journal |
ME |
Md. Hasibul Hasan Himel |
| 785 |
An energy-efficient pumping system for sustainable cities and society: Optimization, mathematical modeling, and, impact assessment |
Energy Reports |
Md Sanowar Hossain, Mohammad Rofiqul Islam, Arnob Das, Hasibul Hasan Himel, Barun K Das, Tamal Krishna Roy, Md Sabit Hasan |
2023 |
Journal |
ME |
Md. Hasibul Hasan Himel |
| 786 |
Energy consumption behavior analysis and investigation of submersible pumping system efficiency in different bore well at Barind trac of Bangladesh |
AIP Conference Proceedings |
Md Sanowar Hossain, Mohammad Rofiqul Islam, Tamal Krishna Roy, Noor Imani Mallik, Md Sabit Hasan, Md Hasibul Hasan Himel |
2023 |
Journal |
ME |
Md. Hasibul Hasan Himel |
| 787 |
Phase Change Materials in Food Dryers: Prospects and Challenges |
John Wiley & Sons, Inc. |
Phase Change Materials in Food Dryers: Prospects and Challenges |
2023 |
Book Chapter |
ME |
Md. Hasibul Hasan Himel |
| 788 |
Mathematical modelling and exergo-environmental analysis of drying potato samples in a waste heat-based convective dryer |
Elsevier |
Mahadi Hasan Masud, Hasibul Hasan Himel, Amit ME Arefin, Anan Ashrabi Ananno, Moshiur Rashid, Peter Dabnichki |
2021 |
Journal |
ME |
Md. Hasibul Hasan Himel |
| 789 |
PERFORMANCE INVESTIGATION OF SUBMERSIBLE PUMPING SYSTEM USING MECHANICAL DEVICES IN DIFFERENT BORE WELL |
ICMERE 2021 |
MS Hossain, MR Islam, MHH Himel, MS Hasan, TK Roy, NI Mallik |
2021 |
Conference |
ME |
Md. Hasibul Hasan Himel |
| 790 |
Autonomous grinding algorithms with future prospect towards SMART manufacturing: A comparative survey |
Journal of Manufacturing Systems |
Md. Riaz Pervez, Md. Hafiz Ahamed, Md. Adnan Ahmed, Shah Mohammed Takrim, Paolo Dario |
2021 |
Journal |
ME |
SHAH MOHAMMED TAKRIM |
| 791 |
Experimental Investigation of the Effect of Al2O3 Nano-particles Incorporated Paraffin Wax of Varying Depth on the Performance of Convex Tubular Solar Still |
The 7th International Conference on Mechanical Engineering and Renewable Energy ICMERE-2023 |
Easmin Sultana , Nusrat Jahan Mishuk ,Md. Bakhtierkhalzi , M Shahriar Iqbal and Md. Hasibul Hasan Sifat |
2023 |
Conference |
ME |
Easmin Sultana |
| 792 |
DEVELOPMENT OF MULTICOMPONENT REAR WING AND IT’S FLOW SIMULATION ON PASSENGER VEHICLE |
The 7th International Conference on Mechanical Engineering and Renewable Energy ICMERE-2023 |
A T M Naser Nahedi Ador, Sudipta Chowdhury, M Shahriar Iqbal, Easmin Sultana |
2023 |
Conference |
ME |
Easmin Sultana |
